Related references
Note: Only part of the references are listed.Electrochemical investigations of cobalt-free perovskite cathode material for intermediate temperature solid oxide fuel cell
Muhammad Sufyan Javed et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Dealing with fuel contaminants in biogas-fed solid oxide fuel cell (SOFC) and molten carbonate fuel cell (MCFC) plants: Degradation of catalytic and electro-catalytic active surfaces and related gas purification methods
Andrea Lanzini et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)
Technical challenges in operating an SOFC in fuel flexible gas turbine hybrid systems: Coupling effects of cathode air mass flow
Nor Farida Harun et al.
APPLIED ENERGY (2017)
Perovskite-type La0.6Sr0.4Co0.2Fe0.8O3, Ba0.5Sr0.5Co0.2Fe0.8O3, and Sm0.5Sr0.5Co0.2Fe0.8O3 cathode materials and their chromium poisoning for solid oxide fuel cells
Fengyu Shen et al.
ELECTROCHIMICA ACTA (2016)
Electrochemical studies of perovskite cathode material for direct natural gas fuel cell
Muhammad Sufyan Javed et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Perovskite as a Cathode Material: A Review of its Role in Solid-Oxide Fuel Cell Technology
Areum Jun et al.
CHEMELECTROCHEM (2016)
Electrochemical oxidation of sour natural gas over La0.4Ce0.6O1.8-La0.4Sr0.6TiO3±δ anode in SOFC: A mechanism study of H2S effects
Milad Roushanafshar et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2015)
Comparative study of La0.6Sr0.4Co0.2Fe0.8O3, Ba0.5Sr0.5Co0.2Fe0.8O3 and Sm0.5Sr0.5Co0.2Fe0.8O3 cathodes and the effect of Sm0.2Ce0.8O2 block layer in solid oxide fuel cells
Fengyu Shen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
La0.6Sr0.4Co0.2Fe0.8O3 cathodes incorporated with Sm0.2Ce0.8O2 by three different methods for solid oxide fuel cells
Fengyu Shen et al.
JOURNAL OF POWER SOURCES (2015)
Theoretical analysis of hydrogen oxidation reaction in solid oxide fuel cell anode based on species territory adsorption model
Tsuyoshi Nagasawa et al.
JOURNAL OF POWER SOURCES (2015)
The chemical oxygen surface exchange and bulk diffusion coefficient determined by impedance spectroscopy of porous La0.58Sr0.4Co0.2Fe0.8O3 - δ (LSCF) cathodes
C. Endler-Schuck et al.
SOLID STATE IONICS (2015)
Engineering Complex, Layered Metal Oxides: High-Performance Nickelate Oxide Nanostructures for Oxygen Exchange and Reduction
Xianfeng Ma et al.
ACS CATALYSIS (2015)
Evaluation of Electrode Overpotentials on Yttrium-Doped Barium Zirconate Electrolyte by Current Interruption Using Three-Electrode Cell
Takayuki Onishi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Layered oxygen-deficient double perovskite as an effcient and stable anode for direct hydrocarbon solid oxide fuel cells
Sivaprakash Sengodan et al.
NATURE MATERIALS (2015)
Synthesis of nano-crystalline Sm0.5Sr0.5Co(Fe)O3-δ perovskite oxides by a microwave-assisted sol-gel combustion process
Liping Li et al.
CERAMICS INTERNATIONAL (2014)
Electrochemical performance of continuously gradient composite cathode fabricated by electro-static slurry spray deposition
Hunhyeong Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
A highly active and long-term stable La-doped BaxSr1-xCo1-yFeyO3-δ cathode for solid-oxide fuel cells
Ju-Sik Kim et al.
JOURNAL OF POWER SOURCES (2014)
(LaSr)xMnO3 cathode stoichiometry effects on electrochemical performance in contact with AISI 441 steel interconnect
Kathy Lu et al.
JOURNAL OF POWER SOURCES (2014)
Oxygen Ion Diffusion and Surface Exchange Properties of the α- and δ-phases of Bi2O3
Ryan D. Bayliss et al.
ADVANCED ENERGY MATERIALS (2014)
Direct-methane solid oxide fuel cells with hierarchically porous Ni-based anode deposited with nanocatalyst layer
Yu Chen et al.
NANO ENERGY (2014)
Thermodynamic and electrical properties of Ba0.5Sr0.5Co0.8Fe0.2O3-δ and La0.6Sr0.4Co0.2Fe0.8O3-δ for intermediate-temperature solid oxide fuel cells
Areum Jun et al.
ELECTROCHIMICA ACTA (2013)
Application of solid oxide fuel cell technology for power generation-A review
Arnab Choudhury et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Characterization and Comparison of Different Cathode Materials for SC-SOFC: LSM, BSCF, SSC, and LSCF
D. Rembelski et al.
FUEL CELLS (2012)
SOFC modeling considering electrochemical reactions at the active three phase boundaries
Martin Andersson et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Extended reaction zone of La0.6Sr0.4Co0.2Fe0.8O3 cathode for solid oxide fuel cell
Zigui Lu et al.
JOURNAL OF POWER SOURCES (2012)
Solid Oxide Fuel Cell Anode Materials for Direct Hydrocarbon Utilization
Xiao-Ming Ge et al.
ADVANCED ENERGY MATERIALS (2012)
In situ sinterable cathode with nanocrystalline La0.6Sr0.4Co0.2Fe0.8O3-δ for solid oxide fuel cells
Young Min Park et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Infrared emissivities and microwave absorption properties of perovskite Sm0.5Sr0.5Co1-xFexO3 (0 ≤ x ≤ 0.5)
Le Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
New Chemical Systems for Solid Oxide Fuel Cells
A. Orera et al.
CHEMISTRY OF MATERIALS (2010)
Surface Modification of Yttria-Stabilized Zirconia Electrolyte by Atomic Layer Deposition
Cheng-Chieh Chao et al.
NANO LETTERS (2009)
Comments on explosion problems for hydrogen safety
Hoi Dick Ng et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2008)
Three-phase boundary length in solid-oxide fuel cells: A mathematical model
Vinod M. Janardhanan et al.
JOURNAL OF POWER SOURCES (2008)
Synthesis and characterization of La0.6Sr0.4Co0.2Fe0.8O3-delta and Ba0.5Sr0.5Co0.8Fe0.2O3-delta
P. Ried et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Electrochemical performance of LSCF based thin film cathodes prepared by spray pyrolysis
Daniel Beckel et al.
SOLID STATE IONICS (2007)
Structure and electrochemical properties of SM0.5Sr0.5CO1-xFexO3 -δ cathodes for solid oxide fuel cells
Hong Lv et al.
SOLID STATE IONICS (2006)
Direct operation of solid oxide fuel cells with methane fuel
YB Lin et al.
SOLID STATE IONICS (2005)
A thermally self-sustained micro solid-oxide fuel-cell stack with high power density
ZP Shao et al.
NATURE (2005)
A high-performance cathode for the next generation of solid-oxide fuel cells
ZP Shao et al.
NATURE (2004)
Materials for fuel-cell technologies
BCH Steele et al.
NATURE (2001)
Design and part-load performance of a hybrid system based on a solid oxide fuel cell reactor and a micro gas turbine
P Costamagna et al.
JOURNAL OF POWER SOURCES (2001)
Impedance of solid oxide fuel cell LSM/YSZ composite cathodes
MJ Jorgensen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)