Journal
ENERGY & FUELS
Volume 32, Issue 7, Pages 7868-7877Publisher
AMER CHEMICAL SOC
DOI: 10.1021/acs.energyfuels.8b01133
Keywords
-
Categories
Funding
- King Fahd University of Petroleum and Minerals (KFUPM) under DSR project [IN161027]
- SABIC [ME 2394]
Ask authors/readers for more resources
Premixed oxygen-enriched air-methane flames (CH4/O-2/N-2) are compared with their oxy-methane counterparts (CH4/O-2/CO2) in the same model gas-turbine combustor and under identical conditions of oxygen fraction (OF = 21-70 vol %) and equivalence ratio (phi = 0.2-1.0). The flow rates of nonpreheated reactant gases were adjusted for each tested flame to sustain a common bulk velocity at burner throat throughout the whole study to maintain similar flow conditions and turbulence intensities for all isothermal flow fields. The flashback and blowout limits were quantified to identify the combustor stability maps within the OF-phi space. The adiabatic flame temperature (T-ad) was also mapped over the same test ranges for both N-2 and CO2 flames. The effect of T-ad on flame macrostructure and stabilization mode was studied in detail by imaging selected flames. The following novel findings were found to apply to both N-2 and CO2 flames at common inlet bulk velocity: Their stable combustion zones can both be characterized by T-ad only, although they have different T-ad maps. Combustion is thus governed mainly by the reaction kinetics (especially near the flashback limits) under similar cold flow conditions. Both N-2 and CO2 flames undergo the same changes in macrostructure and stabilization mode as T-ad is increased from the blowout limits to the flashback ones. Stable flames of different phi and OF but the same T-ad have identical shapes, which shows the direct dependence of flame macrostructure and stabilization mode on T-ad under similar cold flow conditions. Both N-2 and CO, stability maps can be subdivided into subzones based on T-ad only, where each zone has a single prevailing flame macrostructure irrespective of cia and OF. This is yet another proof that T-ad is an excellent tool for predicting flame macrostructure at constant inlet bulk velocity. On the basis of these findings, this study recommends to design and operate future oxy-fuel gas-turbine combustors based on T-ad (and not OF or particularly at high and medium loads away from blowout, following the existing common practice among manufacturers of conventional lean-premixed air-fuel gas turbines to quantify combustor performance in terms of T-ad.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available