Ultrasonic welding of carbon/epoxy and carbon/PEEK composites through a PEI thermoplastic coupling layer

This paper investigates welding of carbon/epoxy and carbon/PEEK composites using the following procedure. Firstly, the carbon/epoxy composite was made weldable through a very thin PEI thermoplastic film co-cured on its surface. During the curing cycle, the PEI resin and the components of the epoxy resin system partially diffused into each other generating a gradient interphase between the original epoxy and PEI resins. Subsequently, the carbon/PEEK composite adherend was welded onto the PEI-rich surface of the weldable carbon/epoxy adherend, exploiting the total miscibility between PEI and PEEK. Thermal degradation of the carbon/epoxy adherend during the welding process was avoided via the ultra-short heating times enabled by the ultrasonic welding technology. In this research, mechanical testing was used to evaluate the weld strength relative to reference joints. Additionally, cross-section scanning electron microscopy was used to assess the morphology of the PEI/epoxy interphase before and after the welding process.