Related references
Note: Only part of the references are listed.Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing
Caroline A. Murphy et al.
POLYMER COMPOSITES (2018)
Liquid Deposition Modeling: a promising approach for 3D printing of wood
Michael Rosenthal et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2018)
All-in-One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels
Jieping Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Gelation mechanism of cellulose nanofibre gels: A colloids and interfacial perspective
Llyza Mendoza et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)
Applicability of protein and fiber-rich food materials in extrusion-based 3D printing
Martina Lille et al.
JOURNAL OF FOOD ENGINEERING (2018)
3D bioprinting of cellulose with controlled porous structures from NMMO
Lei Li et al.
MATERIALS LETTERS (2018)
From nano to micro to macro: Electrospun hierarchically structured polymeric fibers for biomedical applications
Guang Yang et al.
PROGRESS IN POLYMER SCIENCE (2018)
Direct Ink Write 3D Printed Cellulose Nanofiber Aerogel Structures with Highly Deformable, Shape Recoverable, and Functionalizable Properties
Vincent C. F. Li et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Surface tailoring and design-driven prototyping of fabrics with 3D-printing: An all-cellulose approach
Tiia-Maria Tenhunen et al.
MATERIALS & DESIGN (2018)
Thermal and mechanical behavior of biocomposites using additive manufacturing
Jorge I. Montalvo Navarrete et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2018)
Preparation of cellulose nanofibers using green and sustainable chemistry
Akira Isogai et al.
CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2018)
Research needs and recommendations on environmental implications of additive manufacturing
David Rejeski et al.
ADDITIVE MANUFACTURING (2018)
Assessing bioink shape fidelity to aid material development in 3D bioprinting
A. Ribeiro et al.
BIOFABRICATION (2018)
Three-dimensional plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions
Kathleen Schuetz et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
Progress in 3D Printing of Carbon Materials for Energy-Related Applications
Kun Fu et al.
ADVANCED MATERIALS (2017)
Alginate Sulfate-Nanocellulose Bioinks for Cartilage Bioprinting Applications
Michael Mueller et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Spinning of Cellulose Nanofibrils into Filaments: A Review
Meri J. Lundahl et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Shear-Induced Breakup of Cellulose Nanocrystal Aggregates
Hua-Neng Xu et al.
LANGMUIR (2017)
Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants
Wiebke Kempin et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2017)
Preparation of 3D printable micro/nanocellulose-polylactic acid (MNC/PLA) composite wire rods with high MNC constitution
Zhiguo Wang et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing
Ju Dong et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2017)
Cocoa Shell Waste Biofilaments for 3D Printing Applications
Thi Nga Tran et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
'Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art
Stuart Kyle et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Cellulose Nanofibril-Based Coatings of Woven Cotton Fabrics for Improved Inkjet Printing with a Potential in E-Textile Manufacturing
Oleksandr Nechyporchuk et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Enzymatic-Assisted Modification of Thermomechanical Pulp Fibers To Improve the Interfacial Adhesion with Poly(lactic acid) for 3D Printing
Daniel Filgueira et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Nanocellulosic materials as bioinks for 3D bioprinting
Carmen C. Piras et al.
BIOMATERIALS SCIENCE (2017)
Nanocellulose-based conductive materials and their emerging applications in energy devices - A review
Xu Du et al.
NANO ENERGY (2017)
3D printing technologies for electrochemical energy storage
Feng Zhang et al.
NANO ENERGY (2017)
Review of 4D Printing Materials and their Properties
Dong-Gap Shin et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)
Tailored and Integrated Production of Carboxylated Cellulose Nanocrystals (CNC) with Nanofibrils (CNF) through Maleic Acid Hydrolysis
Ruibin Wang et al.
CHEMNANOMAT (2017)
Additive Manufacturing of Cellulosic Materials with Robust Mechanics and Antimicrobial Functionality
Sebastian W. Pattinson et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink
Duong Nguyen et al.
SCIENTIFIC REPORTS (2017)
Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone
Xuyu Chai et al.
SCIENTIFIC REPORTS (2017)
Conductive Cellulose Composites with Low Percolation Threshold for 3D Printed Electronics
Jae Sung Park et al.
SCIENTIFIC REPORTS (2017)
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Vincent Chi-Fung Li et al.
SCIENTIFIC REPORTS (2017)
Nanocellulose and its Composites for Biomedical Applications
Ahu Gumrah Dumanli
CURRENT MEDICINAL CHEMISTRY (2017)
A review on additive manufacturing of polymer-fiber composites
Pedram Parandoush et al.
COMPOSITE STRUCTURES (2017)
Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability
Naomi Paxton et al.
BIOFABRICATION (2017)
Biomimetic Inks Based on Cellulose Nanofibrils and Cross-Linkable Xylans for 3D Printing
Kajsa Markstedt et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Analysis of rheology and wall depletion of microfibrillated cellulose suspension using optical coherence tomography
Janne Lauri et al.
CELLULOSE (2017)
Cellulose-Nanofiber-Enabled 3D Printing of a Carbon-Nanotube Microfiber Network
Yuanyuan Li et al.
SMALL METHODS (2017)
3D Printing of Photocurable Cellulose Nanocrystal Composite for Fabrication of Complex Architectures via Stereolithography
Napolabel B. Palaganas et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Thermally Stable Cellulose Nanocrystals toward High-Performance 2D and 3D Nanostructures
Chao Jia et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Matrix-Assisted Three-Dimensional Printing of Cellulose Nanofibers for Paper Microfluidics
Sungchul Shin et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D-Printable Bioactivated Nanocellulose-Alginate Hydrogels
Jenni Leppiniemi et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D Bioprinting of Highly Thixotropic Alginate/Methylcellulose Hydrogel with Strong Interface Bonding
Huijun Li et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Lignin-coated cellulose nanocrystal filled methacrylate composites prepared via 3D stereolithography printing: Mechanical reinforcement and thermal stabilization
Xinhao Feng et al.
CARBOHYDRATE POLYMERS (2017)
3D printing of nano-cellulosic biomaterials for medical applications
Sahar Sultan et al.
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)
Using a fully recyclable dicarboxylic acid for producing dispersible and thermally stable cellulose nanomaterials from different cellulosic sources
Chao Jia et al.
CELLULOSE (2017)
Increased lipid accumulation and adipogenic gene expression of adipocytes in 3D bioprinted nanocellulose scaffolds
I. Henriksson et al.
BIOFABRICATION (2017)
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Yubo Tao et al.
MATERIALS (2017)
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Gilberto Siqueira et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Investigation into the material properties of wooden composite structures with in-situ fibre reinforcement using additive manufacturing
Kate Pitt et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Tomasz Jungst et al.
CHEMICAL REVIEWS (2016)
Ten challenges in 3D printing
William Oropallo et al.
ENGINEERING WITH COMPUTERS (2016)
Use of wood powder and adhesive as a mixture for 3D printing
Mirko Kariz et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2016)
Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity
Andreas Blaeser et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Assessing and Reducing the Toxicity of 3D-Printed Parts
Shirin Mesbah Oskui et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS (2016)
Advanced Bioinks for 3D Printing: A Materials Science Perspective
David Chimene et al.
ANNALS OF BIOMEDICAL ENGINEERING (2016)
Cellulose Nanofibril Hydrogel Tubes as Sacrificial Templates for Freestanding Tubular Cell Constructs
Jose Guillermo Torres-Rendon et al.
BIOMACROMOLECULES (2016)
Current Progress in Rheology of Cellulose Nanofibril Suspensions
Oleksandr Nechyporchuk et al.
BIOMACROMOLECULES (2016)
Human stem cell decorated nanocellulose threads for biomedical applications
Henrikki Mertaniemi et al.
BIOMATERIALS (2016)
Controlling the Size and Film Strength of Individualized Cellulose Nanofibrils Prepared by Combined Enzymatic Pretreatment and High Pressure Microfluidization
Qianqian Wang et al.
BioResources (2016)
A new photoelectric ink based on nanocellulose/CdS quantum dots for screen-printing
Aimin Tang et al.
CARBOHYDRATE POLYMERS (2016)
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Hongli Zhu et al.
CHEMICAL REVIEWS (2016)
Additive manufacturing of biologically-inspired materials
Andre R. Studart
CHEMICAL SOCIETY REVIEWS (2016)
Review of the recent developments in cellulose nanocomposite processing
Kristiina Oksman et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents
Deshani H. A. T. Gunasekera et al.
FARADAY DISCUSSIONS (2016)
Hydrogels based on cellulose and chitin: fabrication, properties, and applications
Xiaoping Shen et al.
GREEN CHEMISTRY (2016)
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole Jonathan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Nanofibril Alignment in Flow Focusing: Measurements and Calculations
Karl M. O. Hakansson et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2016)
Time-dependent rheological behaviour of bacterial cellulose hydrogel
Xing Gao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Use of nanocellulose in printed electronics: a review
Fanny Hoeng et al.
NANOSCALE (2016)
Recent developments in 3D printable composite materials
Umme Kalsoom et al.
RSC ADVANCES (2016)
Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents
Deshani H. A. T. Gunasekera et al.
FARADAY DISCUSSIONS (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
A. Le Duigou et al.
MATERIALS & DESIGN (2016)
Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures
Karl M. O. Hakansson et al.
ADVANCED MATERIALS TECHNOLOGIES (2016)
Research on the printability of hydrogels in 3D bioprinting
Yong He et al.
SCIENTIFIC REPORTS (2016)
Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells
Liliang Ouyang et al.
BIOFABRICATION (2016)
Bioink properties before, during and after 3D bioprinting
Katja Hoelzl et al.
BIOFABRICATION (2016)
3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications
Kajsa Markstedt et al.
BIOMACROMOLECULES (2015)
Ion-Mediated Gelation of Aqueous Suspensions of Cellulose Nanocrystals
Mokit Chau et al.
BIOMACROMOLECULES (2015)
Cellulose acetate based 3-dimensional electrospun scaffolds for skin tissue engineering applications
Deniz Atila et al.
CARBOHYDRATE POLYMERS (2015)
Tailoring the yield and characteristics of wood cellulose nanocrystals (CNC) using concentrated acid hydrolysis
Liheng Chen et al.
CELLULOSE (2015)
Use of Microfibrillated Cellulose/Lignosulfonate Blends as Carbon Precursors: Impact of Hydrogel Rheology on 3D Printing
Ying Shao et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
Shaban A. Khaled et al.
JOURNAL OF CONTROLLED RELEASE (2015)
Online determination of anisotropy during cellulose nanofibril assembly in a flow focusing device
Karl M. O. Hakansson
RSC ADVANCES (2015)
3D Bioprinting of Carboxymethylated-Periodate Oxidized Nanocellulose Constructs for Wound Dressing Applications
Adam Rees et al.
BIOMED RESEARCH INTERNATIONAL (2015)
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
D. M. Kirchmajer et al.
JOURNAL OF MATERIALS CHEMISTRY B (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
3D-Printed Wood: Programming Hygroscopic Material Transformations
David Correa et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2015)
Additive Manufacture of Ceramics Components by Inkjet Printing
Brian Derby
ENGINEERING (2015)
Functional Materials from Cellulose-Derived Liquid-Crystal Templates
Michael Giese et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
The influence of printing parameters on cell survival rate and printability in microextrusion-based 3D cell printing technology
Yu Zhao et al.
BIOFABRICATION (2015)
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Gernot Hochleitner et al.
BIOFABRICATION (2015)
Metal Cation Cross-Linked Nanocellulose Hydrogels as Tissue Engineering Substrates
Nicole E. Zander et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Highly Conductive Microfiber of Graphene Oxide Templated Carbonization of Nanofibrillated Cellulose
Yuanyuan Li et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Bethany C. Gross et al.
ANALYTICAL CHEMISTRY (2014)
Combined Mechanical Destruction and Alkaline Pretreatment of Wheat Straw for Enhanced Enzymatic Saccharification
Qianqian Wang et al.
BioResources (2014)
Rheological properties of micro-/nanofibrillated cellulose suspensions: Wall-slip and shear banding phenomena
Oleksandr Nechyporchuk et al.
CARBOHYDRATE POLYMERS (2014)
Key advances in the chemical modification of nanocelluloses
Youssef Habibi
CHEMICAL SOCIETY REVIEWS (2014)
Kinetics of Strong Acid Hydrolysis of a Bleached Kraft Pulp for Producing Cellulose Nanocrystals (CNCs)
Qianqian Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Tuning Cellulose Nanocrystal Gelation with Polysaccharides and Surfactants
Zhen Hu et al.
LANGMUIR (2014)
Toward Nanoscale Three-Dimensional Printing: Nanowalls Built of Electrospun Nanofibers
Minhee Lee et al.
LANGMUIR (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Hydrodynamic alignment and assembly of nanofibrils resulting in strong cellulose filaments
Karl M. O. Hakansson et al.
NATURE COMMUNICATIONS (2014)
3D Bioprinting of Cellulose Structures from an Ionic Liquid
Kajsa Markstedt et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2014)
Strong and Optically Transparent Films Prepared Using Cellulosic Solid Residue Recovered from Cellulose Nanocrystals Production Waste Stream
Qianqian Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Ultralight, Flexible, and Fire-Resistant Carbon Nanofiber Aerogels from Bacterial Cellulose
Zhen-Yu Wu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
Filler-nanocellulose substrate for printed electronics: experiments and model approach to structure and conductivity
Antti Penttila et al.
CELLULOSE (2013)
Wood based bulk material in 3D printing processes for applications in construction
Klaudius Henke et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2013)
Evaluation of hydrogels for bio-printing applications
Sean V. Murphy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Three-dimensional drug printing: A structured review
Iulia Ursan et al.
JOURNAL OF THE AMERICAN PHARMACISTS ASSOCIATION (2013)
Influence of degree of sulfation on the rheology of cellulose nanocrystal suspensions
Sadaf Shafiei-Sabet et al.
RHEOLOGICA ACTA (2013)
A physical cross-linking process of cellulose nanofibril gels with shear-controlled fibril orientation
Andreas B. Fall et al.
SOFT MATTER (2013)
Bio-ink properties and printability for extrusion printing living cells
Johnson H. Y. Chung et al.
BIOMATERIALS SCIENCE (2013)
Reinforcement of Stereolithographic Resins for Rapid Prototyping with Cellulose Nanocrystals
Sandeep Kumar et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Morphological development of cellulose fibrils of a bleached eucalyptus pulp by mechanical fibrillation
Q. Q. Wang et al.
CELLULOSE (2012)
Approaching zero cellulose loss in cellulose nanocrystal (CNC) production: recovery and characterization of cellulosic solid residues (CSR) and CNC
Q. Q. Wang et al.
CELLULOSE (2012)
Energy and environmental nanotechnology in conductive paper and textiles
Liangbing Hu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Modeling the rheology of nanocellulose suspensions
Antti Puisto et al.
NORDIC PULP & PAPER RESEARCH JOURNAL (2012)
Nanocelluloses: A New Family of Nature-Based Materials
Dieter Klemm et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Cellulose nanomaterials review: structure, properties and nanocomposites
Robert J. Moon et al.
CHEMICAL SOCIETY REVIEWS (2011)
TEMPO-oxidized cellulose nanofibers
Akira Isogai et al.
NANOSCALE (2011)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Cellulose Nanocrystals: Chemistry, Self-Assembly, and Applications
Youssef Habibi et al.
CHEMICAL REVIEWS (2010)
Flocculation of cellulose fibres: new comparison of crowding factor with percolation and effective-medium theories
A. Celzard et al.
CELLULOSE (2009)
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Deng-Guang Yu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2009)
Structure and mechanical properties of cellulose based scaffolds fabricated by selective laser sintering
Gean V. Salmoria et al.
POLYMER TESTING (2009)
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Tsuguyuki Saito et al.
BIOMACROMOLECULES (2007)
Cellulose: Fascinating biopolymer and sustainable raw material
D Klemm et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2005)
Rapid laminated tooling
DI Wimpenny et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Share Paper
