Exploiting Ring-Opening Aminolysis-Condensation as a Polymerization Pathway to Structurally Diverse Biobased Polyamides

A pathway to biobased polyamides (PAs) via ring-opening aminolysis-condensation (ROAC) under benign conditions with diverse structure was designed. Ethylene brassylate (EB), a plant oil-derived cyclic dilactone, was used in combination with an array of diamines of diverse chemical structure, and ring-opening of the cyclic dilactone EB was revealed as a driving force for the reaction. The ROAC reactions were adjusted, and reaction conditions of 100 degrees C under atmospheric pressure using 1,5,7-triazabicyclo[4.4.0]-dec-5-ene (TBD) as a catalyst for 24 h were optimal. The structures of the polyamides were confirmed by mass spectroscopy, FTIR, and NMR, and the PAs had viscosity average molecular weights (M-eta) of similar to 5-8 kDa. Glassy or semicrystalline PAs with glass transition temperatures between 48 and 55 degrees C, melting temperatures of 120-200 degrees C for the semicrystalline PAs, and thermal stabilities above 400 degrees C were obtained and were comparable to the existing PAs with similar structures. As a proof-of-concept of their usage, one of the PAs was shown to form fibers by electrospinning and films by melt pressing. Compared to conventional methods for PA synthesis, the ROAC route portrayed a reaction temperature at least 60-80 degrees C lower, could be readily carried out without a low-pressure environment, and eliminated the use of solvents and toxic chemicals. Together with the plant oil-derived monomer (EB), the ROAC route provided a sustainable alternative to design biobased PAs. .