Direct Electrochemical Observation of Single Platinum Cluster Electrocatalysis on Ultramicroelectrodes

We demonstrate a method to electrodeposit and observe the electrocatalysis of small platinum clusters and nanoparticles (NPs) in real time as they form on an ultramicroelectrode (UME). Water droplets (r(drop) similar to 700 nm), stabilized by sodium dodecyl sulfate (SDS), were suspended in a solution of dichloromethane (DCM) and tetrabutylammonium perchlorate ([TBA][ClO4]), which was used to mitigate charge balance during droplet electrolysis. When droplets collided with an UME biased sufficiently negative to drive water reduction, large blips of current were observed. Droplets were synthesized with varying concentrations of H2PtCl6 (from 24.4 mM to 32 nM), which can be reduced to Pt-0 at 0.8 V more positive than water reduction on a Au or C UME. The observation of current blips synthesized with mM amounts of H2PtCl6 indicated water droplets deliver H2PtCl6 to the electrode surface, where a cathodic potential caused Pt NPs to form. The formation of clusters was observed by biasing the electrode potential more negative than water reduction on Pt but more positive than water reduction on Au, giving current blips for droplets containing mu M to nM amounts of H2PtCl6. These blips corresponded to the electrocatalysis of thousands to tens of atoms (clusters). Droplet electrolysis allows for a large amplification such that the electrocatalysis of clusters can be observed in real time. Single, isolated clusters were further characterized voltammetrically on carbon fiber UMEs. The isolation step used the amperometric method, which unambiguously depicted cluster formation in real time. Carbon was chosen due to its large potential window and slow kinetics toward many inner-sphere reactions, such as proton reduction, used in this study. Voltammetric characterization of proton reduction in HClO4 and NaClO4 allowed for cluster size analysis using the limiting current. The reduction of proton on the clusters (E-1/2 similar to -0.6 V vs Ag/AgCl) occurred at ca. 400 mV more negative than bulk, polycrystalline platinum.