Stretchable Conductive Fibers Based on a Cracking Control Strategy for Wearable Electronics

Stretchability plays an important role in wearable devices. Repeated stretching often causes the conductivity dramatically decreasing due to the damage of the inner conductive layer, which is a fatal and undesirable issue in this field. Herein, a convenient rolling strategy to prepare conductive fibers with high stretchability based on a spiral structure is proposed. With the simple rolling design, low resistance change can be obtained due to confined elongation nof the gold thin-film cracks, which is caused by the encapsulated effect in such a structure. When the fiber is under 50% strain, the resistance change (R/R-0) is about 1.5, which is much lower than a thin film at the same strain (R/R-0 approximate to 10). The fiber can even afford a high load strain (up to 100%), but still retain good conductivity. Such a design further demonstrates its capability when it is used as a conductor to confirm signal transfer with low attenuation, which can also be woven into textile to fabricate wearable electronics.