Related references
Note: Only part of the references are listed.Commercializing Lithium Sulfur Batteries: Are We Doing the Right Research?
Tom Cleaver et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Catalytic Effects in Lithium-Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect
Donghai Liu et al.
ADVANCED SCIENCE (2018)
Polysulfide immobilization and conversion on a conductive polar MoC@MoOx material for lithium-sulfur batteries
Ruopian Fang et al.
ENERGY STORAGE MATERIALS (2018)
Phosphorene as a Polysulfide Immobilizer and Catalyst in High-Performance Lithium-Sulfur Batteries
Lu Li et al.
ADVANCED MATERIALS (2017)
The Development and Future of Lithium Ion Batteries
George E. Blomgren
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Greatly Suppressed Shuttle Effect for Improved Lithium Sulfur Battery Performance through Short Chain Intermediates
Na Xu et al.
NANO LETTERS (2017)
Twinborn TiO2-TiN heterostructures enabling smooth trapping-diffusion-conversion of polysulfides towards ultralong life lithium-sulfur batteries
Tianhong Zhou et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li-S battery
Jie Liu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Electrocatalysis of polysulfide conversion by sulfur-deficient MoS2 nanoflakes for lithium-sulfur batteries
Haibin Lin et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Nitrogen-doped microporous carbon from polyaspartic acid bonding separator for high performance lithium-sulfur batteries
Xiangyang Zhou et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2017)
Rational design of graphene @ nitrogen and phosphorous dual-doped porous carbon sandwich-type layer for advanced lithium-sulfur batteries
Xiangyang Zhou et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Structural Dependence of the Sulfur Reduction Mechanism in Carbon-Based Cathodes for Lithium-Sulfur Batteries
Juan C. Burgos et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
Rational Design of Lithium-Sulfur Battery Cathodes Based on Experimentally Determined Maximum Active Material Thickness
Michael J. Klein et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
In Situ Observation and Electrochemical Study of Encapsulated Sulfur Nanoparticles by MoS2 Flakes
Wei Tang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Electrodeposition Kinetics in Li-S Batteries: Effects of Low Electrolyte/Sulfur Ratios and Deposition Surface Composition
Frank Y. Fan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Revealing the Electrochemical Charging Mechanism of Nanosized Li2S by in Situ and Operando X-ray Absorption Spectroscopy
Liang Zhang et al.
NANO LETTERS (2017)
Polysulfide-Breathing/Dual-Conductive, Heterolayered Battery Separator Membranes Based on 0D/1D Mingled Nanomaterial Composite Mats
Jeong-Hoon Kim et al.
NANO LETTERS (2017)
Effect of fibrous separators on the performance of lithium-sulfur batteries
S. Choudhury et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)
Tungsten Disulfide Catalysts Supported on a Carbon Cloth Interlayer for High Performance Li-S Battery
Jungjin Park et al.
ADVANCED ENERGY MATERIALS (2017)
Review on High-Loading and High-Energy Lithium-Sulfur Batteries
Hong-Jie Peng et al.
ADVANCED ENERGY MATERIALS (2017)
Nanostructured cathode materials for lithium-sulfur batteries: progress, challenges and perspectives
Sarish Rehman et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Rational design of exfoliated 1T MoS2@CNT-based bifunctional separators for lithium sulfur batteries
Y. C. Jeong et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Facilitating the redox reaction of polysulfides by an electrocatalytic layer-modified separator for lithium-sulfur batteries
Pengjian Zuo et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Balancing the chemisorption and charge transport properties of the interlayer in lithium-sulfur batteries
Liuqing Yang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Cathode materials for lithium-sulfur batteries: a practical perspective
Ali Eftekhari et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
A novel bi-functional double-layer rGO-PVDF/PVDF composite nanofiber membrane separator with enhanced thermal stability and effective polysulfide inhibition for high-performance lithium-sulfur batteries
Pei Zhu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Freestanding carbon encapsulated mesoporous vanadium nitride nanowires enable highly stable sulfur cathodes for lithium-sulfur batteries
Xingxing Li et al.
NANO ENERGY (2017)
Propelling polysulfides transformation for high-rate and long-life lithiumsulfur batteries
Cheng Zheng et al.
NANO ENERGY (2017)
An in-plane heterostructure of graphene and titanium carbide for efficient polysulfide confinement
Tianhong Zhou et al.
NANO ENERGY (2017)
More Reliable Lithium-Sulfur Batteries: Status, Solutions and Prospects
Ruopian Fang et al.
ADVANCED MATERIALS (2017)
Cationic two-dimensional sheets for an ultralight electrostatic polysulfide trap toward high-performance lithium-sulfur batteries
Yuyuan Zhou et al.
ENERGY STORAGE MATERIALS (2017)
A carbon nanofiber@mesoporous δ-MnO2 nanosheet-coated separator for high-performance lithium-sulfur batteries
Yanqing Lai et al.
ENERGY STORAGE MATERIALS (2017)
Strong adsorption of lithium polysulfides on ethylenediamine-functionalized carbon fiber paper interlayer providing excellent capacity retention of lithium-sulfur batteries
Siriroong Kaewruang et al.
CARBON (2017)
Layer-Tunable Phosphorene Modulated by the Cation Insertion Rate as a Sodium-Storage Anode
Zhaodong Huang et al.
ADVANCED MATERIALS (2017)
Lithium Bond Chemistry in Lithium-Sulfur Batteries
Ting-Zheng Hou et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long-Life Lithium-Sulfur Batteries
Zahid Ali Ghazi et al.
ADVANCED MATERIALS (2017)
Nanostructured Metal Oxides and Sulfides for Lithium-Sulfur Batteries
Xue Liu et al.
ADVANCED MATERIALS (2017)
Ultrathin MnO2/Graphene Oxide/Carbon Nanotube Interlayer as Efficient Polysulfide-Trapping Shield for High-Performance Li-S Batteries
Weibang Kong et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Sulfonic Groups Originated Dual-Functional Interlayer for High Performance Lithium-Sulfur Battery
Yang Lu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Decoration of Silica Nanoparticles on Polypropylene Separator for Lithium-Sulfur Batteries
Jing Li et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Polysulfide-Scission Reagents for the Suppression of the Shuttle Effect in Lithium-Sulfur Batteries
Wuxing Hua et al.
ACS NANO (2017)
Sulfur Embedded in a Mesoporous Carbon Nanotube Network as a Binder-Free Electrode for High-Performance Lithium Sulfur Batteries
Li Sun et al.
ACS NANO (2016)
Hierarchical sulfur-impregnated hydrogenated TiO2 mesoporous spheres comprising anatase nanosheets with highly exposed (001) facets for advanced Li-S batteries
Changzhou Yuan et al.
NANOTECHNOLOGY (2016)
Effective Stabilization of a High-Loading Sulfur Cathode and a Lithium-Metal Anode in Li-S Batteries Utilizing SWCNT-Modulated Separators
Chi-Hao Chang et al.
SMALL (2016)
Tuning Transition Metal Oxide-Sulfur Interactions for Long Life Lithium Sulfur Batteries: The Goldilocks Principle
Xiao Liang et al.
ADVANCED ENERGY MATERIALS (2016)
High-Energy, High-Rate, Lithium-Sulfur Batteries: Synergetic Effect of Hollow TiO2-Webbed Carbon Nanotubes and a Dual Functional Carbon-Paper Interlayer
Jang-Yeon Hwang et al.
ADVANCED ENERGY MATERIALS (2016)
Sulfur-Based Catholyte Solution with a Glass-Ceramic Membrane for Li-S Batteries
Lina Wang et al.
CHEMELECTROCHEM (2016)
Synergistically Enhanced Polysulfide Chemisorption Using a Flexible Hybrid Separator with N and S Dual-Doped Mesoporous Carbon Coating for Advanced Lithium-Sulfur Batteries
Juan Balach et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Performance-Enhancing Asymmetric Separator for Lithium-Sulfur Batteries
Joanna Conder et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Synergistic Ultrathin Functional Polymer-Coated Carbon Nanotube Interlayer for High Performance Lithium-Sulfur Batteries
Joo Hyun Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Kinetically Enhanced Electrochemical Redox of Polysulfides on Polymeric Carbon Nitrides for Improved Lithium-Sulfur Batteries
Ji Liang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
A Polysulfide-Trapping Interface for Electrochemically Stable Sulfur Cathode Development
Sheng-Heng Chung et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Suppressed Polysulfide Crossover in Li-S Batteries through a High-Flux Graphene Oxide Membrane Supported on a Sulfur Cathode
Mandokht Shaibani et al.
ACS NANO (2016)
Advanced Lithium-Sulfur Batteries Enabled by a Bio-Inspired Polysulfide Adsorptive Brush
Teng Zhao et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
A Strategy for Configuration of an Integrated Flexible Sulfur Cathode for High-Performance Lithium-Sulfur Batteries
Hongqiang Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium-Sulfur Batteries
Hong-Jie Peng et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)
Highly porous polyacrylonitrile/graphene oxide membrane separator exhibiting excellent anti-self-discharge feature for high-performance lithium-sulfur batteries
Jiadeng Zhu et al.
CARBON (2016)
Porous graphene oxide/carbon nanotube hybrid films as interlayer for lithium-sulfur batteries
Jian-Qiu Huang et al.
CARBON (2016)
Enhanced polysulphide redox reaction using a RuO2 nanoparticle-decorated mesoporous carbon as functional separator coating for advanced lithium-sulphur batteries
J. Balach et al.
CHEMICAL COMMUNICATIONS (2016)
Designing high-energy lithium-sulfur batteries
Zhi Wei Seh et al.
CHEMICAL SOCIETY REVIEWS (2016)
Advanced Separators for Lithium-Ion and Lithium-Sulfur Batteries: A Review of Recent Progress
Yinyu Xiang et al.
CHEMSUSCHEM (2016)
In-situ Fabrication of a Freestanding Acrylate-based Hierarchical Electrolyte for Lithium-sulfur Batteries
M. Liu et al.
ELECTROCHIMICA ACTA (2016)
High rate and stable cycling of lithium-sulfur batteries with carbon fiber cloth interlayer
Yuxiang Yang et al.
ELECTROCHIMICA ACTA (2016)
Kinetically-enhanced polysulfide redox reactions by Nb2O5 nanocrystals for high-rate lithium-sulfur battery
Yingqing Tao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
A review on separators for lithium-sulfur battery: Progress and prospects
Nanping Deng et al.
JOURNAL OF POWER SOURCES (2016)
Reconfiguration of lithium sulphur batteries: Enhancement of Li-S cell performance by employing a highly porous conductive separator coating
Ulrich Stoeck et al.
JOURNAL OF POWER SOURCES (2016)
Electronic and ionic co-conductive coating on the separator towards high-performance lithium-sulfur batteries
Qingsong Wang et al.
JOURNAL OF POWER SOURCES (2016)
Nitrogen, sulfur-codoped graphene sponge as electroactive carbon interlayer for high-energy and -power lithium-sulfur batteries
Ling-Bao Xing et al.
JOURNAL OF POWER SOURCES (2016)
A trilayer separator with dual function for high performance lithium-sulfur batteries
Rensheng Song et al.
JOURNAL OF POWER SOURCES (2016)
Understanding the Charging Mechanism of Lithium-Sulfur Batteries Using Spatially Resolved Operando X-Ray Absorption Spectroscopy
Yelena Gorlin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Solvent Effects on Polysulfide Redox Kinetics and Ionic Conductivity in Lithium-Sulfur Batteries
Frank Y. Fan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Understanding electrochemical potentials of cathode materials in rechargeable batteries
Chaofeng Liu et al.
MATERIALS TODAY (2016)
COF-Net on CNT-Net as a Molecularly Designed, Hierarchical Porous Chemical Trap for Polysulfides in Lithium-Sulfur Batteries
JongTae Yoo et al.
NANO LETTERS (2016)
Powering Lithium-Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Zhe Yuan et al.
NANO LETTERS (2016)
Design Principles for Heteroatom-Doped Nanocarbon to Achieve Strong Anchoring of Polysulfides for Lithium-Sulfur Batteries
Ting-Zheng Hou et al.
SMALL (2016)
Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium-sulfur battery design
Xinyong Tao et al.
NATURE COMMUNICATIONS (2016)
The dual actions of modified polybenzimidazole in taming the polysulfide shuttle for long-life lithium-sulfur batteries
Gaoran Li et al.
NPG ASIA MATERIALS (2016)
Easy preparation of partially-opened carbon nanotubes by simple air oxidation for high performance Li-S batteries
Jae Ho Kim et al.
RSC ADVANCES (2016)
Rational design of a nested pore structure sulfur host for fast Li/S batteries with a long cycle life
Meiri Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Fabricating multifunctional nanoparticle membranes by a fast layer-by-layer Langmuir-Blodgett process: application in lithium-sulfur batteries
M. S. Kim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Partially unzipped carbon nanotubes for high-rate and stable lithium-sulfur batteries
Y. C. Jeong et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Ultra-small B2O3 nanocrystals grown in situ on highly porous carbon microtubes for lithium-iodine and lithium-sulfur batteries
Zhong Su et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Hierarchical multi-component nanofiber separators for lithium polysulfide capture in lithium-sulfur batteries: an experimental and molecular modeling study
Jiadeng Zhu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Light-weight functional layer on a separator as a polysulfide immobilizer to enhance cycling stability for lithium-sulfur batteries
Feng Wu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Phosphorene as a promising anchoring material for lithium-sulfur batteries: a computational study
Jingxiang Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
In situ synthesis of flexible elastic N-doped carbon foam as a carbon current collector and interlayer for high-performance lithium sulfur batteries
Zhaoxia Cao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Bifunctional separator as a polysulfide mediator for highly stable Li-S batteries
Syed Ali Abbas et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Modified separators coated with a Ca(OH)2-carbon framework derived from crab shells for lithium-sulfur batteries
Hongyuan Shao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
A few-layered Ti3C2 nanosheet/glass fiber composite separator as a lithium polysulphide reservoir for high-performance lithium-sulfur batteries
Chong Lin et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
MnO modified carbon nanotubes as a sulfur host with enhanced performance in Li/S batteries
Taihua An et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
A novel separator coated by carbon for achieving exceptional high performance lithium-sulfur batteries
Jiadeng Zhu et al.
NANO ENERGY (2016)
Dense coating of Li4Ti5O12 and graphene mixture on the separator to produce long cycle life of lithium-sulfur battery
Yan Zhao et al.
NANO ENERGY (2016)
Suppression of the polysulfide-shuttle behavior in Li-S batteries through the development of a facile functional group on the polypropylene separator
Xingwen Yu et al.
MATERIALS HORIZONS (2016)
Advanced High Energy Density Secondary Batteries with Multi-Electron Reaction Materials
Renjie Chen et al.
ADVANCED SCIENCE (2016)
Transport Properties of Polysulfide Species in Lithium-Sulfur Battery Electrolytes: Coupling of Experiment and Theory
M. Safari et al.
ACS CENTRAL SCIENCE (2016)
Metal-organic framework-based separator for lithium-sulfur batteries
Songyan Bai et al.
NATURE ENERGY (2016)
Hierarchical TiO2 spheres as highly efficient polysulfide host for lithium-sulfur batteries
Zhi-Zheng Yang et al.
SCIENTIFIC REPORTS (2016)
An Electrochemical Impedance Spectroscopy Investigation of the Overpotentials in Li-O2 Batteries
Jonathan Hojberg et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Permselective Graphene Oxide Membrane for Highly Stable and Anti-Self-Discharge Lithium-Sulfur Batteries
Jia-Qi Huang et al.
ACS NANO (2015)
Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
Yunhua Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Functional Mesoporous Carbon-Coated Separator for Long-Life, High-Energy Lithium-Sulfur Batteries
Juan Balach et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
A Lightweight TiO2/Graphene Interlayer, Applied as a Highly Effective Polysulfide Absorbent for Fast, Long-Life Lithium-Sulfur Batteries
Zhubing Xiao et al.
ADVANCED MATERIALS (2015)
Mechanism and Kinetics of Li2S Precipitation in Lithium-Sulfur Batteries
Frank Y. Fan et al.
ADVANCED MATERIALS (2015)
New insights into the oxidation of single-walled carbon nanotubes for the fabrication of transparent conductive films
Sae Jin Sung et al.
CARBON (2015)
A scalable hybrid separator for a high performance lithium-sulfur battery
Lina Wang et al.
CHEMICAL COMMUNICATIONS (2015)
Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions
Yan Jiao et al.
CHEMICAL SOCIETY REVIEWS (2015)
Long-Life, High-Efficiency Lithium-Sulfur Battery from a Nanoassembled Cathode
Jianhua Yan et al.
CHEMISTRY OF MATERIALS (2015)
Lithium sulfur batteries, a mechanistic review
M. Wild et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Mesoporous Carbon Inter layers with Tailored Pore Volume as Polysulfide Reservoir for High-Energy Lithium-Sulfur Batteries
Juan Balach et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2015)
Enhanced performance of lithium sulfur battery with self-assembly polypyrrole nanotube film as the functional interlayer
Guoqiang Ma et al.
JOURNAL OF POWER SOURCES (2015)
Novel interlayer made from Fe3C/carbon nanofiber webs for high performance lithium-sulfur batteries
Jian-Qiu Huang et al.
JOURNAL OF POWER SOURCES (2015)
A systematic approach to high and stable discharge capacity for scaling up the lithium-sulfur battery
Mohammad Rejaul Kaiser et al.
JOURNAL OF POWER SOURCES (2015)
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li-S Batteries
Hesham Al Salem et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Review-The Importance of Chemical Interactions between Sulfur Host Materials and Lithium Polysulfides for Advanced Lithium-Sulfur Batteries
Quan Pang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Critical Link between Materials Chemistry and Cell-Level Design for High Energy Density and Low Cost Lithium-Sulfur Transportation Battery
Damla Eroglu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Systematic Effect for an Ultra long Cycle Lithium-Sulfur Battery
Feng Wu et al.
NANO LETTERS (2015)
Polysulfide-Blocking Microporous Polymer Membrane Tailored for Hybrid Li-Sulfur Flow Batteries
Changyi Li et al.
NANO LETTERS (2015)
A hierarchical carbon nanotube-loaded glass-filter composite paper interlayer with outstanding electrolyte uptake properties for high-performance lithium-sulphur batteries
Cho-Long Lee et al.
NANOSCALE (2015)
A highly efficient polysulfide mediator for lithium-sulfur batteries
Xiao Liang et al.
NATURE COMMUNICATIONS (2015)
Synthesis of three-dimensionally interconnected sulfur-rich polymers for cathode materials of high-rate lithium-sulfur batteries
Hoon Kim et al.
NATURE COMMUNICATIONS (2015)
Stabilization of Insoluble Discharge Products by Facile Aniline Modification for High Performance Li-S Batteries
Jae Ho Kim et al.
ADVANCED ENERGY MATERIALS (2015)
Structural Design of Cathodes for Li-S Batteries
Michael A. Pope et al.
ADVANCED ENERGY MATERIALS (2015)
Lithium-Sulfur Cells: The Gap between the State-of-the-Art and the Requirements for High Energy Battery Cells
Markus Hagen et al.
ADVANCED ENERGY MATERIALS (2015)
Electrochemically Stable Rechargeable Lithium-Sulfur Batteries with a Microporous Carbon Nanofiber Filter for Polysulfide
Sheng-Heng Chung et al.
ADVANCED ENERGY MATERIALS (2015)
Review on Li-Sulfur Battery Systems: an Integral Perspective
Ariel Rosenman et al.
ADVANCED ENERGY MATERIALS (2015)
Electrocatalysis of Lithium Polysulfides: Current Collectors as Electrodes in Li/S Battery Configuration
Ganguli Babu et al.
SCIENTIFIC REPORTS (2015)
A free-standing carbon nanofiber interlayer for high-performance lithium-sulfur batteries
Richa Singhal et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Polysulfide rejection layer from alpha-lipoic acid for high performance lithium-sulfur battery
Jongchan Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Interaction mechanism between a functionalized protective layer and dissolved polysulfide for extended cycle life of lithium sulfur batteries
Wook Ahn et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Guangmin Zhou et al.
NANO ENERGY (2015)
Multi-functional separator/interlayer system for high-stable lithium-sulfur batteries: Progress and prospects
Jia-Qi Huang et al.
ENERGY STORAGE MATERIALS (2015)
Enhanced Cycle Performance of Lithium-Sulfur Batteries Using a Separator Modified with a PVDF-C Layer
Hang Wei et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Sulfur-Infiltrated Graphene-Based Layered Porous Carbon Cathodes for High-Performance Lithium-Sulfur Batteries
Xi Yang et al.
ACS NANO (2014)
3D Interconnected Porous Carbon Aerogels as Sulfur Immobilizers for Sulfur Impregnation for Lithium-Sulfur Batteries with High Rate Capability and Cycling Stability
Zhiwei Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Hierarchical Free-Standing Carbon-Nanotube Paper Electrodes with Ultrahigh Sulfur-Loading for Lithium-Sulfur Batteries
Zhe Yuan et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium- Sulfur Batteries
Hong-Jie Peng et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Bifunctional Separator with a Light-Weight Carbon-Coating for Dynamically and Statically Stable Lithium-Sulfur Batteries
Sheng-Heng Chung et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Liquid-Type Cathode Enabled by 3D Sponge-Like Carbon Nanotubes for High Energy Density and Long Cycling Life of Li-S Batteries
Xiong Pu et al.
ADVANCED MATERIALS (2014)
A hierarchical carbonized paper with controllable thickness as a modulable interlayer system for high performance Li-S batteries
Sheng-Heng Chung et al.
CHEMICAL COMMUNICATIONS (2014)
Rechargeable Lithium-Sulfur Batteries
Arumugam Manthiram et al.
CHEMICAL REVIEWS (2014)
Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries
Zhiyong Zhang et al.
ELECTROCHIMICA ACTA (2014)
Facile preparation of reduced graphene oxide-based gas barrier films for organic photovoltaic devices
T. Kim et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Ionic shield for polysulfides towards highly-stable lithium-sulfur batteries
Jia-Qi Huang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Improved lithium-sulfur batteries with a conductive coating on the separator to prevent the accumulation of inactive S-related species at the cathode-separator interface
Hongbin Yao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Probing the Lithium-Sulfur Redox Reactions: A Rotating-Ring Disk Electrode Study
Yi-Chun Lu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
The Use of Redox Mediators for Enhancing Utilization of Li2S Cathodes for Advanced Li-S Battery Systems
Stefano Meini et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
High-Performance Li-S Batteries with an Ultra-lightweight MWCNT-Coated Separator
Sheng-Heng Chung et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Lithium-sulfur batteries: Influence of C-rate, amount of electrolyte and sulfur loading on cycle performance
Jan Brueckner et al.
JOURNAL OF POWER SOURCES (2014)
Mechanistic modeling of polysulfide shuttle and capacity loss in lithium-sulfur batteries
Andreas F. Hofmann et al.
JOURNAL OF POWER SOURCES (2014)
Nickel foam as interlayer to improve the performance of lithium-sulfur battery
Kai Zhang et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2014)
High Electrochemical Selectivity of Edge versus Terrace Sites in Two-Dimensional Layered MoS2 Materials
Haotian Wang et al.
NANO LETTERS (2014)
Strong Sulfur Binding with Conducting Magneli-Phase TinO2n-1 Nanomaterials for Improving Lithium-Sulfur Batteries
Xinyong Tao et al.
NANO LETTERS (2014)
Surface-enhanced redox chemistry of polysulphides on a metallic and polar host for lithium-sulphur batteries
Quan Pang et al.
NATURE COMMUNICATIONS (2014)
Phosphorous Pentasulfide as a Novel Additive for High-Performance Lithium-Sulfur Batteries
Zhan Lin et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Lithium-Sulfur Batteries: Electrochemistry, Materials, and Prospects
Ya-Xia Yin et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
Fast, Reversible Lithium Storage with a Sulfur/Long-Chain-Polysulfide Redox Couple
Yu-Sheng Su et al.
CHEMISTRY-A EUROPEAN JOURNAL (2013)
Sulfur Speciation in Li-S Batteries Determined by Operando X-ray Absorption Spectroscopy
Marine Cuisinier et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)
Reduced graphene oxide film as a shuttle-inhibiting interlayer in a lithium-sulfur battery
Xuefeng Wang et al.
JOURNAL OF POWER SOURCES (2013)
Stable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
Zhi Wei Seh et al.
CHEMICAL SCIENCE (2013)
Lithium/Sulfur Cell Discharge Mechanism: An Original Approach for Intermediate Species Identification
Celine Barchasz et al.
ANALYTICAL CHEMISTRY (2012)
The Birth of the Lithium-Ion Battery
Akira Yoshino
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)
A new approach to improve cycle performance of rechargeable lithium-sulfur batteries by inserting a free-standing MWCNT interlayer
Yu-Sheng Su et al.
CHEMICAL COMMUNICATIONS (2012)
Understanding the Nature of Absorption/Adsorption in Nanoporous Polysulfide Sorbents for the Li-S Battery
Scott Evers et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Smaller Sulfur Molecules Promise Better Lithium-Sulfur Batteries
Sen Xin et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Effect of Discharge Cutoff Voltage on Reversibility of Lithium/Sulfur Batteries with LiNO3-Contained Electrolyte
Sheng S. Zhang
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanostructured materials for advanced electrochemical energy devices
Jitendra N. Tiwari et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Lithium-sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Yu-Sheng Su et al.
NATURE COMMUNICATIONS (2012)
Battery Performance and Photocatalytic Activity of Mesoporous Anatase TiO2 Nanospheres/Graphene Composites by Template-Free Self-Assembly
Na Li et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Michael Naguib et al.
ADVANCED MATERIALS (2011)
Universality in Oxygen Evolution Electrocatalysis on Oxide Surfaces
Isabela C. Man et al.
CHEMCATCHEM (2011)
High C rate Li-S cathodes: sulfur imbibed bimodal porous carbons
Guang He et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Challenges in the development of advanced Li-ion batteries: a review
Vinodkumar Etacheri et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
The Sabatier Principle Illustrated by Catalytic H2O2 Decomposition on Metal Surfaces
Anders B. Laursen et al.
JOURNAL OF CHEMICAL EDUCATION (2011)
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Liwen Ji et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
A review of conduction phenomena in Li-ion batteries
Myounggu Park et al.
JOURNAL OF POWER SOURCES (2010)
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Chengdu Liang et al.
CHEMISTRY OF MATERIALS (2009)
A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries
Xiulei Ji et al.
NATURE MATERIALS (2009)
Synthesis and Li-Ion insertion properties of highly crystalline mesoporous rutile TiO2
Donghai Wang et al.
CHEMISTRY OF MATERIALS (2008)
Preparation of brookite-type TiO2/Carbon nanocomposite electrodes for application to Li ion batteries
Du-Hee Lee et al.
EUROPEAN JOURNAL OF INORGANIC CHEMISTRY (2008)
Lithium intercalation into nanocrystalline brookite TiO2
M. Anji Reddy et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2007)
High lithium electroactivity of nanometer-sized rutile TiO2
Yong-Sheng Hu et al.
ADVANCED MATERIALS (2006)
Lithium-ion intercalation into TiO2-B nanowires
AR Armstrong et al.
ADVANCED MATERIALS (2005)
Polysulfide shuttle study in the Li/S battery system
YV Mikhaylik et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
Share Paper
