Related references
Note: Only part of the references are listed.Dislocation nucleation facilitated by atomic segregation
Lianfeng Zou et al.
NATURE MATERIALS (2018)
Feedstock powder processing research needs for additive manufacturing development
Iver E. Anderson et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2018)
Synthesis and characterization of textured Ti2AlC reinforced magnesium composite
Wenbo Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructure, mechanical properties and fracture mechanism of Ti2AlC reinforced AZ91D composites fabricated by stir casting
Wenbo Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
A deformation-processed Al-matrix/Ca-nanofilamentary composite with low density, high strength, and high conductivity
Liang Tian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Rayleigh-Taylor and Richtmyer-Meshkov instability induced flow, turbulence, and mixing. I
Ye Zhou
PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2017)
Production of fine calcium powders by centrifugal atomization with rotating quench bath
Liang Tian et al.
POWDER TECHNOLOGY (2017)
Twist Extrusion as a Potent Tool for Obtaining Advanced Engineering Materials: A Review
Yan Beygelzimer et al.
ADVANCED ENGINEERING MATERIALS (2017)
Inner Architecture of Bonded Splats under Combined High Pressure and Shear
Shahin Khoddam et al.
ADVANCED ENGINEERING MATERIALS (2016)
Hybrid metallic composite materials fabricated by sheathed powder compaction
Thaneshan Sapanathan et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Sintering and Nanostability: The Thermodynamic Perspective
Ricardo H. R. Castro et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
Recent Advancements in Liquid Metal Flexible Printed Electronics: Properties, Technologies, and Applications
Xuelin Wang et al.
MICROMACHINES (2016)
Ton-scale metal-carbon nanotube composite: The mechanism of strengthening while retaining tensile ductility
Kang Pyo So et al.
EXTREME MECHANICS LETTERS (2016)
Synthesis of Hybrid Materials by Severe Plastic Deformation: A New Paradigm of SPD Processing
Yan Beygelzimer et al.
ADVANCED ENGINEERING MATERIALS (2015)
Shear blanking test of a mechanically bonded aluminum/copper composite using experimental and numerical methods
Thaneshan Sapanathan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Defect-interface interactions
I. J. Beyerlein et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Stretchable Loudspeaker using Liquid Metal Microchannel
Sang Woo Jin et al.
SCIENTIFIC REPORTS (2015)
Toward architecturing of metal composites by twist extrusion
Marat I. Latypov et al.
MATERIALS RESEARCH LETTERS (2015)
Torsional and compressive behaviours of a hybrid material: Spiral fibre reinforced metal matrix composite
S. Khoddam et al.
MATERIALS & DESIGN (2015)
Direct Intense Pulsed Light Sintering of Inkjet-Printed Copper Oxide Layers within Six Milliseconds
Hyunkyoo Kang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Joining of bulk metallic glasses in air
Wen Chen et al.
ACTA MATERIALIA (2014)
Modeling the electrical resistivity of deformation processed metal-metal composites
Liang Tian et al.
ACTA MATERIALIA (2014)
Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces
D. Raabe et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)
Phase field study of interfacial diffusion-driven spheroidization in a composite comprised of two mutually insoluble phases
Liang Tian et al.
JOURNAL OF CHEMICAL PHYSICS (2014)
A dislocation-based, strain-gradient-plasticity strengthening model for deformation processed metal-metal composites
Liang Tian et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Review: effect of bimetal interface structure on the mechanical behavior of Cu-Nb fcc-bcc nanolayered composites
Nathan A. Mara et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Hybrid metal wire-dielectric terahertz waveguides: challenges and opportunities [Invited]
Andrey Markov et al.
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS (2014)
Strength changes and bonded interface investigations in a spiral extruded aluminum/copper composite
Thaneshan Sapanathan et al.
MATERIALS & DESIGN (2014)
Computational design of patterned interfaces using reduced order models
A. J. Vattre et al.
SCIENTIFIC REPORTS (2014)
Architecturing of Metal-Based Composites with Concurrent Nanostructuring: A New Paradigm of Materials Design
Olivier Bouaziz et al.
ADVANCED ENGINEERING MATERIALS (2013)
Morphological stability of Cu-Nb nanocomposites under high-energy collision cascades
Liang Zhang et al.
APPLIED PHYSICS LETTERS (2013)
Prospects for novel deformation processed Al/Ca composite conductors for overhead high voltage direct current (HVDC) power transmission
Liang Tian et al.
ELECTRIC POWER SYSTEMS RESEARCH (2013)
Internet of Things (IoT): A vision, architectural elements, and future directions
Jayavardhana Gubbi et al.
FUTURE GENERATION COMPUTER SYSTEMS-THE INTERNATIONAL JOURNAL OF ESCIENCE (2013)
Potential of cold gas dynamic spray as additive manufacturing technology
A. Sova et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Additive manufacturing of steel-bronze bimetal by shaped metal deposition: interface characteristics and tensile properties
Liming Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Spiral extrusion of aluminum/copper composite for future manufacturing of hybrid rods: A study of bond strength and interfacial characteristics
Thaneshan Sapanathan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Multiple pass axi-symmetrical forward spiral extrusion of interstitial-free (IF) steel
A. Farhoumand et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The microstructure-strength relationship in a deformation processed Al-Ca composite
Liang Tian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Radiation damage tolerant nanomaterials
I. J. Beyerlein et al.
MATERIALS TODAY (2013)
Cross Flow During Twist Extrusion: Theory, Experiment, and Application
Roman Kulagin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Pervasive liquid metal based direct writing electronics with roller-ball pen
Yi Zheng et al.
AIP ADVANCES (2013)
Lower boundary in metal explosive welding. Evolution of ideas
V. I. Lysak et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
The Nanostructured Origin of Deformation Twinning
Qian Yu et al.
NANO LETTERS (2012)
An investigation of hardness homogeneity throughout disks processed by high-pressure torsion
Megumi Kawasaki et al.
ACTA MATERIALIA (2011)
A generalized spherical velocity field for bi-metallic tube extrusion through dies of any shape
H. Haghighat et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2011)
The cold welding of copper to aluminum using equal channel angular extrusion (ECAE) process
M. Zebardast et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
An investigation on diffusion bonding of aluminum to copper using equal channel angular extrusion process
P. Eslami et al.
MATERIALS LETTERS (2011)
Effect of oxide particles on the stabilization and final microstructure in aluminium
Andrea Bachmaier et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Hierarchical microstructure of explosive joints: Example of titanium to steel cladding
J. Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A modification on ECAP process by incorporating torsional deformation
Behtash Mani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Upper-bound analysis of axi-symmetric forward spiral extrusion
S. Khoddam et al.
MECHANICS OF MATERIALS (2011)
Metal Matrix Composites
Andreas Mortensen et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
The Internet of Things: A survey
Luigi Atzori et al.
COMPUTER NETWORKS (2010)
Carbon nanotube reinforced metal matrix composites - a review
S. R. Bakshi et al.
INTERNATIONAL MATERIALS REVIEWS (2010)
Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials
Dierk Raabe et al.
MRS BULLETIN (2010)
Investigation of parameters affecting interface strength in Al/Cu clad bimetal rod extrusion process
A. Khosravifard et al.
MATERIALS & DESIGN (2010)
Carbon nanotube-polymer composites: Chemistry, processing, mechanical and electrical properties
Zdenko Spitalsky et al.
PROGRESS IN POLYMER SCIENCE (2010)
The stress-strain response of nanocrystalline metals: A quantized crystal plasticity approach
Lin Li et al.
ACTA MATERIALIA (2009)
Intense pulsed light sintering of copper nanoink for printed electronics
Hak-Sung Kim et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2009)
Thermodynamics of densification of powder compact
Yoshihiro Hirata et al.
CERAMICS INTERNATIONAL (2009)
Kinematics of metal flow during twist extrusion investigated with a new experimental method
Y. Beygelzimer et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
FEM and metallurgical analysis of modified 6082 aluminium alloys processed by multipass ECAP: Influence of material properties and different process settings on induced plastic strain
E. Cerri et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Improving both strength and ductility of a Mg alloy through a large number of ECAP passes
Aibin Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Microstructural and mechanical properties of commercially pure aluminum subjected to Dual Equal Channel Lateral Extrusion
B. Talebanpour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Useful properties of twist extrusion
Y. Beygelzimer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Fabrication and Characterization of Supersaturated Al-Mg Alloys by Severe Plastic Deformation and Their Mechanical Properties
Kenji Kaneko et al.
MATERIALS TRANSACTIONS (2009)
Texture evolution in equal-channel angular extrusion
Irene J. Beyerlein et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Heterogeneous and architectured materials:: A possible strategy for design of structural materials
O. Bouaziz et al.
ADVANCED ENGINEERING MATERIALS (2008)
T-shaped equi-channel angular pressing of Pb-Sn eutectic and its tensile properties
V. Srinivas Rao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Interface structure and radiation damage resistance in Cu-Nb multilayer nanocomposites
M. J. Demkowicz et al.
PHYSICAL REVIEW LETTERS (2008)
Using high-pressure torsion for metal processing: Fundamentals and applications
Alexander P. Zhilyaev et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Microstructure and mechanical properties of aluminum-fullerene composite fabricated by high pressure torsion
Tornoharu Tokunaga et al.
SCRIPTA MATERIALIA (2008)
Finite element analysis of two-turn Incremental ECAP
A. Rosochowski et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Effects of cross-channel extrusion on the micirostructures and superplasticity of a Zn-22 wt.% Al eutectoid alloy
Cheng-Yu Chou et al.
SCRIPTA MATERIALIA (2007)
The radiation damage tolerance of ultra-high strength nanolayered composites
A. Misra et al.
JOM (2007)
A new method for producing bimetallic rods
A. R. Eivani et al.
MATERIALS LETTERS (2007)
The innovation potential of bulk nanostructured materials
Ruslan Z. Valiev et al.
ADVANCED ENGINEERING MATERIALS (2007)
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
M. Dao et al.
ACTA MATERIALIA (2007)
What is behind the inverse Hall-Petch effect in nanocrystalline materials?
C. E. Carlton et al.
ACTA MATERIALIA (2007)
Mechanical properties of nanocrystalline materials
MA Meyers et al.
PROGRESS IN MATERIALS SCIENCE (2006)
On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling - Theory, experiments, and simulations
A. Ma et al.
ACTA MATERIALIA (2006)
Producing bulk ultrafine-grained materials by severe plastic deformation
RZ Valiev et al.
JOM (2006)
A dislocation density based strain gradient model
Steffen Brinckmann et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2006)
A physically based gradient plasticity theory
RKA Al-Rub et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2006)
Bi-metal rod extrusion - process and product optimization
P Kazanowski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Microstructure and microhardness of cryomilled bulk nanocrystalline Al-7.5%Mg alloy consolidated by high pressure torsion
Z Lee et al.
SCRIPTA MATERIALIA (2004)
Ultra-fine grain structures in aluminium alloys by severe deformation processing
PB Prangnell et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Consolidation of partially amorphous aluminium-alloy powders by severe plastic deformation
WJ Botta et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Annealing effects on the microstructure and texture of a multifilamentary Cu-Nb composite wire
HRZ Sandim et al.
SCRIPTA MATERIALIA (2004)
Deformation-mechanism map for nanocrystalline metals by molecular-dynamics simulation
V Yamakov et al.
NATURE MATERIALS (2004)
Theoretical analysis of bimetallic rods extrusion process in double reduction die
S Berski et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
On the homogeneity of deformation by high pressure torsion
A Vorhauer et al.
SCRIPTA MATERIALIA (2004)
Mechanical properties of green compacts. II. Effect of powder relative bulk density on the strength of compacts with different forming temperature conditions
AK Radchenko
POWDER METALLURGY AND METAL CERAMICS (2004)
CNT-reinforced ceramics and metals
William A. Curtin et al.
MATERIALS TODAY (2004)
Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics
KY Rhee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
A conventional theory of mechanism-based strain gradient plasticity
Y Huang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2004)
Ceramic/metal interface structures and their relationship to atomic- and meso-scale properties
SB Sinnott et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2003)
Designing hybrid materials
MF Ashby et al.
ACTA MATERIALIA (2003)
Deformation twinning in nanocrystalline aluminum
MW Chen et al.
SCIENCE (2003)
Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion
AP Zhilyaev et al.
ACTA MATERIALIA (2003)
Microstructure and strength of a deformation processed Al-20%Sn in situ composite
K Xu et al.
JOURNAL OF MATERIALS SCIENCE (2002)
High tensile ductility in a nanostructured metal
YM Wang et al.
NATURE (2002)
Modelling powder compaction - From a pressure-density law to continuum mechanics
J Secondi
POWDER METALLURGY (2002)
Nanostructured bulk Al90Fe5Nd5 prepared by cold consolidation of gas atomised powder using severe plastic deformation
AR Yavari et al.
SCRIPTA MATERIALIA (2002)
Finite element analysis of deformation behaviour of metals during equal channel multi-angular pressing
HS Kim
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Particle rearrangement during powder compaction
JX Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Extrusion of axi-symmetric bi-metallic tubes: some experiments using hollow billets and the application of a generalised slab method of analysis
NR Chitkara et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2001)
A reformulation of strain gradient plasticity
NA Fleck et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Rotary-die equal-channel angular pressing of an Al-7 mass% Si-0.35 mass% Mg alloy
Y Nishida et al.
SCRIPTA MATERIALIA (2001)
Determining the role of surfaces and interfaces in the powder metallurgy processing of aluminum alloy powders
IE Anderson et al.
SURFACE AND INTERFACE ANALYSIS (2001)
Microhardness and microstructural evolution in pure nickel during high-pressure torsion
AP Zhilyaev et al.
SCRIPTA MATERIALIA (2001)
Taylor-based nonlocal theory of plasticity
HJ Gao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)
Advances in the science and technology of carbon nanotubes and their composites: a review
ET Thostenson et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Development of a multi-pass facility for equal-channel angular pressing to high total strains
K Nakashima et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Plastic deformation behaviour of fine-grained materials
HS Kim et al.
ACTA MATERIALIA (2000)