Melt electrowriting below the critical translation speed to fabricate crimped elastomer scaffolds with non-linear extension behaviour Check for oPdetes mimicking that of ligaments and tendons

Ligaments and tendons are comprised of aligned, crimped collagen fibrils that provide tissue-specific mechanical properties with non-linear extension behaviour, exhibiting low stress at initial strain (toe region behaviour). To approximate this behaviour, we report fibrous scaffolds with sinusoidal patterns by melt electrowriting (MEW) below the critical translation speed (CTS) by exploitation of the natural flow behaviour of the polymer melt. More specifically, we synthesised photopolymerizable poly(L-lac tide-co-E-caprolactone-co-acryloyl carbonate) (p(LLA-co-epsilon-CL-co-AC)) and poly(epsilon-caprolactone-co-acry loyl carbonate) (p(epsilon-CL-co-AC)) by ring-opening polymerization (ROP). Single fibre (f(SIC) = 26.8 +/- 1.9 pm) tensile testing revealed a customisable toe region with Young's Moduli ranging from E = 29 +/- 17 MPa for the most crimped structures to E = 314 +/- 157 MPa for straight fibres. This toe region extended to scaffolds containing multiple fibres, while the sinusoidal pattern could be influenced by printing speed. The synthesized polymers were cytocompatible and exhibited a tensile strength of sigma = 26 +/- 7 MPa after 10(4) cycles of preloading at 10% strain while retaining the distinct toe region commonly observed in native ligaments and tendon tissue. Statement of Significance Damaged tendons and ligaments are serious and frequently occurring injuries worldwide. Recent therapies, including autologous grafts, still have severe disadvantages leading to a demand for synthetic alternatives. Materials envisioned to induce tendon and ligament regeneration should be degradable, cytocompatible and mimic the ultrastructural and mechanical properties of the native tissue. Specifically, we utilised photo-cross-linkable polymers for additive manufacturing (AM) with MEW. In this way, we were able to direct-write cytocompatible fibres of a few micrometres thickness into crimp-structured elastomer scaffolds that mimic the non-linear biomechanical behaviour of tendon and ligament tissue. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd.