Related references
Note: Only part of the references are listed.Friction stir welding of aluminium alloys: An overview of experimental findings - Process, variables, development and applications
Pratik H. Shah et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2019)
Challenges in Thermo-mechanical Analysis of Friction Stir Welding Processes
N. Dialami et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2017)
Study of a collocated Lagrange-remap scheme for multi-material flows adapted to HPC
Jean-Philippe Braeunig et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2017)
An explicit Lagrangian finite element method for free-surface weakly compressible flows
Massimiliano Cremonesi et al.
COMPUTATIONAL PARTICLE MECHANICS (2017)
Experimental and Numerical Method for Estimating Diffusion Coefficient of the Carbon Dioxide into Light Components
Nikhil Bagalkot et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Role of insert material on process loads during FSW
Saurabh Dixit et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Numerical predictions and experimental investigation of the temperature distribution of friction stir welded AA 5059 aluminium alloy joints
Narayanasamy Babu et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2017)
A fast and accurate two-stage strategy to evaluate the effect of the pin tool profile on metal flow, torque and forces in friction stir welding
N. Dialami et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Mechanical behaviour at high temperature as induced during welding of a 6xxx series aluminium alloy
D. Maisonnette et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2017)
A numerical methodology for predicting tool wear in Friction Stir Welding
A. F. Hasan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Effect of ultrasonic vibration on welding load, temperature and material flow in friction stir welding
Y. B. Zhong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
An assisted heating tool design for FSW of thermoplastics
Pragya N. Banjare et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Comparison of residual stress distributions in conventional and stationary shoulder high-strength aluminum alloy friction stir welds
Tianzhu Sun et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Modeling of friction-stir butt-welds and its application in automotive bumper impact performance Part 2. Impact modeling and bumper crash performance
Sachin Patil et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Microstructure and Residual Stresses in a Friction Stir Welded Butt Joint of as-cast ZK60 Alloy Containing Rare Earths
Erenilton Pereira da Silva et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)
Quantitative wear analysis of H13 steel tool during friction stir welding of Cu-0.8%Cr-0.1%Zr alloy
Pankaj Sahlot et al.
WEAR (2017)
A Finite Element Model to Simulate Defect Formation during Friction Stir Welding
Zhi Zhu et al.
METALS (2017)
On lap shear strength of friction stir spot welded AA6061 alloy
Ashu Garg et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Effect of Tool Geometry and Process Parameters on Mechanical Properties of Friction Stir Spot Welded Dissimilar Aluminum Alloys
Ju-Ri Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2017)
On the role of the Thermal Contact Conductance during the Friction Stir Welding of an AA5754-H111 butt joint
N. Contuzzi et al.
APPLIED THERMAL ENGINEERING (2016)
High order accurate direct Arbitrary-Lagrangian-Eulerian ADER-WENO finite volume schemes on moving curvilinear unstructured meshes
Walter Boscheri et al.
COMPUTERS & FLUIDS (2016)
Arbitrary Lagrangian-Eulerian methods for modeling high-speed compressible multimaterial flows
Andrew J. Barlow et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2016)
Monitoring of the friction stir welding process by means of thermography
L. M. Serio et al.
NONDESTRUCTIVE TESTING AND EVALUATION (2016)
Impact of Friction Stir Welding (FSW) Process Parameters on Thermal Modeling and Heat Generation of Aluminum Alloy Joints
Saad B. Aziz et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2016)
Effect of Friction Stir Process Parameters on the Mechanical and Thermal Behavior of 5754-H111 Aluminum Plates
Livia Maria Serio et al.
MATERIALS (2016)
Experimental Analysis of Friction Stir Welding of Dissimilar Alloys AA6061 and Mg AZ31 Using Circular Butt Joint Geometry
Heena K. Sharma et al.
3RD INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING 2016, ICIAME 2016 (2016)
Ultimate tensile strength optimization of different FSW aluminium alloy joints
Ana C. F. Silva et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Material flow visualization in Friction Stir Welding via particle tracing
N. Dialami et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)
Effect of Heat Input on AA5052 Friction Stir Welds Characteristics
Leonardo N. Tufaro et al.
INTERNATIONAL CONGRESS OF SCIENCE AND TECHNOLOGY OF METALLURGY AND MATERIALS, SAM - CONAMET 2013 (2015)
Computational Modeling and Sub-Grid Scale Stabilization of Incompressibility and Convection in the Numerical Simulation of Friction Stir Welding Processes
C. Agelet de Saracibar et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2014)
A review of numerical analysis of friction stir welding
Xiaocong He et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Comparison of a Fluid and a Solid Approach for the Numerical Simulation of Friction Stir Welding with a Non-Cylindrical Pin
Philippe Bussetta et al.
STEEL RESEARCH INTERNATIONAL (2014)
Numerical modeling of friction stir welding processes
M. Chiumenti et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2013)
An apropos kinematic framework for the numerical modeling of friction stir welding
Narges Dialami et al.
COMPUTERS & STRUCTURES (2013)
Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes
Fadi Al-Badour et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
The effect of hardening laws and thermal softening on modeling residual stresses in FSW of aluminum. alloy 2024-T3
M. R. Sonne et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Flexible control of the microstructure and mechanical properties of friction stir welded Ti-6Al-4V joints
K. Kitamura et al.
MATERIALS & DESIGN (2013)
HEAT GENERATION DURING PLUNGE STAGE IN FRICTION STIR WELDING
Darko M. Veljic et al.
THERMAL SCIENCE (2013)
Recent development in finite element analysis of self-piercing riveted joints
Xiaocong He et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Finite Element Analysis of Laser Welding: A State of Art Review
Xiaocong He
MATERIALS AND MANUFACTURING PROCESSES (2012)
Microstructures of dissimilar friction stir welded joints between 2024-T4 aluminum alloy and Al/Mg2Si metal matrix cast composite
M. Sharifitabar et al.
COMPOSITES PART B-ENGINEERING (2011)
Numerical procedure for residual stresses prediction in friction stir welding
G. Buffa et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2011)
A review of finite element analysis of adhesively bonded joints
Xiaocong He
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2011)
Analysis of transient temperature and residual thermal stresses in friction stir welding of aluminum alloy 6061-T6 via numerical simulation
Mohammad Riahi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Friction stir welded structural materials: beyond Al-alloys
G. Çam
INTERNATIONAL MATERIALS REVIEWS (2011)
Microstructure and mechanical properties of friction stir welded particulate reinforced AA2124/SiC/25p-T4 composite
Yahya Bozkurt et al.
JOURNAL OF COMPOSITE MATERIALS (2011)
Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy
X. Cao et al.
MATERIALS & DESIGN (2011)
Assessment of the failure load for an AA6061-T6 friction stir spot welding joint
N-T Nguyen et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2011)
Mechanical and microstructural properties prediction by artificial neural networks in FSW processes of dual phase titanium alloys
Gianluca Buffa et al.
Journal of Manufacturing Processes (2011)
Numerical simulation of friction stir butt welding process for AA5083-H18 sheets
Dongun Kim et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2010)
Recent development in finite element analysis of clinched joints
Xiaocong He
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Friction model for friction stir welding process simulation: Calibrations from welding experiments
Mohamed Assidi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
A newly developed tool without probe for friction stir spot welding and its performance
Y. Tozaki et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Tensile properties of a friction stir welded magnesium alloy: Effect of pin tool thread orientation and weld pitch
S. M. Chowdhury et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Friction stir welding of aluminium alloys
P L Threadgill et al.
INTERNATIONAL MATERIALS REVIEWS (2009)
A 3D numerical simulation of different phases of friction stir welding
S. Guerdoux et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2009)
ACCURATE 3D FRICTION STIR WELDING SIMULATION TOOL BASED ON FRICTION MODEL CALIBRATION
Mohamed Assidi et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
A thermal model of friction stir welding in aluminum alloys
C. Hamilton et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Self-pierce riveting for sheet materials: State of the art
Xiaocong He et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Comparison of two contact models in the simulation of friction stir welding process
Z. Zhang
JOURNAL OF MATERIALS SCIENCE (2008)
Recent advances in friction-stir welding - Process, weldment structure and properties
R. Nandan et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Thermal modelling of friction stir welding
H. B. Schmidt et al.
SCRIPTA MATERIALIA (2008)
Three-dimensional heat and material flow during friction stir welding of mild steel
R. Nandan et al.
ACTA MATERIALIA (2007)
Finite element modelling and control of new metal forming processes
J. -L. Chenot et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel
R. Nandan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2006)
Predicting residual thermal stresses in friction stir welded metals
Mir Zahedul H. Khandkar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Steady state thermomechanical modelling of friction stir welding
A. Bastier et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2006)
Design of the friction stir welding tool using the continuum based FEM model
G Buffa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
A continuum based FEM model for friction stir welding - model development
G Buffa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Effect of boundary conditions and heat source distribution on temperature distribution in friction stir welding
A Simar et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2006)
Mechanical and thermal modelling of friction stir welding
P Heurtier et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Modeling strain hardening and texture evolution in friction stir welding of stainless steel
JH Cho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
A local model for the thermomechanical conditions in friction stir welding
H Schmidt et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2005)
Thermomechanical modelling and force analysis of friction stir welding by the finite element method
C Chen et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2004)
Finite element modeling of friction stir welding - thermal and thermomechanical analysis
CM Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds
M Peel et al.
ACTA MATERIALIA (2003)
Joint properties of friction stir welded AZ31B-H24 magnesium alloy
WB Lee et al.
MATERIALS SCIENCE AND TECHNOLOGY (2003)
Prediction of temperature distribution and thermal history during friction stir welding: input torque based model
MZH Khandkar et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2003)
Microstructural investigation friction stir welded 7050-T651 aluminium
JQ Su et al.
ACTA MATERIALIA (2003)
Heat transfer in friction stir welding - Experimental and numerical studies
YJ Chao et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2003)
Numerical and experimental study of the heat transfer process in friction stir welding
M Song et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2003)
Three-dimensional modeling of the friction stir-welding process
P Ulysse
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Flow patterns during friction stir welding
A Guerra et al.
MATERIALS CHARACTERIZATION (2002)
Coupled thermomechanical analysis of friction stir welding process using simplified models
P Dong et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2001)