Related references
Note: Only part of the references are listed.Freeze-thaw method for oil recovery from waste cutting fluid without chemical additions
Wanli Feng et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Treatment of industrial wastewater contaminated with recalcitrant metal working fluids by the photo-Fenton process as post-treatment for DAF
Mohammad Mehdi Amin et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2017)
Operating cost and treatment of metalworking fluid wastewater by chemical coagulation and electrocoagulation processes
E. Demirbas et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2017)
Field and laboratory performance of a cold-region sand stabilized with geofiber and synthetic fluid
Kenan Hazirbaba
COLD REGIONS SCIENCE AND TECHNOLOGY (2017)
Influence of metalworking fluid additives on the thermal conditions in grinding
Daniel Meyer et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites
Roland Bejjani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Effects of processing parameters on relative density, microhardness and microstructure of recycled Ti-6Al-4V from machining chips produced by equal channel angular pressing
Q. Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: A review
M. S. Najiha et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Recycling disaster waste: Feasibility, method and effectiveness
Charlotte Brown et al.
RESOURCES CONSERVATION AND RECYCLING (2016)
Effect of new blade of centrifugal separator on particle separation performance
Tetsuya Yamamoto et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2016)
Bioinspired Design and Fabrication of Green-Environmental Dry Adhesive with Robust Wide-Tip Shape
Seong Min Kang
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Environmental Impact Assessment of Composite Small Craft Manufacturing Using the Generic Work Breakdown Structure
Seunghoon Nam et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Trends and Research Challenges in Remanufacturing
Mitsutaka Matsumoto et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Solid-state recycling of light metals: A review
Shazarel Shamsudin et al.
ADVANCES IN MECHANICAL ENGINEERING (2016)
Investigation of the solid lubrication effect of commercial boron-based compounds in end milling
Koray Kilicay et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Optimal product design for life cycle assessment (LCA) with the case study of universal motors
Jungmok Ma et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Nano-Lubrication: A Review
Hyun-Joon Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Future perspectives of sustainable manufacturing and applications based on research databases
Hae-Sung Yoon et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Evolutionary in Solid State Recycling Techniques of Aluminium: A review
Shazarel Shamsudin et al.
13TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - DECOUPLING GROWTH FROM RESOURCE USE (2016)
Metalworking fluids-Mechanisms and performance
E. Brinksmeier et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
Comparative study of microbiological monitoring of water-miscible metalworking fluids
T. Koch et al.
INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2015)
A novel surface quality evaluation method in ultra-precision raster milling using cutting chips
Guoqing Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Cold extrusion of hot extruded aluminum chips
Matthias Haase et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Performance Evaluation of Chemically Modified Crude Jatropha Oil as a Bio-based Metalworking Fluids for Machining Process
N. Talib et al.
12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - EMERGING POTENTIALS (2015)
A Sustainable Direct Recycling of Aluminum Chip (AA6061) in Hot Press Forging Employing Response Surface Methodology
S. S. Khamis et al.
12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - EMERGING POTENTIALS (2015)
A Review on Recycling Aluminum Chips by Hot Extrusion Process
S. N. Ab Rahim et al.
12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - EMERGING POTENTIALS (2015)
Chemical mechanical planarization of silicon wafers at natural pH for green manufacturing
Yong-Guang Wang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Analytic Approaches for Keeping High Braking Efficiency and Clamping Efficiency of Electro Wedge Brakes
Dong-Hwan Shin et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Tool Wear Analysis on Coated and Uncoated Carbide Tools in Inconel Machining
Kyung-Hee Park et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Urban Eco-Greenergy™ Hybrid Wind-Solar Photovoltaic Energy System and Its Applications
Wen Tong Chong et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
A diagnosis and evaluation method for strategic planning and systematic design of a virtual factory in smart manufacturing systems
SangSu Choi et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Integrated analysis method of thin-walled turbine blade precise machining
Hui Wang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Comparison of ceramic and polymeric ultrafiltration membranes for treating wastewater from metalworking industry
Arnela Muric et al.
CHEMICAL ENGINEERING JOURNAL (2014)
Environmental friendly cutting fluids and cooling techniques in machining: a review
Sujan Debnath et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Multicomponent materials from machining chips compacted by equal-channel angular pressing
Rimma Lapovok et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Study on magnetic separation for decontamination of cesium contaminated soil by using superconducting magnet
Susumu Igarashi et al.
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2014)
Experimental investigation on application of emulsifier oil based nano cutting fluids in metal cutting process
M. Amrita et al.
12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014) (2014)
Ecological and economic evaluation of a novel glycerol based biocide-free metalworking fluid
Hubertus Wichmann et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Treatment of waste metalworking fluid by a hybrid ozone-biological process
Sheeja Jagadevan et al.
JOURNAL OF HAZARDOUS MATERIALS (2013)
Ultrafine-grained pure Ti recycled by equal channel angular pressing with high strength and good ductility
P. Luo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Effect of die design on the welding quality during solid state recycling of AA6060 chips by hot extrusion
V. Gueley et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Application of vegetable oil-based metalworking fluids in machining ferrous metals-A review
S. A. Lawal et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Microstructure evolution of hot pressed AZ91D alloy chips reheated to semi-solid state
Xu Hong-yu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Solid-state recycling of aluminium alloy swarf through cold profile extrusion and cold rolling
Ryoichi Chiba et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Development of high gradient magnetic separation system under dry condition
Y. Nakai et al.
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2010)
Effect of extrusion ratio on microstructure and mechanical properties of AZ91D magnesium alloy recycled from scraps by hot extrusion
Hu Mao-liang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Recycling of minute metal scraps by semisolid processing: Manufacturing of design materials
S. Sugiyama et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Recycling of automotive aluminum
Jirang Cui et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Membrane-based techniques for the separation and purification of proteins: An overview
Arunima Saxena et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2009)
Modeling fluid behavior and droplet interactions during liquid-liquid separation in hydrocyclones
Steffen Schuetz et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Hot profile extrusion of AA-6060 aluminum chips
A. E. Tekkaya et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Effect of inner structure of centrifugal separator on particle classification performance
Tetsuya Yamamoto et al.
POWDER TECHNOLOGY (2009)
The energy benefit of stainless steel recycling
Jeremiah Johnson et al.
ENERGY POLICY (2008)
Effect of chip size on mechanical property and microstructure of AZ91D magnesium alloy prepared by solid state recycling
Maoliang Hu et al.
MATERIALS CHARACTERIZATION (2008)
Recycling of steel from grinding scraps: Reclamation plant design and cost analysis
Barbara Ruffino et al.
RESOURCES CONSERVATION AND RECYCLING (2008)
The effect of additives on the treatment of oil-in-water emulsions by vacuum evaporation
Gemma Gutierrez et al.
JOURNAL OF HAZARDOUS MATERIALS (2007)
Recycling oil and steel from grinding swarf
James I. Chang et al.
RESOURCES CONSERVATION AND RECYCLING (2006)
Enhanced biological treatment of spent metalworking fluids by prior removal of a polymer
Helen E. Connolly et al.
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2006)
Centrifugal separation efficiency in the treatment of waste emulsified oils
A Cambiella et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2006)
A review of cutting fluid application in the grinding process
RA Irani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Comparing recovering efficiency of immunomagnetic separation and centrifugation of mycobacteria in metalworking fluids
SC Chang et al.
JOURNAL OF INDUSTRIAL MICROBIOLOGY & BIOTECHNOLOGY (2005)
Use of activated carbon to polish effluent from metalworking treatment plant: comparison of different streams
N Hilal et al.
DESALINATION (2005)
Impact of environmental contaminants on machining properties of metalworking fluids
M Greeley et al.
TRIBOLOGY INTERNATIONAL (2004)
The use of ultrafiltration and nanofiltration membranes in the treatment of metal-working fluids
N Hilal et al.
DESALINATION (2004)
Characterization of casting iron powder from recycled swarf
CE da Costa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Optimisation of washing cycle on ultrafiltration membranes used in treatment of metalworking fluids
G Busca et al.
DESALINATION (2003)
Design and construction of a modular pilot plant for the treatment of oil-containing wastewaters
JM Benito et al.
DESALINATION (2002)
Enhanced oxidative stress in the skin of vitamin E deficient mice exposed to semisynthetic metal working fluids
AA Shvedova et al.
TOXICOLOGY (2002)
Magnetic separation using superconducting magnets
T Ohara et al.
PHYSICA C (2001)
Ecological aspects of the cutting fluids and its influence on quantifiable parameters of the cutting processes
M Sokovic et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
New methods of aluminium and aluminium-alloy chips recycling
J Gronostajski et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
Precision forging of aluminum and steel
H Yoshimura et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
Share Paper
