Related references
Note: Only part of the references are listed.Porous Organic Materials: Strategic Design and Structure-Function Correlation
Saikat Das et al.
CHEMICAL REVIEWS (2017)
Facile Preparation of the Porous PDMS Oil-Absorbent for Oil/Water Separation
Cunlong Yu et al.
ADVANCED MATERIALS INTERFACES (2017)
Elastomers obtained by crosslinking of α,ω-bis(glycidylether) poly(dimethylsiloxane) as versatile platforms for functional materials
Jimena S. Gonzalez et al.
EUROPEAN POLYMER JOURNAL (2017)
Organic sponge photocatalysis
Xingrong Li et al.
GREEN CHEMISTRY (2017)
Moldable clay-like unit for synthesis of highly elastic polydimethylsiloxane sponge with nanofiller modification
Shi Qiu et al.
RSC ADVANCES (2017)
被撤回的出版物: Potential applications of functional porous organic polymer materials (Retracted article. See vol. 5, pg. 18896, 2017)
Weijie Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Three-dimensional photocatalysts with a network structure
Wenjun Jiang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Carbon dioxide capture in amorphous porous organic polymers
Wenjing Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Liquid metal sponges for mechanically durable, all-soft, electrical conductors
Suqing Liang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Liquid metal droplets with high elasticity, mobility and mechanical robustness
Yuzhen Chen et al.
MATERIALS HORIZONS (2017)
Hydrophilic Sponges for Leaf-Inspired Continuous Pumping of Liquids
Tingjiao Zhou et al.
ADVANCED SCIENCE (2017)
Silicone composite foams for adsorption heat pump applications
L. Calabrese et al.
SUSTAINABLE MATERIALS AND TECHNOLOGIES (2017)
An All-Stretchable-Component Sodium-Ion Full Battery
Hongsen Li et al.
ADVANCED MATERIALS (2017)
Hypercrosslinked porous polymer materials: design, synthesis, and applications
Liangxiao Tan et al.
CHEMICAL SOCIETY REVIEWS (2017)
Three-Dimensional Continuous Conductive Nanostructure for Highly Sensitive and Stretchable Strain Sensor
Donghwi Cho et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Novel Electrically Conductive Porous PDMS/Carbon Nanofiber Composites for Deformable Strain Sensors and Conductors
Shuying Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Bioinspired, Mechano-Regulated Interfaces for Rationally Designed, Dynamically Controlled Collection of Oil Spills from Water
Yaoyao Li et al.
GLOBAL CHALLENGES (2017)
Macroporous materials: microfluidic fabrication, functionalization and applications
Bingjie Wang et al.
CHEMICAL SOCIETY REVIEWS (2017)
Hierarchically porous materials: synthesis strategies and structure design
Xiao-Yu Yang et al.
CHEMICAL SOCIETY REVIEWS (2017)
Enhancing Performance of Triboelectric Nanogenerator by Filling High Dielectric Nanoparticles into Sponge PDMS Film
Jie Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Liquid-Metal Microdroplets Formed Dynamically with Electrical Control of Size and Rate
Shi-Yang Tang et al.
ADVANCED MATERIALS (2016)
Mechanically Durable and Highly Stretchable Transistors Employing Carbon Nanotube Semiconductor and Electrodes
Alex Chortos et al.
ADVANCED MATERIALS (2016)
Preparation, characterization, and silanization of 3D microporous PDMS structure with properly sized pores for endothelial cell culture
Reyhaneh Zargar et al.
BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY (2016)
Fabrication of Highly Stretchable Conductors Based on 3D Printed Porous Poly(dimethylsiloxane) and Conductive Carbon Nanotubes/Graphene Network
Shasha Duan et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Large Area One-Step Facile Processing of Microstructured Elastomeric Dielectric Film for High Sensitivity and Durable Sensing over Wide Pressure Range
Sujie Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
3D Porous Sponge-Inspired Electrode for Stretchable Lithium-Ion Batteries
Wei Liu et al.
ADVANCED MATERIALS (2016)
A review of digital microfluidics as portable platforms for lab-on a-chip applications
Ehsan Samiei et al.
LAB ON A CHIP (2016)
Generation of Silicone Poly-HIPEs with Controlled Pore Sizes via Reactive Emulsion Stabilization
Anais Giustiniani et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2016)
Flexible and transparent triboelectric nanogenerator based on high performance well-ordered porous PDMS dielectric film
Xianming He et al.
NANO RESEARCH (2016)
Pursuing prosthetic electronic skin
Alex Chortos et al.
NATURE MATERIALS (2016)
A transparent bending-insensitive pressure sensor
Sungwon Lee et al.
NATURE NANOTECHNOLOGY (2016)
Synthesis of hydrogel polyHIPEs from functionalized glycidyl methacrylate
David Pahovnik et al.
POLYMER CHEMISTRY (2016)
Three-dimensional bioprinting of thick vascularized tissues
David B. Kolesky et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
A Flexible and Highly Sensitive Pressure Sensor Based on a PDMS Foam Coated with Graphene Nanoplatelets
Andrea Rinaldi et al.
SENSORS (2016)
Tailoring of the porous structure of soft emulsion-templated polymer materials
Artem Kovalenko et al.
SOFT MATTER (2016)
Boosted output performance of triboelectric nanogenerator via electric double layer effect
Jinsung Chun et al.
NATURE COMMUNICATIONS (2016)
Spent Coffee Bioelastomeric Composite Foams for the Removal of Pb2+ and Hg2+ from Water
Asmita A. Chavan et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Composites of metal-organic frameworks and carbon-based materials: preparations, functionalities and applications
Xiao-Wei Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Three-dimensional carbon-based architectures for oil remediation: from synthesis and modification to functionalization
Wenchao Wan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
A robust and refillable magnetic sponge capsule for remotely triggered drug release
Jingru Shi et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Self-propelled liquid metal motors steered by a magnetic or electrical field for drug delivery
Jie Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Hybrid energy harvester with simultaneous triboelectric and electromagnetic generation from an embedded floating oscillator in a single package
Myeong-Lok Seol et al.
NANO ENERGY (2016)
High-performance flexible piezoelectric nanogenerators consisting of porous cellulose nanofibril (CNF)/poly(dimethylsiloxane) (PDMS) aerogel films
Qifeng Zheng et al.
NANO ENERGY (2016)
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Thomas J. Hinton et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Highly Sensitive Pressure Sensor Based on Bioinspired Porous Structure for Real-Time Tactile Sensing
Subin Kang et al.
ADVANCED ELECTRONIC MATERIALS (2016)
A Triboelectric Sponge Fabricated from a Cube Sugar Template by 3D Soft Lithography for Superhydrophobicity and Elasticity
Daewon Kim et al.
ADVANCED ELECTRONIC MATERIALS (2016)
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Thomas J. Hinton et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Mesoporous materials for energy conversion and storage devices
Wei Li et al.
NATURE REVIEWS MATERIALS (2016)
3D Stretchable, Compressible, and Highly Conductive Metal-Coated Polydimethylsiloxane Sponges
Suqing Liang et al.
ADVANCED MATERIALS TECHNOLOGIES (2016)
Compact and Thermosensitive Nature-inspired Micropump
Hyejeong Kim et al.
SCIENTIFIC REPORTS (2016)
Polydopamine-based synthesis of an In(OH)3-PDMS sponge for ammonia detection by switching surface wettability
Jikui Wang et al.
RSC ADVANCES (2016)
Inflatable Elastomeric Macroporous Polymers Synthesized from Medium Internal Phase Emulsion Templates
Michael Tebboth et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Highly Transparent and Flexible Triboelectric Nanogenerators with Subwavelength-Architectured Polydimethylsiloxane by a Nanoporous Anodic Aluminum Oxide Template
Bhaskar Dudem et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Elastomeric Nanocomposite Foams for the Removal of Heavy Metal Ions from Water
Asmita A. Chavan et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Superhydrophobic Pump: Continuous and Spontaneous Antigravity Water Delivery
Moyuan Cao et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Liquid-Phase Metal Inclusions for a Conductive Polymer Composite
Andrew Fassler et al.
ADVANCED MATERIALS (2015)
Silica-based nanocapsules: synthesis, structure control and biomedical applications
Yu Zhang et al.
CHEMICAL SOCIETY REVIEWS (2015)
Sustainable carbon materials
Maria-Magdalena Titirici et al.
CHEMICAL SOCIETY REVIEWS (2015)
Synthesis of new zeolite structures
Jiyang Li et al.
CHEMICAL SOCIETY REVIEWS (2015)
Design and fabrication of mesoporous heterogeneous basic catalysts
Lin-Bing Sun et al.
CHEMICAL SOCIETY REVIEWS (2015)
Mesoporous pores impregnated with Au nanoparticles as effective dielectrics for enhancing triboelectric nanogenerator performance in harsh environments
Jinsung Chun et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Mussel-inspired one-step modification of a porous structured surface with self-cleaning properties for oil sorption
Pengxiang Si et al.
NEW JOURNAL OF CHEMISTRY (2015)
Preparation and morphology control of three-dimensional interconnected microporous PDMS for oil sorption
Pengxiang Si et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2015)
Rigid and microporous polymers for gas separation membranes
Seungju Kim et al.
PROGRESS IN POLYMER SCIENCE (2015)
Function-led design of new porous materials
Anna G. Slater et al.
SCIENCE (2015)
Structural optimization of 3D-printed synthetic spider webs for high strength
Zhao Qin et al.
NATURE COMMUNICATIONS (2015)
Wearable energy-dense and power-dense supercapacitor yarns enabled by scalable graphene-metallic textile composite electrodes
Libin Liu et al.
NATURE COMMUNICATIONS (2015)
From 2D to 3D: novel nanostructured scaffolds to investigate signalling in reconstructed neuronal networks
Susanna Bosi et al.
SCIENTIFIC REPORTS (2015)
UV-responsive nano-sponge for oil absorption and desorption
Do Hyun Kim et al.
SCIENTIFIC REPORTS (2015)
Three dimensional architectures: design, assembly and application in electrochemical capacitors
Minghao Yu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Bio-inspired humidity responsive switch for directional water droplet delivery
Xiaoyan Ma et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Integrating Ultra-Thermal-Sensitive Fluids into Elastomers for Multifunctional Flexible Sensors
Hanyu Jia et al.
ADVANCED ELECTRONIC MATERIALS (2015)
Piezoelectric Nanoparticle-Polymer Composite Foams
William R. McCall et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Highly Stretchable Conductors Integrated with a Conductive Carbon Nanotube/Graphene Network and 3D Porous Poly(dimethylsiloxane)
Mengting Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Highly Stretchable Polymer Transistors Consisting Entirely of Stretchable Device Components
Minkwan Shin et al.
ADVANCED MATERIALS (2014)
Reverse-Micelle-Induced Porous Pressure-Sensitive Rubber for Wearable Human-Machine Interfaces
Sungmook Jung et al.
ADVANCED MATERIALS (2014)
Hydrophobic Sponge Structure-Based Triboelectric Nanogenerator
Keun Young Lee et al.
ADVANCED MATERIALS (2014)
Highly Stretchable Resistive Pressure Sensors Using a Conductive Elastomeric Composite on a Micropyramid Array
Chwee-Lin Choong et al.
ADVANCED MATERIALS (2014)
3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
David B. Kolesky et al.
ADVANCED MATERIALS (2014)
Permeability of subcutaneous tissues surrounding long-term implants to oxygen
Lucas S. Kumosa et al.
BIOMATERIALS (2014)
Functional materials derived from open framework templates/precursors: synthesis and applications
Jian-Ke Sun et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Greener method to prepare porous polymer membranes by combining thermally induced phase separation and crosslinking of poly (vinyl alcohol) in water
O. M'barki et al.
JOURNAL OF MEMBRANE SCIENCE (2014)
The present and future role of microfluidics in biomedical research
Eric K. Sackmann et al.
NATURE (2014)
Silicone containing copolymers: Synthesis, properties and applications
Emel Yilgor et al.
PROGRESS IN POLYMER SCIENCE (2014)
PolyHIPEs: Recent advances in emulsion-templated porous polymers
Michael S. Silverstein
PROGRESS IN POLYMER SCIENCE (2014)
Solar Synthesis: Prospects in Visible Light Photocatalysis
Danielle M. Schultz et al.
SCIENCE (2014)
A Novel Soft Metal-Polymer Composite for Multidirectional Pressure Energy Harvesting
Majid Taghavi et al.
ADVANCED ENERGY MATERIALS (2014)
Durable superhydrophobic/superoleophilic PDMS sponges and their applications in selective oil absorption and in plugging oil leakages
Xia Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Solidification Behavior of Polymer Solution during Membrane Preparation by Thermally Induced Phase Separation
Toru Ishigami et al.
MEMBRANES (2014)
Preparation of Microporous Silicone Rubber Membrane with Tunable Pore Size via Solvent Evaporation-Induced Phase Separation
Jian Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Poly(dimethylsiloxane) Oil Absorbent with a Three-Dimensionally Interconnected Porous Structure and Swellable Skeleton
Aijuan Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Flexible, compressible, hydrophobic, floatable, and conductive carbon nanotube-polymer sponge
Jin-Woo Han et al.
APPLIED PHYSICS LETTERS (2013)
Macroporous Three-Dimensional PDMS Scaffolds for Extrahepatic Islet Transplantation
Eileen Pedraza et al.
CELL TRANSPLANTATION (2013)
Covalent organic frameworks (COFs): from design to applications
San-Yuan Ding et al.
CHEMICAL SOCIETY REVIEWS (2013)
Graphene and its derivatives for the development of solar cells, photoelectrochemical, and photocatalytic applications
Da Chen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Formation of polyamide 12 membranes via thermal-nonsolvent induced phase separation
Hsu-Hsien Chang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Paper-based microfluidic point-of-care diagnostic devices
Ali Kemal Yetisen et al.
LAB ON A CHIP (2013)
The past, present and potential for microfluidic reactor technology in chemical synthesis
Katherine S. Elvira et al.
NATURE CHEMISTRY (2013)
Ultrathin, highly flexible and stretchable PLEDs
Matthew S. White et al.
NATURE PHOTONICS (2013)
Lung epithelial branching program antagonizes alveolar differentiation
Daniel R. Chang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2013)
Porous covalent-organic materials: synthesis, clean energy application and design
Zhonghua Xiang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Design and Preparation of Porous Polymers
Dingcai Wu et al.
CHEMICAL REVIEWS (2012)
Anhydrous formation of foamed silicone elastomers using the Piers-Rubinsztajn reaction
John B. Grande et al.
POLYMER (2012)
Preventing hypoxia-induced cell death in beta cells and islets via hydrolytically activated, oxygen-generating biomaterials
Eileen Pedraza et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)
Gas Foaming Fabrication of Porous Biphasic Calcium Phosphate for Bone Regeneration
Hyun Jung Kim et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2012)
Solderable and electroplatable flexible electronic circuit on a porous stretchable elastomer
Gi Seok Jeong et al.
NATURE COMMUNICATIONS (2012)
Three-dimensional nanonetworks for giant stretchability in dielectrics and conductors
Junyong Park et al.
NATURE COMMUNICATIONS (2012)
A Stretchable Polymer-Carbon Nanotube Composite Electrode for Flexible Lithium-Ion Batteries: Porosity Engineering by Controlled Phase Separation
Hojun Lee et al.
ADVANCED ENERGY MATERIALS (2012)
Smart surfaces with switchable superoleophilicity and superoleophobicity in aqueous media: toward controllable oil/water separation
Lianbin Zhang et al.
NPG ASIA MATERIALS (2012)
Homogeneous and heterogeneous catalysts for multicomponent reactions
Maria Jose Climent et al.
RSC ADVANCES (2012)
A Polydimethylsiloxane (PDMS) Sponge for the Selective Absorption of Oil from Water
Sung-Jin Choi et al.
ACS APPLIED MATERIALS & INTERFACES (2011)
A portable pressure pump for microfluidic lab-on-a-chip systems using a porous polydimethylsiloxane (PDMS) sponge
Kyoung Je Cha et al.
BIOMEDICAL MICRODEVICES (2011)
Preparation of Flexible, Self-Extinguishing Silicone Foams
Jerzy J. Chrusciel et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Three-dimensional interconnected microporous poly(dimethylsiloxane) microfluidic devices
Po Ki Yuen et al.
LAB ON A CHIP (2011)
Flexible microfluidic devices with three-dimensional interconnected microporous walls for gas and liquid applications
Po Ki Yuen et al.
LAB ON A CHIP (2011)
Porous Organic Polymers in Catalysis: Opportunities and Challenges
Parminder Kaur et al.
ACS CATALYSIS (2011)
Functional Materials: From Hard to Soft Porous Frameworks
Arne Thomas
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)
Recent developments in PDMS surface modification for microfluidic devices
Jinwen Zhou et al.
ELECTROPHORESIS (2010)
Hydrophilic PDMS microchannels for high-throughput formation of oil-in-water microdroplets and water-in-oil-in-water double emulsions
Wolfgang-Andreas C. Bauer et al.
LAB ON A CHIP (2010)
Materials and Mechanics for Stretchable Electronics
John A. Rogers et al.
SCIENCE (2010)
Fabrication of high-Q polydimethylsiloxane optical microspheres for thermal sensing
C. -H. Dong et al.
APPLIED PHYSICS LETTERS (2009)
Process and material properties of polydimethylsiloxane (PDMS) for Optical MEMS
Florian Schneider et al.
SENSORS AND ACTUATORS A-PHYSICAL (2009)
Constructing the phase diagram of an aqueous solution of poly(N-isopropyl acrylamide) by controlled microevaporation in a nanoliter microchamber
Xuechang Zhou et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2008)
Preparation of microcellular polysiloxane monoliths
Marie-Therese Grosse et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2008)
Preparation of a unique microporous structure via two step phase separation in the course of drying a ternary polymer solution
Jae-Kyung Kim et al.
LANGMUIR (2007)
Nanoliter dispensing method by degassed poly(dimethylsiloxane) microchannels and its application in protein crystallization
Xuechang Zhou et al.
ANALYTICAL CHEMISTRY (2007)
The stability of radio-frequency plasma-treated polydimethylsiloxane surfaces
I-Jane Chen et al.
LANGMUIR (2007)
Effect of vapor-induced phase separation on the morphology and separation performance of polysulfone hollow fiber membranes
H. A. Tsai et al.
DESALINATION (2006)
Porous fiber formation in polymer-solvent system undergoing solvent evaporation
Pratyush Dayal et al.
JOURNAL OF APPLIED PHYSICS (2006)
Open porous polymer foams via inverse emulsion polymerization: Should the definition of high internal phase (ratio) emulsions be extended?
A Menner et al.
MACROMOLECULES (2006)
Characterization of polydimethylsiloxane (PDMS) properties for biomedical micro/nanosystems
A Mata et al.
BIOMEDICAL MICRODEVICES (2005)
The autofluorescence of plastic materials and chips measured under laser irradiation
A Piruska et al.
LAB ON A CHIP (2005)
Tailoring the surface properties of poly(dimethylsiloxane) microfluidic devices
SW Hu et al.
LANGMUIR (2004)
Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices
JN Lee et al.
ANALYTICAL CHEMISTRY (2003)
Interactions of 3T3 fibroblasts and endothelial cells with defined pore features
AK Salem et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Hemocompatibility, biocompatibility, inflammatory and in vivo studies of primary reference materials low-density polyethylene and polydimethylsiloxane:: A review
MC Bélanger et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2001)
From micro- to nanofabrication with soft materials
SR Quake et al.
SCIENCE (2000)