Related references
Note: Only part of the references are listed.Antagonist wear of monolithic zirconia crowns after 2 years
Ulrich Lohbauer et al.
CLINICAL ORAL INVESTIGATIONS (2017)
Snort-Term Prospective Clinical Evaluation of Monolithic and Partially Veneered Zirconia Single Crowns
Wolfgang Boemicke et al.
JOURNAL OF ESTHETIC AND RESTORATIVE DENTISTRY (2017)
In vitro evaluation of marginal discrepancy of monolithic zirconia restorations fabricated with different CAD-CAM systems
Tamer A. Hamza et al.
JOURNAL OF PROSTHETIC DENTISTRY (2017)
Chairside CAD/CAM materials. Part 2: Flexural strength testing
Michael Wendler et al.
DENTAL MATERIALS (2017)
Chairside CAD/CAM materials. Part 1: Measurement of elastic constants and microstructural characterization
Renan Belli et al.
DENTAL MATERIALS (2017)
Gloss and Stain Resistance of Ceramic-Polymer CAD/CAM Restorative Blocks
Nathaniel C. Lawson et al.
JOURNAL OF ESTHETIC AND RESTORATIVE DENTISTRY (2016)
Comparison of human enamel and polymer-infiltrated-ceramic network material ENAMIC through micro- and nano-mechanical testing
Jie Min et al.
CERAMICS INTERNATIONAL (2016)
Microstructure characterization and SCG of newly engineered dental ceramics
Nathalia de Carvalho Ramosa et al.
DENTAL MATERIALS (2016)
Interpenetrating network ceramic-resin composite dental restorative materials
M. V. Swain et al.
DENTAL MATERIALS (2016)
3D printing with polymers: Challenges among expanding options and opportunities
Jeffrey W. Stansbury et al.
DENTAL MATERIALS (2016)
A New Classification System for All-Ceramic and Ceramic-like Restorative Materials
Stefano Gracis et al.
INTERNATIONAL JOURNAL OF PROSTHODONTICS (2016)
Optical properties of pre-colored dental monolithic zirconia ceramics
Hee-Kyung Kim et al.
JOURNAL OF DENTISTRY (2016)
A 2-year Retrospective Clinical study of Enamic Crowns Performed in a Private Practice Setting
Geetika Chirumamilla et al.
Journal of Esthetic and Restorative Dentistry (2016)
Principles of crystal phase formation in Ivoclar Vivadent glass-ceramics for dental restorations
Christian Ritzberger et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)
Fracture rate of monolithic zirconia restorations up to 5 years: A dental laboratory survey
Taiseer A. Sulaiman et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Comparison of four monolithic zirconia materials with conventional ones: Contrast ratio, grain size, four-point flexural strength and two-body wear
Bogna Stawarczyka et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Mechanical behavior of a Y-TZP ceramic for monolithic restorations: effect of grinding and low-temperature aging
G. K. R. Pereira et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Effect of the amount of thickness reduction on color and translucency of dental monolithic zirconia ceramics
Hee-Kyung Kim et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2016)
Influence of aging on flexural strength of translucent zirconia for monolithic restorations
Brian D. Flinn et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Damage tolerance of indirect restorative materials (including PICN) after simulated bur adjustments
Andrea Coldea et al.
DENTAL MATERIALS (2015)
All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part II: Multiple-unit FDPs
Bjarni Elvar Pjetursson et al.
DENTAL MATERIALS (2015)
Influence of coloring procedure on flexural resistance of zirconia blocks
Maurizio Sedda et al.
JOURNAL OF PROSTHETIC DENTISTRY (2015)
Comparison of mechanical properties of three machinable ceramics with an experimental fluorophlogopite glass ceramic
Brian T. W. Leung et al.
JOURNAL OF PROSTHETIC DENTISTRY (2015)
Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness
Daniel Awad et al.
JOURNAL OF PROSTHETIC DENTISTRY (2015)
Characterization of a polymer-infiltrated ceramic-network material
Alvaro Della Bona et al.
DENTAL MATERIALS (2014)
Effect on in vitro fracture resistance of the technique used to attach lithium disilicate ceramic veneer to zirconia frameworks
M. Schmitter et al.
DENTAL MATERIALS (2014)
Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia
Hee-Kyung Kim et al.
DENTAL MATERIALS (2014)
Making yttria-stabilized tetragonal zirconia translucent
Yu Zhang
DENTAL MATERIALS (2014)
Influence of veneering porcelain thickness and cooling rate on residual stresses in zirconia molar crowns
Basil Al-Amleh et al.
DENTAL MATERIALS (2014)
Resin-composite Blocks for Dental CAD/CAM Applications
N. D. Ruse et al.
JOURNAL OF DENTAL RESEARCH (2014)
Emerging Ceramic-based Materials for Dentistry
I. Denry et al.
JOURNAL OF DENTAL RESEARCH (2014)
Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing
Nathaniel C. Lawson et al.
JOURNAL OF DENTISTRY (2014)
ANTAGONIST WEAR OF THREE CAD/CAM ANATOMIC CONTOUR ZIRCONIA CERAMICS
Ji-Hee Park et al.
JOURNAL OF PROSTHETIC DENTISTRY (2014)
Determination of the mechanical behavior of lithium disilicate glass ceramics by nanoindentation & scanning probe microscopy
Calvin M. Smith et al.
MATERIALS CHEMISTRY AND PHYSICS (2014)
Effect of core design and veneering technique on damage and reliability of Y-TZP-supported crowns
Petra C. Guess et al.
DENTAL MATERIALS (2013)
Mechanical properties of polymer-infiltrated-ceramic-network materials
Andrea Coldea et al.
DENTAL MATERIALS (2013)
In-vitro strength degradation of dental ceramics and novel PICN material by sharp indentation
Andrea Coldea et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Nucleation Kinetics of Lithium Metasilicate in ZrO2-Bearing Lithium Disilicate Glasses for Dental Application
Susanne Krueger et al.
INTERNATIONAL JOURNAL OF APPLIED GLASS SCIENCE (2013)
Nanomechanical properties of dental resin-composites
S. El-Safty et al.
DENTAL MATERIALS (2012)
Chipping behaviour of all-ceramic crowns with zirconia framework and CAD/CAM manufactured veneer
M. Schmitter et al.
JOURNAL OF DENTISTRY (2012)
Effect of Alumina Dopant on Transparency of Tetragonal Zirconia
Haibin Zhang et al.
JOURNAL OF NANOMATERIALS (2012)
Ten-year outcome of three-unit fixed dental prostheses made from monolithic lithium disilicate ceramic
Matthias Kern et al.
JOURNAL OF THE AMERICAN DENTAL ASSOCIATION (2012)
Potentials of the Direct inkjet printing method for manufacturing 3Y-TZP based dental restorations
Emre Oezkol et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Measuring residual stress in ceramic zirconia-porcelain dental crowns by nanoindentation
Y. Zhang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
The Effect of Core Material, Veneering Porcelain, and Fabrication Technique on the Biaxial Flexural Strength and Weibull Analysis of Selected Dental Ceramics
Wei-Shao Lin et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2012)
In vitro evaluation of fracture strength of zirconia restoration veneered with various ceramic materials
Yu-Sung Choi et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2012)
Different CAD/CAM-processing routes for zirconia restorations: influence on fitting accuracy
Philipp Kohorst et al.
CLINICAL ORAL INVESTIGATIONS (2011)
A novel polymer infiltrated ceramic dental material
Li-Hong He et al.
DENTAL MATERIALS (2011)
Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques
Bogna Stawarczyk et al.
DENTAL MATERIALS (2011)
COMPLETE AND PARTIAL CONTOUR ZIRCONIA DESIGNS FOR CROWNS AND FIXED DENTAL PROSTHESES: A CLINICAL REPORT
Baldwin W. Marchack et al.
JOURNAL OF PROSTHETIC DENTISTRY (2011)
Transparent Tetragonal Yttria-Stabilized Zirconia Ceramics: Influence of Scattering Caused by Birefringence
Jens Klimke et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
Additive CAD/CAM Process for Dental Prostheses
Nelson R. F. A. Silva et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2011)
Micro-indentation fracture behavior of human enamel
Sanosh Kunjalukkal Padmanabhan et al.
DENTAL MATERIALS (2010)
Survival probability of zirconia-based fixed dental prostheses up to 5 yr: a systematic review of the literature
Jaana-Sophia Schley et al.
EUROPEAN JOURNAL OF ORAL SCIENCES (2010)
DEVELOPMENT OF A CLINICALLY VALIDATED BULK FAILURE TEST FOR CERAMIC CROWNS
J. Robert Kelly et al.
JOURNAL OF PROSTHETIC DENTISTRY (2010)
Properties and Clinical Application of Three Types of Dental Glass-Ceramics and Ceramics for CAD-CAM Technologies
Christian Ritzberger et al.
MATERIALS (2010)
A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain
Yu-Seok Jung et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2010)
A review of dental CAD/CAM: current status and future perspectives from 20 years of experience
Takashi Miyazaki et al.
DENTAL MATERIALS JOURNAL (2009)
Direct Inkjet Printing of dental Prostheses Made of Zirconia
J. Ebert et al.
JOURNAL OF DENTAL RESEARCH (2009)
Strength influencing variables on CAD/CAM zirconia frameworks
Hang Wang et al.
DENTAL MATERIALS (2008)
Brittleness index of machinable dental materials and its relation to the marginal chipping factor
Effrosyni A. Tsitrou et al.
JOURNAL OF DENTISTRY (2007)
Which mechanical and physical testing methods are relevant for predicting the clinical performance of ceramic-based dental prostheses?
K. F. Anusavice et al.
CLINICAL ORAL IMPLANTS RESEARCH (2007)
Influence of ZrO2 on the crystallization and properties of lithium disilicate glass-ceramics derived from a multi-component system
Elke Apel et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)
Clinical applications of glass-ceramics in dentistry
Wolfram Hoeland et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2006)
Computer-aided design and fabrication of dental restorations - Current systems and future possibilities
Joerg R. Strub et al.
JOURNAL OF THE AMERICAN DENTAL ASSOCIATION (2006)
Flexural strength of a layered zirconia and porcelain dental all-ceramic system
SN White et al.
JOURNAL OF PROSTHETIC DENTISTRY (2005)
Contemporary materials and technologies for all-ceramic fixed partial dentures: A review of the literature
AJ Raigrodski
JOURNAL OF PROSTHETIC DENTISTRY (2004)
Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics
M Guazzato et al.
DENTAL MATERIALS (2004)
Machining characteristics and surface integrity of yttria stabilized tetragonal zirconia in high speed deep grinding
H Huang
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Influence of microstructure and chemistry on the fracture toughness of dental ceramics
JB Quinn et al.
DENTAL MATERIALS (2003)
Microwave sintering of transparent alumina
JP Cheng et al.
MATERIALS LETTERS (2002)
Stereolithography of structural complex ceramic parts
T Chartier et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Indentation modulus and hardness of whisker-reinforced heat-cured dental resin composites
HHK Xu et al.
DENTAL MATERIALS (2000)