Tunable morphology and hydrophilicity to epoxy resin from copper oxide nanoparticles

Nanosized copper (I) oxide particles (nCOP) synthesized through chemical reduction reaction was employed to formulate an epoxy based novel nanocomposite material. Wetting characteristics of the nanocomposites were studied through contact angle measurements as a function of filler content. The contact angle of epoxy with water decreased from 79 to 35 when the filler content is varied from 0 to 10 phr indicating an upsurge in the hydrophilicity of the material. When the nCOP content is increased from 0 to 10phr, the surface free energy and work of adhesion endured a hike around 50% by magnitude, interfacial free energy suffered a decrease by half of its initial value, spreading coefficient became more positive while Girifalco-Good's interaction parameter changed by around 10%. The improvement in hydrophilicity of nanocomposite was attributed to the enrichment of the polymer surface with nano- particles. The contact angle values of the nanocomposites were theoretically predicted using Li-Neumann- Young equation and compared with the experimental observations. The microstructure development in the nanocomposites was analyzed through plasma etching followed by electron microscopic imaging. Finally the tuning of the hydrophilicity of the epoxy resin in presence of varying nCOP content have been correlated with the morphology and microstructure development in the nanocomposites. (C) 2017 Elsevier Ltd. All rights reserved.