Related references
Note: Only part of the references are listed.Efficient and Air-Stable Mixed-Cation Lead Mixed-Halide Perovskite Solar Cells with n-Doped Organic Electron Extraction Layers
Zhiping Wang et al.
ADVANCED MATERIALS (2017)
π-Conjugated Lewis Base: Efficient Trap-Passivation and Charge-Extraction for Hybrid Perovskite Solar Cells
Yuze Lin et al.
ADVANCED MATERIALS (2017)
A Close Look at the Structure of the TiO2-APTES Interface in Hybrid Nanomaterials and Its Degradation Pathway: An Experimental and Theoretical Study
Daniela Meroni et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells
Lijian Zuo et al.
NANO LETTERS (2017)
Quantitative Doping of Chlorine in Formamidinium Lead Trihalide (FAPbI3-xClx) for Planar Heterojunction Perovskite Solar Cells
Cheng Mu et al.
ADVANCED ENERGY MATERIALS (2017)
Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface
Kyung Taek Cho et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Optimization of the Ag/PCBM interface by a rhodamine interlayer to enhance the efficiency and stability of perovskite solar cells
John Ciro et al.
NANOSCALE (2017)
Enhanced performance of inverted perovskite solar cells using solution-processed carboxylic potassium salt as cathode buffer layer
Zhao Hu et al.
ORGANIC ELECTRONICS (2017)
An ammonia modified PEDOT: PSS for interfacial engineering in inverted planar perovskite solar cells
Weihai Sun et al.
ORGANIC ELECTRONICS (2017)
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Hairen Tan et al.
SCIENCE (2017)
Amino-Acid-Induced Preferential Orientation of Perovskite Crystals for Enhancing Interfacial Charge Transfer and Photovoltaic Performance
Yen-Chen Shih et al.
SMALL (2017)
One-Year stable perovskite solar cells by 2D/3D interface engineering
G. Grancini et al.
NATURE COMMUNICATIONS (2017)
Suppressed decomposition of organometal halide perovskites by impermeable electron-extraction layers in inverted solar cells
K. O. Brinkmann et al.
NATURE COMMUNICATIONS (2017)
Self-Encapsulating Thermostable and Air-Resilient Semitransparent Perovskite Solar Cells
J. Zhao et al.
ADVANCED ENERGY MATERIALS (2017)
Hybrid Photoconductive Cathode Interlayer Materials Composed of Perylene Bisimide Photosensitizers and Zinc Oxide for High Performance Polymer Solar Cells
Zengqi Xie et al.
ADVANCED ENERGY MATERIALS (2017)
Large-Grain Formamidinium PbI3-xBrx for High-Performance Perovskite Solar Cells via Intermediate Halide Exchange
Mingzhu Long et al.
ADVANCED ENERGY MATERIALS (2017)
A multifunctional poly-N-vinylcarbazole interlayer in perovskite solar cells for high stability and efficiency: a test with new triazatruxene-based hole transporting materials
Pei-Yang Su et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Interface engineering in planar perovskite solar cells: energy level alignment, perovskite morphology control and high performance achievement
Guang Yang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Interface Engineering of a Compatible PEDOT Derivative Bilayer for High-Performance Inverted Perovskite Solar Cells
Xichang Bao et al.
ADVANCED MATERIALS INTERFACES (2017)
High-Mobility p-Type Organic Semiconducting Interlayer Enhancing Efficiency and Stability of Perovskite Solar Cells
Mingyu Zhang et al.
ADVANCED SCIENCE (2017)
Performance Enhancement of Lead-Free Tin Based Perovskite Solar Cells with Reducing Atmosphere-Assisted Dispersible Additive
Tze-Bin Song et al.
ACS ENERGY LETTERS (2017)
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Kevin A. Bush et al.
NATURE ENERGY (2017)
Substrate-dependent electronic structure and film formation of MAPbI3 perovskites
Selina Olthof et al.
SCIENTIFIC REPORTS (2017)
Indium-Free Perovskite Solar Cells Enabled by Impermeable Tin-Oxide Electron Extraction Layers
Ting Hu et al.
ADVANCED MATERIALS (2017)
Environmental benefits of reduced electricity use exceed impacts from lead use for perovskite based tandem solar cell
Mara Hauck et al.
RENEWABLE ENERGY (2017)
Poly(4-Vinylpyridine)-Based Interfacial Passivation to Enhance Voltage and Moisture Stability of Lead Halide Perovskite Solar Cells
Bhumika Chaudhary et al.
CHEMSUSCHEM (2017)
Enhancing the Durability and Carrier Selectivity of Perovskite Solar Cells Using a Blend Interlayer
Dong Hun Sin et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Multichannel Interdiffusion Driven FASnI3 Film Formation Using Aqueous Hybrid Salt/Polymer Solutions toward Flexible Lead-Free Perovskite Solar Cells
Jun Xi et al.
ADVANCED MATERIALS (2017)
Aminosilane as a Molecular Linker between the Electron-Transport Layer and Active Layer for Efficient Inverted Polymer Solar Cells
Ping Fu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
A Triarylamine-Based Anode Modifier for Efficient Organohalide Perovskite Solar Cells
Qianqian Lin et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
ZrO2/TiO2 Electron Collection Layer for Efficient Meso-Superstructured Hybrid Perovskite Solar Cells
Mario Alejandro Mejia Escobar et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Highly Efficient Planar Perovskite Solar Cells Via Interfacial Modification with Fullerene Derivatives
Yang Dong et al.
SMALL (2016)
Facilitating Electron Transportation in Perovskite Solar Cells via Water-Soluble Fullerenol Interlayers
Tiantian Cao et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Large Planar π-Conjugated Porphyrin for Interfacial Engineering in p-i-n Perovskite Solar Cells
Bobo Li et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Induced Crystallization of Perovskites by a Perylene Underlayer for High-Performance Solar Cells
Zhao-Kui Wang et al.
ACS NANO (2016)
Polymer Solar Cells Exceeding 10% Efficiency Enabled via a Facile Star-Shaped Molecular Cathode Interlayer with Variable Counterions
Zhenguo Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Electrodeposition of gold templated by patterned thiol monolayers
Zhe She et al.
APPLIED SURFACE SCIENCE (2016)
Decreasing Charge Losses in Perovskite Solar Cells Through mp-TiO2/MAPI Interface Engineering
Jose Manuel Marin-Beloqui et al.
CHEMISTRY OF MATERIALS (2016)
Integrated hybrid life cycle assessment and supply chain environmental profile evaluations of lead-based (lead zirconate titanate) versus lead-free (potassium sodium niobate) piezoelectric ceramics
T. Ibn-Mohammed et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Carrier trapping and recombination: the role of defect physics in enhancing the open circuit voltage of metal halide perovskite solar cells
Tomas Leijtens et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells
Daniel Bryant et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency
Michael Saliba et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Surface Modification of Indium Tin Oxide with Functionalized Perylene Diimides: Characterization of Orientation, Electron-Transfer Kinetics and Electronic Structure
Yilong Zheng et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2016)
Evolution of Diffusion Length and Trap State Induced by Chloride in Perovskite Solar Cell
Feng Xian Xie et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2016)
Analysis of the Hysteresis Behavior of Perovskite Solar Cells with Interfacial Fullerene Self-Assembled Monolayers
Marta Valles-Pelarda et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)
Fabrication and Characterization of ZnO Langmuir-Blodgett Film and Its Use in Metal-Insulator-Metal Tunnel Diode
Ibrahim Azad et al.
LANGMUIR (2016)
Nanoscience in the era of global science and global change-Cooperative, quantitative, and focused on benefit to humanity
A. Paul Alivisatos
NANO RESEARCH (2016)
High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells
Hsinhan Tsai et al.
NATURE (2016)
Perylene diimide based all small-molecule organic solar cells: Impact of branched-alkyl side chains on solubility, photophysics, self-assembly, and photovoltaic parameters
Jon-Paul Sun et al.
ORGANIC ELECTRONICS (2016)
Efficient perovskite solar cells using trichlorosilanes as perovskite/PCBM interface modifiers
Jiandong Wang et al.
ORGANIC ELECTRONICS (2016)
Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Federico Bella et al.
SCIENCE (2016)
Morphology control of planar heterojunction perovskite solar cells with fluorinated PDI films as organic electron transport layer
Jiachi Huang et al.
SOLAR ENERGY (2016)
High boiling point solvent-based dye solar cells pass a harsh thermal ageing test
Thomas Stergiopoulos et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Interface studies of the planar heterojunction perovskite solar cells
Zhenhua Lin et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Stability of perovskite solar cells
Dian Wang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Enhancing stability and efficiency of perovskite solar cells with crosslinkable silane-functionalized and doped fullerene
Yang Bai et al.
NATURE COMMUNICATIONS (2016)
Achieving high efficiency and improved stability in large-area ITO-free perovskite solar cells with thiol-functionalized self-assembled monolayers
Chih-Yu Chang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Self-assembled tri-, tetra- and penta-ethylene glycols as easy, expedited and universal interfacial cathode-modifiers for inverted polymer solar cells
Fong-Yi Cao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Surface passivation effect by fluorine plasma treatment on ZnO for efficiency and lifetime improvement of inverted polymer solar cells
Ermioni Polydorou et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
New generation perovskite solar cells with solution-processed amino-substituted perylene diimide derivative as electron-transport Layer
Hua Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Triazine-core-containing star-shaped compounds as cathode interlayers for efficient inverted polymer solar cells
Yuan Liu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Enhanced Ambient Stability of Efficient Perovskite Solar Cells by Employing a Modified Fullerene Cathode Interlayer
Zonglong Zhu et al.
ADVANCED SCIENCE (2016)
Functionalization of perovskite thin films with moisture-tolerant molecules
Shuang Yang et al.
NATURE ENERGY (2016)
Efficient perovskite solar cells via simple interfacial modification toward a mesoporous TiO2 electron transportation layer
L. F. Zhu et al.
RSC ADVANCES (2016)
Enhanced Lifetime of Polymer Solar Cells by Surface Passivation of Metal Oxide Buffer Layers
Swaminathan Venkatesan et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
High-Performance Planar Perovskite Optoelectronic Devices: A Morphological and Interfacial Control by Polar Solvent Treatment
Jae Choul Yu et al.
ADVANCED MATERIALS (2015)
Single-Junction Organic Solar Cells Based on a Novel Wide-Bandgap Polymer with Efficiency of 9.7%
Lijun Huo et al.
ADVANCED MATERIALS (2015)
An All-Small-Molecule Organic Solar Cell with High Efficiency Nonfullerene Acceptor
Oh Kyu Kwon et al.
ADVANCED MATERIALS (2015)
Finely Tuned Polymer Interlayers Enhance Solar Cell Efficiency
Yao Liu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Simultaneous enhancement of photocurrent and open circuit voltage in a ZnO based organic solar cell by mixed self-assembled monolayers
Jian-Ming Chiu et al.
APPLIED ENERGY (2015)
Bifunctional alkyl chain barriers for efficient perovskite solar cells
Jing Zhang et al.
CHEMICAL COMMUNICATIONS (2015)
Neutral amine based alcohol-soluble interface materials for inverted polymer solar cells: realizing high performance and overcoming solvent erosion
Qu Zhang et al.
CHEMICAL COMMUNICATIONS (2015)
Colloidal Quantum Dot Solar Cells
Graham H. Carey et al.
CHEMICAL REVIEWS (2015)
Enhanced Performance and Stability of Semitransparent Perovskite Solar Cells Using Solution-Processed Thiol-Functionalized Cationic Surfactant as Cathode Buffer Layer
Chih-Yu Chang et al.
CHEMISTRY OF MATERIALS (2015)
Origin of the Thermal Instability in CH3NH3PbI3 Thin Films Deposited on ZnO
Jinli Yang et al.
CHEMISTRY OF MATERIALS (2015)
An alcohol-soluble perylene diimide derivative as cathode interfacial layer for PDI-based nonfullerene organic solar cells
Mingguang Li et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2015)
Perovskite photovoltaics: life-cycle assessment of energy and environmental impacts
Jian Gong et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
Yaowen Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Photoconductive Cathode Inter layer for Highly Efficient Inverted Polymer Solar Cells
Li Nian et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Enhanced Photovoltaic Performance of CH3NH3Pbl3 Perovskite Solar Cells through Interfacial Engineering Using Self-Assembling Monolayer
Lijian Zuo et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer
Linfeng Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
New One-Step Thiol Functionalization Procedure for Ni by Self-Assembled Monolayers
Claudio Fontanesi et al.
LANGMUIR (2015)
High-Efficiency Colloidal Quantum Dot Photovoltaics via Robust Self-Assembled Mono layers
Gi-Hwan Kim et al.
NANO LETTERS (2015)
Stable high-performance hybrid perovskite solar cells with ultrathin polythiophene as hole-transporting layer
Weibo Yan et al.
NANO RESEARCH (2015)
Thiols as interfacial modifiers to enhance the performance and stability of perovskite solar cells
Jing Cao et al.
NANOSCALE (2015)
Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides
Xiong Li et al.
NATURE CHEMISTRY (2015)
Flexible high power-per-weight perovskite solar cells with chromium oxide-metal contacts for improved stability in air
Martin Kaltenbrunner et al.
NATURE MATERIALS (2015)
Fully vacuum-processed perovskite solar cells with high open circuit voltage using MoO3/NPB as hole extraction layers
Beom-Soo Kim et al.
ORGANIC ELECTRONICS (2015)
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Wei Chen et al.
SCIENCE (2015)
Application of a water-soluble metallophthalocyanine derivative as a cathode interlayer for the polymer solar cells
Tao Jia et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
A real-time study of the benefits of co-solvents in polymer solar cell processing
Jacobus J. van Franeker et al.
NATURE COMMUNICATIONS (2015)
Stability of Metal Halide Perovskite Solar Cells
Tomas Leijtens et al.
ADVANCED ENERGY MATERIALS (2015)
Perylene bisimide as the cathode modifier in organic photovoltaics: the role of aggregation morphology on the interlayer performance
Wenqiang Zhang et al.
RSC ADVANCES (2015)
Thermally evaporable 5,10-dihydroindeno[2,1-a] indenes form efficient interfacial layers in organic solar cells
Yi Wei et al.
RSC ADVANCES (2015)
Giant enhancement of inverted polymer solar cells efficiency by manipulating dual interlayers with integrated approaches
Hsing-Hua Hsieh et al.
RSC ADVANCES (2015)
Interfacial engineering by using self-assembled monolayer in mesoporous perovskite solar cell
Bobo Li et al.
RSC ADVANCES (2015)
Interfacial Layer Engineering for Performance Enhancement in Polymer Solar Cells
Hao Zeng et al.
POLYMERS (2015)
Highly efficient polymer solar cells based on a universal cathode interlayer composed of metallophthalocyanine derivative with good film-forming property
Tao Jia et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Critical role of the external bias in improving the performance of polymer solar cells with a small molecule electrolyte interlayer
Xiaodong Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Implications of TiO2 surface functionalization on polycrystalline mixed halide perovskite films and photovoltaic devices
Valentino L. P. Guerra et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Enhancing the photocurrent of perovskite solar cells via modification of the TiO2/CH3NH3PbI3 heterojunction interface with amino acid
Y. C. Shih et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
An alcohol soluble amino-functionalized organoplatinum(II) complex as the cathode interlayer for highly efficient polymer solar cells
Shengjian Liu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
Highly efficient and stable planar perovskite solar cells with reduced graphene oxide nanosheets as electrode interlayer
Jun-Seok Yeo et al.
NANO ENERGY (2015)
Self-assembled perylene bisimide J-aggregates as promising cathode modifiers for highly efficient inverted polymer solar cells
Zengqi Xie et al.
MATERIALS HORIZONS (2015)
Efficient Spray-Coated Colloidal Quantum Dot Solar Cells
Illan J. Kramer et al.
ADVANCED MATERIALS (2015)
An Organic Surface Modifier to Produce a High Work Function Transparent Electrode for High Performance Polymer Solar Cells
Hyosung Choi et al.
ADVANCED MATERIALS (2015)
Interface Engineering of Perovskite Hybrid Solar Cells with Solution-Processed Perylene-Diimide Heterojunctions toward High Performance
Jie Min et al.
CHEMISTRY OF MATERIALS (2015)
Application of Biuret, Dicyandiamide, or Urea as a Cathode Buffer Layer toward the Efficiency Enhancement of Polymer Solar Cells
Xuemei Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Enhanced Photoluminescence and Solar Cell Performance via Lewis Base Passivation of Organic Inorganic Lead Halide Perovskites
Nakita K. Noel et al.
ACS NANO (2014)
Morphological Control for High Performance, Solution-Processed Planar Heterojunction Perovskite Solar Cells
Giles E. Eperon et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Nickel Oxide Electrode Interlayer in CH3NH3PbI3 Perovskite/PCBM Planar-Heterojunction Hybrid Solar Cells
Jun-Yuan Jeng et al.
ADVANCED MATERIALS (2014)
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Wan-Jian Yin et al.
APPLIED PHYSICS LETTERS (2014)
A hydrophobic hole transporting oligothiophene for planar perovskite solar cells with improved stability
Lingling Zheng et al.
CHEMICAL COMMUNICATIONS (2014)
Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells
Zhi-Guo Zhang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
All-Solid Perovskite Solar Cells with HOCO-R-NH3+I- Anchor-Group Inserted between Porous Titania and Perovskite
Yuhei Ogomi et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Supersaturated Self-Assembled Charge-Selective Interfacial Layers for Organic Solar Cells
Charles Kiseok Song et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Low-Temperature Processed Electron Collection Layers of Graphene/TiO2 Nanocomposites in Thin Film Perovskite Solar Cells
Jacob Tse-Wei Wang et al.
NANO LETTERS (2014)
Supramolecular Halogen Bond Passivation of Organic-Inorganic Halide Perovskite Solar Cells
Antonio Abate et al.
NANO LETTERS (2014)
The light and shade of perovskite solar cells
Michael Graetzel
NATURE MATERIALS (2014)
Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells
Nam Joong Jeon et al.
NATURE MATERIALS (2014)
Lead-free solid-state organic-inorganic halide perovskite solar cells
Feng Hao et al.
NATURE PHOTONICS (2014)
Comparison of dimethyl sulfoxide treated highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) electrodes for use in indium tin oxide-free organic electronic photovoltaic devices
N. K. Unsworth et al.
ORGANIC ELECTRONICS (2014)
Fluorinated and hydrogenated self-assembled monolayers (SAMs) on anodes: Effects of SAM chemistry on device characteristics of polymer solar cells
He Wang et al.
ORGANIC ELECTRONICS (2014)
Zwitterionic ammonium and neutral amino molecules as cathode interlayer for inverted polymer solar cells
Wenjun Zhang et al.
ORGANIC ELECTRONICS (2014)
Interface engineering of highly efficient perovskite solar cells
Huanping Zhou et al.
SCIENCE (2014)
Improvement of organic solar cells with ammonium salt, tetrabutylamnrionium tetraphenylborate, as cathode buffer layer
Xitian Wang et al.
SYNTHETIC METALS (2014)
Highly efficient fullerene/perovskite planar heterojunction solar cells via cathode modification with an amino-functionalized polymer interlayer
Qifan Xue et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
MAPbl3-x Clx Mixed Halide Perovskite for Hybrid Solar Cells: The Role of Chloride as Dopant on the Transport and Structural Properties
Silvia Colella et al.
CHEMISTRY OF MATERIALS (2013)
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
James M. Ball et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Julian Burschka et al.
NATURE (2013)
Efficient planar heterojunction perovskite solar cells by vapour deposition
Mingzhen Liu et al.
NATURE (2013)
Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber
Samuel D. Stranks et al.
SCIENCE (2013)
Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates
Pablo Docampo et al.
NATURE COMMUNICATIONS (2013)
Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad Absorption
Yongfang Li
ACCOUNTS OF CHEMICAL RESEARCH (2012)
High-performance polymer solar cells with a conjugated zwitterion by solution processing or thermal deposition as the electron-collection interlayer
Kuan Sun et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Environment-Controlled Tethering by Aggregation and Growth of Phosphonic Acid Monolayers on Silicon Oxide
Abraham Vega et al.
LANGMUIR (2012)
A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics
Yinhua Zhou et al.
SCIENCE (2012)
Cross-Linked Perylene Diimide-Based n-Type Interfacial Layer for Inverted Organic Photovoltaic Devices
Alexander W. Hains et al.
ACS APPLIED MATERIALS & INTERFACES (2011)
Graphene Oxide Inter layers for Robust, High-Efficiency Organic Photovoltaics
Ian P. Murray et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)
Enhanced performances of hybrid polymer solar cells with p-methoxybenzoic acid modified zinc oxide nanoparticles as an electron acceptor
Shuyan Shao et al.
ORGANIC ELECTRONICS (2011)
Enhanced Performance in Polymer Solar Cells by Surface Energy Control
Xavier Bulliard et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Chemically Binding Carboxylic Acids onto TiO2 Nanoparticles with Adjustable Coverage by Solvothermal Strategy
Qiyun Qu et al.
LANGMUIR (2010)
Polymer solar cells that use self-assembled-monolayer-modified ZnO/Metals as cathodes
Hin-Lap Yip et al.
ADVANCED MATERIALS (2008)
The surface engineering of top electrode in inverted polymer bulk-heterojunction solar cells
Jihwan Kim et al.
APPLIED PHYSICS LETTERS (2008)
Interfacial modification to improve inverted polymer solar cells
Steven K. Hau et al.
JOURNAL OF MATERIALS CHEMISTRY (2008)
Control of the electrode work function and active layer morphology via surface modification of indium tin oxide for high efficiency organic photovoltaics
Jong Soo Kim et al.
APPLIED PHYSICS LETTERS (2007)
Effects of molecular interface modification in hybrid organic-inorganic photovoltaic cells
Chiatzun Goh et al.
JOURNAL OF APPLIED PHYSICS (2007)
Investigation of solid surfaces modified by Langmuir-Blodgett monolayers using sum-frequency vibrational spectroscopy and X-ray photoelectron spectroscopy
T Keszthelyi et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2006)
Development of air stable polymer solar cells using an inverted gold on top anode structure
Y Sahin et al.
THIN SOLID FILMS (2005)
Self-assembled monolayers of thiolates on metals as a form of nanotechnology
JC Love et al.
CHEMICAL REVIEWS (2005)
Dye-sensitized solid-state heterojunction solar cells
M Gratzel
MRS BULLETIN (2005)
Electrodesorption potentials of self-assembled alkanethiolate monolayers on copper electrodes.: An experimental and theoretical study
O Azzaroni et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2003)
Share Paper
