Low-Voltage Operation of ZrO2-Gated n-Type Thin-Film Transistors Based on a Channel Formed by Hybrid Phases of SnO and SnO2

With SnO typically regarded as a p-type oxide semiconductor, an oxide semiconductor formed by hybrid phases of mainly SnO and a small amount of SnO2 with an average [0]/[Sn] ratio of 1.1 was investigated as a channel material for n-type thin-film transistors (TFTs). Furthermore, an appropriate number of oxygen vacancies were introduced into the oxide during annealing at 400 degrees C in ambient N-2, making both SnO and SnO2 favorable for current conduction. By using high-kappa ZrO2 with a capacitance equivalent thickness of 13.5 nm as the gate dielectric, the TFTs processed at 400 degrees C demonstrated a steep subthreshold swing (SS) of 0.21 V/dec, and this can be ascribed to the large gate capacitance along with a low interface trap density (D-it) value of 5.16 x 10(11) cm(-2) eV(-1). In addition, the TFTs exhibit a relatively high electron mobility of 7.84 cm(2)/Vs, high ON/OFF current ratios of up to 2.5 x 10(5), and a low gate leakage current at a low operation voltage of 3 V. The TFTs also prove its high reliability performance by showing negligible degradation of SS and threshold voltage (V-T) against high field stress (-10 MV/cm). When 3% oxygen annealing is combined with a thinner channel thickness, TFTs with even higher I-ON/I-OFF ratios exceeding 10(7) can also be obtained. With these promising characteristics, the overall performance of the TFTs displays competitive advantages compared with other n-type TFTs formed on binary or even some multicomponent oxide semiconductors and paves a promising and economic avenue to implement an n-type oxide semiconductor without doping for production-worthy TFT technology. Most importantly, when combined with the typical SnO-based p-type oxide semiconductor, it would usher in a new era in achieving high-performance complementary metal oxide semiconductor circuits by using the same SnO-based oxide semiconductor.