Related references
Note: Only part of the references are listed.Controlling many-body states by the electric-field effect in a two-dimensional material
L. J. Li et al.
NATURE (2017)
Microstructure and Mechanical Properties of 18%Mn TWIP/TRIP Steels Processed by Warm or Hot Rolling
Andrey Belyakov et al.
STEEL RESEARCH INTERNATIONAL (2017)
Enhancement of the strength-ductility combination of twinning-induced/transformation-induced plasticity steels by reversion annealing
Frederike Berrenberg et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Medium-manganese steels processed by austenite-reverted-transformation annealing for automotive applications
Yan Ma
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Medium Mn transformation-induced plasticity steels: Recent progress and challenges
Dong-Woo Suh et al.
SCRIPTA MATERIALIA (2017)
Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys
Zhiming Li et al.
SCIENTIFIC REPORTS (2017)
Individual phase constitutive properties of a TRIP-assisted QP980 steel from a combined synchrotron X-ray diffraction and crystal plasticity approach
X. H. Hu et al.
ACTA MATERIALIA (2017)
A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior
Zhiming Li et al.
ACTA MATERIALIA (2017)
Effect of Strain Rate on Deformation-Induced Martensitic Transformation of Quenching and Partitioning Steels
Shuhui Li et al.
STEEL RESEARCH INTERNATIONAL (2016)
Microstructure Development and Mechanical Properties of Low-Silicon-Content TRIP-Assisted Steels after Coiling Process
Seyed Mohammad Kazem Hosseini et al.
STEEL RESEARCH INTERNATIONAL (2016)
Effect of the Cold Rolling Reduction on the Microstructural Characteristics and Mechanical Behavior of a 0.06%C-17%Mn TRIP/TWIP Steel
Diana Perez Escobar et al.
STEEL RESEARCH INTERNATIONAL (2016)
The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel
Jeongho Han et al.
ACTA MATERIALIA (2016)
Influence of partitioning on mechanical behavior of Q&P steels
A. Arlazarov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effects of Process Parameters on Spot Welding of TRIP and Quenching and Partitioning Steels
Pasquale Russo Spena et al.
STEEL RESEARCH INTERNATIONAL (2016)
Austenite Evolution and Solute Partitioning during Thermal Cycling in the Intercritical Range of a Medium-Mn Steel
Maria-Ioanna Tzini et al.
STEEL RESEARCH INTERNATIONAL (2016)
Characterization and modeling of mechanical behavior of quenching and partitioning steels
A. Arlazarov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of microstructure on retained austenite stability and tensile behaviour in an aluminum-alloyed TRIP steel
J. Chiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The size effect of initial martensite constituents on the microstructure and tensile properties of intercritically annealed Fe-9Mn-0.05C steel
Jeongho Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Interaction Between Deformation-Induced and Thermal Martensite in High-Manganese TRIP Steel
Haiyan Yang et al.
STEEL RESEARCH INTERNATIONAL (2015)
Impact Toughness of Medium-Mn Transformation-Induced Plasticity-Aided Steels
Koh-ichi Sugimoto et al.
STEEL RESEARCH INTERNATIONAL (2015)
Tensile Behavior of Intercritically Annealed Ultra-Fine Grained 8% Mn Multi-Phase Steel
Sangwon Lee et al.
STEEL RESEARCH INTERNATIONAL (2015)
From High-Entropy Alloys to High-Entropy Steels
Dierk Raabe et al.
STEEL RESEARCH INTERNATIONAL (2015)
Current opinion in medium manganese steel
Y. -K. Lee et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe-9Mn-0.05C steel
Jeongho Han et al.
ACTA MATERIALIA (2014)
Microstructure-properties relationship in a one-step quenched and partitioned steel
Xiaodong Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Tensile Behavior of Intercritically Annealed 10 pct Mn Multi-phase Steel
Sangwon Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Experimental and Numerical Investigations of the TRIP Effect in 1.4301Austenitic Stainless Steel Under Static Loading
Satyapriya Gupta et al.
STEEL RESEARCH INTERNATIONAL (2014)
Behavior of Transformation-Induced Plasticity during Adiabatic Shear Bands Formation in High Manganese Steels
Xiurong Sun et al.
STEEL RESEARCH INTERNATIONAL (2014)
Control of Strain Hardening Behavior in High-Mn Austenitic Steels
Wenwen Song et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2014)
Effects of Intercritical Annealing Temperature on Mechanical Properties of Fe-7.9Mn-0.14Si-0.05Al-0.07C Steel
Xianming Zhao et al.
MATERIALS (2014)
Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: A pathway to ductile martensite
D. Raabe et al.
ACTA MATERIALIA (2013)
Microstructure development and mechanical properties of quenching and partitioning (Q&P) steel and an incorporation of hot-dipping galvanization during Q&P process
Jing Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
On the effect of austenite stability on high cycle fatigue of TRIP 700 steel
G. N. Haidemenopoulos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Deformation microstructures and strengthening mechanisms of an ultrafine grained duplex medium-Mn steel
Chang Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Medium-Alloy Manganese-Rich Transformation-Induced Plasticity Steels
Dong Woo Suh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
The effect of morphology on the stability of retained austenite in a quenched and partitioned steel
X. C. Xiong et al.
SCRIPTA MATERIALIA (2013)
Strain Rate Sensitivity of Pre-Strained AISI 301LN2B Metastable Austenitic Stainless Steel
Patrick Larour et al.
STEEL RESEARCH INTERNATIONAL (2013)
Effect of Testing Temperature on Retained Austenite Stability of Cold Rolled CMnSi Steels Treated by Quenching and Partitioning Process
Weijun Feng et al.
STEEL RESEARCH INTERNATIONAL (2013)
Quenching and Partitioning Steel Heat Treatment
Li Wang et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2013)
Heat treatment effects on the microstructure and mechanical properties of a medium manganese steel (0.2C-5Mn)
H. F. Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Evolution of microstructure and mechanical properties of medium Mn steels during double annealing
A. Arlazarov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Role of ε martensite in tensile properties and hydrogen degradation of high-Mn steels
Young Soo Chun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Characterization and Prediction of Flow Behavior in High-Manganese Twinning Induced Plasticity Steels: Part I. Mechanism Maps and Work-Hardening Behavior
A. Saeed-Akbari et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Low stacking fault energy steels in the context of manganese-rich iron-based alloys
A. Saeed-Akbari et al.
SCRIPTA MATERIALIA (2012)
Work Hardening Behavior of Ultrafine Grained Duplex Medium-Mn Steels Processed by ART-Annealing
Rongmin Sun et al.
STEEL RESEARCH INTERNATIONAL (2012)
In Situ Characterization of Deformation Behavior of Austenitic High Manganese Steels
Sascha Hoffmann et al.
STEEL RESEARCH INTERNATIONAL (2012)
Study of the Combined TWIP/TRIP Effect in a High Mn Steel During Cold Rolling
Kirk Anguah Ofei et al.
STEEL RESEARCH INTERNATIONAL (2012)
Orientation Dependence of Martensitic Transformation in High Mn TRIP/TWIP Steels
Ping Yang et al.
STEEL RESEARCH INTERNATIONAL (2012)
Quenching and Partitioning of CMnSi Steels Containing Elevated Manganese Levels
Emmanuel De Moor et al.
STEEL RESEARCH INTERNATIONAL (2012)
Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation
O. Dmitrieva et al.
ACTA MATERIALIA (2011)
Development of Ultrafine Lamellar Ferrite and Austenite Duplex Structure in 0.2C5Mn Steel during ART-annealing
Chang Wang et al.
ISIJ INTERNATIONAL (2011)
Work hardening associated with ε-martensitic transformation, deformation twinning and dynamic strain aging in Fe-17Mn-0.6C and Fe-17Mn-0.8C TWIP steels
Motomichi Koyama et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Microstructure and mechanical properties of Fe-0.2C-5Mn steel processed by ART-annealing
W. Q. Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Strain hardening behavior of a TRIP/TWIP steel with 18.8% Mn
Hao Ding et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel
P. J. Gibbs et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Localized Deformation in Multiphase, Ultra-Fine-Grained 6 Pct Mn Transformation-Induced Plasticity Steel
Seawoong Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Analysis of Microstructure Evolution in Quenching and Partitioning Automotive Sheet Steel
John G. Speer et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Mn partitioning during the intercritical annealing of ultrafine-grained 6% Mn transformation-induced plasticity steel
Seok-Jae Lee et al.
SCRIPTA MATERIALIA (2011)
Experimental Determination and Simulation of Annealing Textures in Cold Rolled TWIP and TRIP Steels
L. A. Barrales-Mora et al.
STEEL RESEARCH INTERNATIONAL (2011)
Stress Oriented Delayed Cracking Induced by Dynamic Martensitic Transformation in Meta-Stable Austenitic Stainless Steels
Xiaofei Guo et al.
STEEL RESEARCH INTERNATIONAL (2011)
Strain Rate Dependent Flow Stress and Energy Absorption Behaviour of Cast CrMnNi TRIP/TWIP Steels
L. Krueger et al.
STEEL RESEARCH INTERNATIONAL (2011)
Cyclic Deformation Behaviour of Three Austenitic Cast CrMnNi TRIP/TWIP Steels with Various Ni Content
A. Glage et al.
STEEL RESEARCH INTERNATIONAL (2011)
The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel
Ali Hedayati et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite
Jie Shi et al.
SCRIPTA MATERIALIA (2010)
Designing Ultrahigh Strength Steels with Good Ductility by Combining Transformation Induced Plasticity and Martensite Aging
Dierk Raabe et al.
ADVANCED ENGINEERING MATERIALS (2009)
Recent developments in stainless steels
K. H. Lo et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)
The strain induced martensite transformation in austenitic stainless steels Part 1-Influence of temperature and strain history
K. Spencer et al.
MATERIALS SCIENCE AND TECHNOLOGY (2009)
Nanoprecipitate-hardened 1.5 GPa steels with unexpected high ductility
D. Raabe et al.
SCRIPTA MATERIALIA (2009)
Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics
W. Xu et al.
COMPUTATIONAL MATERIALS SCIENCE (2008)
Effects of temperature cycling and nitrogen on the stability of microstructures in austenitic stainless steels
Z. Z. Yuan et al.
MATERIALS CHARACTERIZATION (2008)
Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel
Arpan Das et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel
A. Dumay et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
A multi-scale model of martensitic transformation plasticity
V. G. Kouznetsova et al.
MECHANICS OF MATERIALS (2008)
Relative Influences of Aluminium and Silicon on the Kinetics of Bainite Formation from Intercritical Austenite
A. Mertens et al.
STEEL RESEARCH INTERNATIONAL (2008)
Influence of partial replacement of Si by Al on the change of phase fraction during heat treatment of TRIP steels
Dong-Woo Suh et al.
SCRIPTA MATERIALIA (2007)
Stepwise transformation behavior of the strain-induced martensitic transformation in a metastable stainless steel
Peter Hedstrom et al.
SCRIPTA MATERIALIA (2007)
Quenching and partitioning martensite - A novel steel heat treatment
D. V. Edmonds et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Quench and partitioning steel: a new AHSS concept for automotive anti-intrusion applications
Bruno C. De Cooman et al.
STEEL RESEARCH INTERNATIONAL (2006)
Low-alloyed TRIP-steels with optimized strength, forming and welding properties
Sandra Traint et al.
STEEL RESEARCH INTERNATIONAL (2006)
Behaviour model of austenitic stainless steels for automotive structural parts
Pierre-Olivier Santacreu et al.
STEEL RESEARCH INTERNATIONAL (2006)
Deformation induced Martensite formation and its effect on transformation induced plasticity (TRIP)
Andreas Weiss et al.
STEEL RESEARCH INTERNATIONAL (2006)
Microstructure development during high-velocity deformation
PJ Ferreira et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Design of martensite transformation temperature by calculation for austenitic steels
QX Dai et al.
MATERIALS CHARACTERIZATION (2004)
Microstructure and tensile properties in dual phase and trip steels
W Bleck et al.
STEEL RESEARCH INTERNATIONAL (2004)
On the relationship between mechanical properties and mechanisms of plastic deformation in metastable austenitic steels
A Pétein et al.
STEEL RESEARCH INTERNATIONAL (2004)
Structure-properties relationship in TRIP steels containing carbide-free bainite
BC De Cooman
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2004)
Carbon partitioning into austenite after martensite transformation
J Speer et al.
ACTA MATERIALIA (2003)
Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes
G Frommeyer et al.
ISIJ INTERNATIONAL (2003)
Influence of silicon, aluminium, phosphorus and copper on the phase transformations of low alloyed TRIP-steels
S Traint et al.
STEEL RESEARCH (2002)
Development of high strength low alloy TRIP-aided steels with annealed martensite matrix
K Sugimoto et al.
STEEL RESEARCH (2002)
Metallurgy of continuously annealed high strength TRIP steel sheet
H Matsuda et al.
STEEL RESEARCH (2002)
Detailed study of the transformation mechanisms in ferrous TRIP aided steels
T Iung et al.
STEEL RESEARCH (2002)
Improvement of weldability of TRIP steels by use of in-situ pre- and post-heat treatments
L Cretteur et al.
STEEL RESEARCH (2002)
Thermal and mechanical stability of retained austenite in aluminum-containing multiphase TRIP steels
S van der Zwaag et al.
ISIJ INTERNATIONAL (2002)
Determination of Ms temperature in steels: A Bayesian neural network model
C Capdevila et al.
ISIJ INTERNATIONAL (2002)
TRIP-assisted steels?
HKDH Bhadeshia
ISIJ INTERNATIONAL (2002)
The developments of cold-rolled TRIP-assisted multiphase steels. Al-alloyed TRIP-assisted multiphase steels
PJ Jacques et al.
ISIJ INTERNATIONAL (2001)
Microstructure in 316LN stainless steel fatigued at low temperature
T Kruml et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
The morphologies and characteristics of impact-induced martensite in 304L stainless steel
WS Lee et al.
SCRIPTA MATERIALIA (2000)
Share Paper
