Related references
Note: Only part of the references are listed.A comprehensive assessment on the impact of post-processing variables on tensile, compressive and bending characteristics for 3D printed components
David Impens et al.
RAPID PROTOTYPING JOURNAL (2016)
Development of a Precision Surface Polishing System for Parts Fabricated by Fused Deposition Modeling
Chil-Chyuan Kuo et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment
Ashu Garg et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Surface improvement of fused deposition modeling parts by barrel finishing
Alberto Boschetto et al.
RAPID PROTOTYPING JOURNAL (2015)
Rapid development of complex shaped customized products
Mushtaq Ahmad et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2015)
Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE)
Farzad Rayegani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
A hybrid M5′-genetic programming approach for ensuring greater trustworthiness of prediction ability in modelling of FDM process
A. Garg et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2014)
Improved Mechanical Properties of Fused Deposition Modeling-Manufactured Parts Through Build Parameter Modifications
Mohammad Shojib Hossain et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
A review of rapid prototyping integrated investment casting processes
Sarojrani Pattnaik et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2014)
An optimization approach for components built by fused deposition modeling with parametric internal structures
L. Villalpando et al.
VARIETY MANAGEMENT IN MANUFACTURING: PROCEEDINGS OF THE 47TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS (2014)
Surface roughness prediction in fused deposition modelling by neural networks
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Dimensional accuracy improvement of FDM square cross-section parts using artificial neural networks and an optimization algorithm
A. Noriega et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Microremoval modeling of surface roughness in barrel finishing
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices
Eric J. McCullough et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
3D roughness profile model in fused deposition modelling
Alberto Boschetto et al.
RAPID PROTOTYPING JOURNAL (2013)
Feasibility Study of manufacturing using rapid prototyping: FDM Approach
Pranjal Jain et al.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013) (2013)
Modelling micro geometrical profiles in fused deposition process
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Bayesian regularization-based Levenberg-Marquardt neural model combined with BFOA for improving surface finish of FDM processed part
S. S. Mahapatra et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Quantification of surface roughness of parts processed by laminated object manufacturing
Daekeon Ahn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Modeling and evaluation of curved layer fused deposition
Sarat Singamneni et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Thickening of surfaces for direct additive manufacturing fabrication
Manlio Bordoni et al.
RAPID PROTOTYPING JOURNAL (2012)
Description and Modeling of the Additive Manufacturing Technology for Aerodynamic Coefficients Measurement
Saeed Daneshmand et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2012)
Methods of Improving Part Accuracy During Rapid Prototyping
Anhua Peng
FRONTIERS OF ADVANCED MATERIALS AND ENGINEERING TECHNOLOGY, PTS 1-3 (2012)
Studies on profile error and extruding aperture for the RP parts using the fused deposition modeling process
Dar-Yuan Chang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Quantitative analysis of a chemical treatment to reduce roughness of parts fabricated using fused deposition modeling
L. M. Galantucci et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Parametric appraisal of fused deposition modelling process using the grey Taguchi method
A. K. Sood et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2010)
The effect of chromium coating in RP technology for airfoil manufacturing
S. Daneshmand et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2010)
INTRICATE SHAPE PROTOTYPES OBTAINED BY FDM
A. Boschetto et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
Analysis on fused deposition modelling performance
Nur Saaidah Abu Bakar et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2010)
Experimental study aiming to enhance the surface finish of fused deposition modeled parts
L. M. Galantucci et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Surface roughness prediction using measured data and interpolation in layered manufacturing
Daekeon Ahn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Representation of surface roughness in fused deposition modeling
Daekeon Ahn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Local-genetic slicing of point clouds for rapid prototyping
G. Percoco et al.
RAPID PROTOTYPING JOURNAL (2008)
Part deposition orientation studies in layered manufacturing
P. M. Pandey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Fabrication direction optimization to minimize post-machining in layered manufacturing
Daekeon Ahn et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Optimizing the rapid prototyping process by integrating the Taguchi method with the Gray relational analysis
Che Chung Wang et al.
RAPID PROTOTYPING JOURNAL (2007)
Using abrasive flow machining to seal and finish conformal channels in laminated tooling
Robert E. Williams et al.
RAPID PROTOTYPING JOURNAL (2007)
Fused deposition modelling using direct extrusion
B. V. Reddy et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2007)
Determination of optimal build direction in rapid prototyping with variable slicing
HS Byun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Determination of the optimal build direction for different rapid prototyping processes using multi-criterion decision making
HS Byun et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2006)
The use of rapid prototyping to assist medical applications
I Gibson et al.
RAPID PROTOTYPING JOURNAL (2006)
Assessment of surface quality on textured FDM prototypes
A Armillotta
RAPID PROTOTYPING JOURNAL (2006)
Determination of the optimal part orientation in layered manufacturing using a genetic algorithm
HS Byun et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2005)
Determination of fabrication direction to minimize post-machining in FDM by prediction of non-linear roughness characteristics
DK Ahn et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2005)
Controlling surface roughness in vapor-deposited poly(amic acid) films by solvent-vapor exposure
M Anthamatten et al.
LANGMUIR (2004)
Fused deposition models from CT scans
JR Meakin et al.
BRITISH JOURNAL OF RADIOLOGY (2004)
Effects of electroplating on the mechanical properties of stereolithography and laser sintered parts
N Saleh et al.
RAPID PROTOTYPING JOURNAL (2004)
Development of translucent FDM parts by post-processing
SH Ahn et al.
RAPID PROTOTYPING JOURNAL (2004)
Optimal part deposition orientation in FDM by using a multicriteria genetic algorithm
PM Pandey et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2004)
Optimum part deposition orientation in fused deposition modeling
K Thrimurthulu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Improvement of surface finish by staircase machining in fused deposition modeling
PM Pandey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Slicing procedures in layered manufacturing: a review
PM Pandey et al.
RAPID PROTOTYPING JOURNAL (2003)
Mechanical characterization of parts fabricated using fused deposition modeling
A Bellini et al.
RAPID PROTOTYPING JOURNAL (2003)
The rapid prototyping technologies
S Upcraft et al.
ASSEMBLY AUTOMATION (2003)
Real time adaptive slicing for fused deposition modelling
PM Pandey et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Surface roughness visualisation for rapid prototyping models
RI Campbell et al.
COMPUTER-AIDED DESIGN (2002)
Analysis of the surface roughness and dimensional accuracy capability of fused deposition modelling processes
CJL Pérez
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2002)
A volumetric approach to part-build orientations in rapid prototyping
W Rattanawong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Computer aided decision support for fused deposition modeling
CW Ziemian et al.
RAPID PROTOTYPING JOURNAL (2001)
Share Paper
