Related references
Note: Only part of the references are listed.Optimization of machining parameters during micro-milling of Ti6Al4V titanium alloy and Inconel 718 materials using Taguchi method
Emel Kuram et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Statistical analysis of process parameters in micromachining of Ti-6Al-4V alloy
Syed H. Imran Jaffery et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Micro-machinability of injection molded polyamide 6 polymer and glass-fiber reinforced polyamide 6 composite
Emel Kuram
COMPOSITES PART B-ENGINEERING (2016)
Thrust Force Analysis in Drilling Glass Fiber Reinforced/Polypropylene (GFR/PP) Composites
K. Palanikumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Fundamental Investigations Into Burr Formation and Damage Mechanisms in the Micro-Milling of a Biomedical Grade Polymer
Paul Ervine et al.
MACHINING SCIENCE AND TECHNOLOGY (2015)
Cutting forces and tool failure in high-speed milling of titanium alloy TC21 with coated carbide tools
Hongxia Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
An experimental study of micromilling parameters to manufacture microchannels on a PMMA substrate
Pin-Chuan Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
An experimental investigation on micro-milling of polymethyl methacrylate components with nanometric surface roughness
Feifei Jiao et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
A comparison between whisker-reinforced alumina and SiAlON ceramic tools in high-speed face milling of Inconel 718
Xianhua Tian et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
Investigations on the drilling process of unreinforced and reinforced polyamides using Taguchi method
Juan Carlos Campos Rubio et al.
COMPOSITES PART B-ENGINEERING (2013)
Tool wear prediction models during end milling of glass fibre-reinforced polymer composites
A. I. Azmi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Machinability study of glass fibre-reinforced polymer composites during end milling
A. I. Azmi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
An investigation of the machinability of PA 6/nano-CaCO3 composite
Reza Farshbaf Zinati et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Investigating the effects of recycling number and injection parameters on the mechanical properties of glass-fibre reinforced nylon 6 using Taguchi method
Emel Kuram et al.
MATERIALS & DESIGN (2013)
Surface roughness analysis in high-speed drilling of unreinforced and reinforced polyamides
V. N. Gaitonde et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Experimental Study of Machinability of GFRP Composites by End Milling
A. I. Azmi et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
Analysis of Micro Burr Formation in Austenitic Stainless Steel X5CrNi18-10
D. Biermann et al.
45TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS 2012 (2012)
Experimental investigation and optimisation in drilling of GFRP composites
K. Palanikumar
MEASUREMENT (2011)
Characterization and modeling of burr formation in micro-end milling
Ravi Lekkala et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2011)
Modeling and Analysis of Machinability Characteristics in PA6 and PA66 GF30 Polyamides through Artificial Neural Network
V. N. Gaitonde et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2010)
Machinability Evaluation in Unreinforced and Reinforced PEEK Composites using Response Surface Models
J. Paulo Davim et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2010)
Modeling and Analysis of Delamination Factor and Surface Roughness in Drilling GFRP Composites
K. Palanikumar
MATERIALS AND MANUFACTURING PROCESSES (2010)
Study on Some Aspects of Machinability in Unreinforced and Reinforced Polyamides
V. N. Gaitonde et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Machinability study on precision turning of PA66 polyamide with and without glass fiber reinforcing
J. Paulo Davim et al.
MATERIALS & DESIGN (2009)
Micromachining of coarse-grained multi-phase material
A. J. Mian et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2009)
Optimum damage and surface roughness prediction in end milling glass fibre-reinforced plastics, using neural network and genetic algorithm
M. R. Razfar et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2009)
Evaluation of machinability in the micro end milling of printed circuit boards
J-B Park et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2009)
Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor
J. Campos Rubio et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites
V. N. Gaitonde et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Taguchi approach for achieving better machinability in unreinforced and reinforced polyamides
V. N. Gaitonde et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2008)
The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite
A. M. Abrao et al.
MATERIALS & DESIGN (2008)
Evaluation of Delamination in Drilling GFRP Composites
K. Palanikumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
Surface roughness prediction model for CNC machining of polypropylene
V. G. Dhokia et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling
K. Palanikumar
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates
J. Paulo Davim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Micro-mechanical modeling of machining of FRP composites - Cutting force analysis
G. Venu Gopala Rao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Mathematical model to predict tool wear on the machining of glass fibre reinforced plastic composites
K. Palanikumar et al.
MATERIALS & DESIGN (2007)
A comparative evaluation of the turning of reinforced and unreinforced polyamide
J. Paulo Davim et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Mechanical and machining characteristics of GF/PP and GF/Polyester composites
R. Varatharajan et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2006)
Small-hole drilling in engineering plastics sheet and its accuracy estimation
H Endo et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer composites
K. Palanikumar et al.
MATERIALS & DESIGN (2006)
Physical cutting model of Polyetheretherketone composites
J. P. Davim et al.
MATERIALS & DESIGN (2006)
Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments
JP Davim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Machinability study on composite (polyetheretherketone reinforced with 30% glass fibre-PEEK GF 30) using polycrystalline diamond (PCD) and cemented carbide (K20) tools
JP Davim et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2004)
Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis
P Davim et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2004)
Share Paper
