Related references
Note: Only part of the references are listed.Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing
Caroline A. Murphy et al.
POLYMER COMPOSITES (2018)
Effect of nanoparticles on the mechanical properties of acrylonitrile-butadiene-styrene specimens fabricated by fused deposition modeling
Shuna Meng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene
Lu Wang et al.
POLYMER (2017)
Investigation of the mechanism and effectiveness of cationic polymer as a compatibilizer in microfibrillated cellulose-reinforced polyolefins
Katsuhito Suzuki et al.
CELLULOSE (2016)
Cellulose NANOFIBER-polyethylene nanocomposites modified by polyvinyl alcohol
Alper Kiziltas et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Ionic Compatibilization of Cellulose Nanocrystals with Quaternary Ammonium Salt and Their Melt Extrusion with Polypropylene
Malladi Nagalakshmaiah et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Shear rheology of polylactide (PLA)-cellulose nanocrystal (CNC) nanocomposites
Davood Bagheriasl et al.
CELLULOSE (2016)
Rheological properties of cellulose nanocrystal-embedded polymer composites: a review
Yern Chee Ching et al.
CELLULOSE (2016)
Conductive polyolefin-rubber nanocomposites with carbon nanotubes
Fugen Daver et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite
Zhenzhen Quan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
In-situ modification of cellulose nanofibrils by organosilanes during spray drying
Lu Wang et al.
INDUSTRIAL CROPS AND PRODUCTS (2016)
Investigations for melt flow index of Nylon6-Fe composite based hybrid FDM filament
Harish Garg et al.
RAPID PROTOTYPING JOURNAL (2016)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
Zixiang Weng et al.
MATERIALS & DESIGN (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
A. Le Duigou et al.
MATERIALS & DESIGN (2016)
Maleic anhydride polypropylene modified cellulose nanofibril polypropylene nanocomposites with enhanced impact strength
Yucheng Peng et al.
POLYMER COMPOSITES (2016)
Experimental investigations on fused deposition modelling of polymer-layered silicate nanocomposite
Vishal Francis et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
Polypropylene reinforced with nanocrystalline cellulose: Coupling agent optimization
Hojjat Mahi Hassanabadi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Cellulose Nanocomposites
Dorel Feldman
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Wood-Plastic Composite Technology
Douglas J. Gardner et al.
CURRENT FORESTRY REPORTS (2015)
Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
Seyeon Hwang et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Effect of Cellulose Nanocrystals (CNC) Particle Morphology on Dispersion and Rheological and Mechanical Properties of Polypropylene/CNC Nanocomposites
Vahid Khoshkava et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Polyamide 6-Cellulose Composites: Effect of Cellulose Composition on Melt Rheology and Crystallization Behavior
Alper Kiziltas et al.
POLYMER ENGINEERING AND SCIENCE (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Cellulose reinforced polymer composites and nanocomposites: a critical review
Chuanwei Miao et al.
CELLULOSE (2013)
Validity of the modified molecular stress function theory to predict the rheological properties of polymer nanocomposites
Hojjat Mahi Hassanabadi et al.
JOURNAL OF RHEOLOGY (2013)
Additive manufacturing (AM) and nanotechnology: promises and challenges
Olga Ivanova et al.
RAPID PROTOTYPING JOURNAL (2013)
Multiple material additive manufacturing - Part 1: a review This review paper covers a decade of research on multiple material additive manufacturing technologies which can produce complex geometry parts with different materials
Mohammad Vaezi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2013)
Drying cellulose nanofibrils: in search of a suitable method
Yucheng Peng et al.
CELLULOSE (2012)
Investigation of shear thinning behavior and microstructures of MWCNT/epoxy and CNF/epoxy suspensions under steady shear conditions
Tomohiro Yokozeki et al.
EUROPEAN POLYMER JOURNAL (2012)
Suitability of PLA/TCP for fused deposition modeling
Dietmar Drummer et al.
RAPID PROTOTYPING JOURNAL (2012)
Cellulose nanomaterials review: structure, properties and nanocomposites
Robert J. Moon et al.
CHEMICAL SOCIETY REVIEWS (2011)
Rheological behavior of original and recycled cellulose-polyolefin composite materials
C. Gonzalez-Sanchez et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Transient shear rheology of carbon nanofiber/polystyrene melt composites
Christopher Kagarise et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2010)
Optically Transparent Nanofiber Paper
Masaya Nogi et al.
ADVANCED MATERIALS (2009)
Rheological Properties of Polypropylene/Hemp Fiber Composites
Eddy Twite-Kabamba et al.
POLYMER COMPOSITES (2009)
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites
Shao-Yun Fu et al.
COMPOSITES PART B-ENGINEERING (2008)
Melt rheology of polypropylene reinforced with polyaniline-coated short glass fibers
Maria Eugenia Romero-Guzman et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Additive Processing of Polymers
Bettina Wendel et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2008)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Effect of rotational speed of twin screw extruder on the microstructure and rheological and mechanical properties of nanoclay-reinforced polypropylene nanocomposites
Piia Peltola et al.
POLYMER ENGINEERING AND SCIENCE (2006)
Nanofiber-reinforced polymers prepared by fused deposition modeling
ML Shofner et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Short fiber reinforced composites for fused deposition modeling
WH Zhong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)