Related references
Note: Only part of the references are listed.Formation of metastable cellular microstructures in selective laser melted alloys
K. G. Prashanth et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
Suihe Jiang et al.
NATURE (2017)
Bone-like crack resistance in hierarchical metastable nanolaminate steels
Motomichi Koyama et al.
SCIENCE (2017)
Microstructure and strength of selectively laser melted AlSi10Mg
J. Wu et al.
ACTA MATERIALIA (2016)
Normalised model-based processing diagrams for additive layer manufacture of engineering alloys
Meurig Thomas et al.
ACTA MATERIALIA (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
Jason R. Trelewicz et al.
JOM (2016)
Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
Yuan Zhong et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Todd M. Mower et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Multiprocess 3D printing for increasing component functionality
Eric MacDonald et al.
SCIENCE (2016)
Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts
Di Wang et al.
MATERIALS & DESIGN (2016)
Selective laser melting of stainless steel 316L with low porosity and high build rates
Zhongji Sun et al.
MATERIALS & DESIGN (2016)
Gradient plasticity in gradient nano-grained metals
Zhi Zeng et al.
EXTREME MECHANICS LETTERS (2016)
Hardened austenite steel with columnar sub-grain structure formed by laser melting
K. Saeidi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
Sang-Heon Kim et al.
NATURE (2015)
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Xiaolei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Austenitic stainless steel strengthened by the in situ formation of oxide nanoinclusions
Kamran Saeidi et al.
RSC ADVANCES (2015)
Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
B. Vrancken et al.
ACTA MATERIALIA (2014)
Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W
Chandrika Kamath et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
Wayne E. King et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers
Milton Sergio Fernandes de Lima et al.
MATERIALS & DESIGN (2014)
Characterization of stainless steel parts by Laser Metal Deposition Shaping
Kai Zhang et al.
MATERIALS & DESIGN (2014)
Advances in the Hopkinson bar testing of irradiated/non-irradiated nuclear materials and large specimens
Carlo Albertini et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2014)
Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures
A. Mertens et al.
POWDER METALLURGY (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
Defective twin boundaries in nanotwinned metals
Y. Morris Wang et al.
NATURE MATERIALS (2013)
Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium
Dongdong Gu et al.
ACTA MATERIALIA (2012)
Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles
F. K. Yan et al.
ACTA MATERIALIA (2012)
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
K. N. Amato et al.
ACTA MATERIALIA (2012)
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Lawrence E. Murr et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Controlling factors in tensile deformation of nanocrystalline cobalt and nickel
Y. M. Wang et al.
PHYSICAL REVIEW B (2012)
Strengthening austenitic steels by using nanotwinned austenitic grains
K. Lu et al.
SCRIPTA MATERIALIA (2012)
Enhanced fatigue properties of nanostructured austenitic SUS 316L stainless steel
H. Ueno et al.
ACTA MATERIALIA (2011)
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
R. Quey et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)
Formation of ultrafine grained microstructure in the austenitic stainless steel and its impact on tensile properties
B. Ravi Kumar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper
T. H. Fang et al.
SCIENCE (2011)
Study of mechanical properties of AISI 316 stainless steel processed by selective laser melting, following different manufacturing strategies
Itziar Tolosa et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
316L Austenite Stainless Steels Strengthened by Means of Nano-scale Twins
G. Z. Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2010)
Deformation mechanisms of twinning-induced plasticity steels: In situ synchrotron characterization and modeling
Kun Yan et al.
SCRIPTA MATERIALIA (2010)
Designing metallic glass matrix composites with high toughness and tensile ductility
Douglas C. Hofmann et al.
NATURE (2008)
Strain rate sensitivity of nanocrystalline and ultrafine-grained steel obtained by mechanical attrition
R. Rodriguez-Baracaldo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Inverse temperature dependence of toughness in an ultrafine grain-structure steel
Yuuji Kimura et al.
SCIENCE (2008)
Effect of partial solution nitriding on mechanical properties and corrosion resistance in a type 316L austenitic stainless steel plate
Tomonori Nakanishi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Creep-resistant, Al2O3-forming austenitic stainless steels
Y. Yamamoto et al.
SCIENCE (2007)
Deformation-induced long-range internal stresses and lattice plane misorientations and the role of geometrically necessary dislocations
H. Mughrabi
PHILOSOPHICAL MAGAZINE (2006)
Grain-boundary relaxation and its effect on plasticity in nanocrystalline Fe
D. Jang et al.
JOURNAL OF APPLIED PHYSICS (2006)
Jamming transition in emulsions and granular materials
HP Zhang et al.
PHYSICAL REVIEW E (2005)
Tensile properties of a nanocrystalline 316L austenitic stainless steel
XH Chen et al.
SCRIPTA MATERIALIA (2005)
In situ neutron diffraction during tensile deformation of a ferrite-cementite steel
Y Tomota et al.
ACTA MATERIALIA (2003)
High tensile ductility in a nanostructured metal
YM Wang et al.
NATURE (2002)
Granular flow down an inclined plane: Bagnold scaling and rheology
LE Silbert et al.
PHYSICAL REVIEW E (2001)