Related references
Note: Only part of the references are listed.All-Printed, Stretchable Zn-Ag2O Rechargeable Battery via Hyperelastic Binder for Self-Powering Wearable Electronics
Rajan Kumar et al.
ADVANCED ENERGY MATERIALS (2017)
Printed Transparent Thin Film Zn-MnO2 Battery
Woranunt Lao-atiman et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Inkjet printing of polymer functionalized CNT gas sensor with enhanced sensing properties
Abdullah S. Alshammari et al.
MATERIALS LETTERS (2017)
On Maxwell's displacement current for energy and sensors: the origin of nanogenerators
Zhong Lin Wang
MATERIALS TODAY (2017)
All-printed strain sensors: Building blocks of the aircraft structural health monitoring system
Yuzheng Zhang et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
Lightweight conductive graphene/thermoplastic polyurethane foams with ultrahigh compressibility for piezoresistive sensing
Hu Liu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Mass-producible 2D-MoSe2 bulk modified screen-printed electrodes provide significant electrocatalytic performances towards the hydrogen evolution reaction
Samuel J. Rowley-Neale et al.
SUSTAINABLE ENERGY & FUELS (2017)
A stretchable and screen-printed electrochemical sensor for glucose determination in human perspiration
A. Abellan-Llobregat et al.
BIOSENSORS & BIOELECTRONICS (2017)
Full densification of inkjet-printed copper conductive tracks on a flexible substrate utilizing a hydrogen plasma sintering
Young-Tae Kwon et al.
APPLIED SURFACE SCIENCE (2017)
Fully Printed and Encapsulated SWCNT-Based Thin Film Transistors via a Combination of R2R Gravure and Inkjet Printing
Christa M. Homenick et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Hybrid Copper-Silver Conductive Tracks for Enhanced Oxidation Resistance under Flash Light Sintering
Changyong Yim et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Fully Printed Ultraflexible Supercapacitor Supported by a Single-Textile Substrate
Huihui Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Fully Screen-Printed, Large-Area, and Flexible Active-Matrix Electrochromic Displays Using Carbon Nanotube Thin-Film Transistors
Xuan Cao et al.
ACS NANO (2016)
Inkjet Printing of a Highly Loaded Palladium Ink for Integrated, Low-Cost pH Sensors
Yiheng Qin et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Polyfluorinated Electrolyte for Fully Printed Carbon Nanotube Electronics
Huaping Li et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Recent Advances in Flexible and Stretchable Bio-Electronic Devices Integrated with Nanomaterials
Suji Choi et al.
ADVANCED MATERIALS (2016)
Flexible Nanogenerators for Energy Harvesting and Self-Powered Electronics
Feng Ru Fan et al.
ADVANCED MATERIALS (2016)
2D-Crystal-Based Functional Inks
Francesco Bonaccorso et al.
ADVANCED MATERIALS (2016)
All-printed capacitors from graphene-BN-graphene nanosheet heterostructures
Adam G. Kelly et al.
APPLIED PHYSICS LETTERS (2016)
All-solid-state micro-supercapacitors based on inkjet printed graphene electrodes
Jiantong Li et al.
APPLIED PHYSICS LETTERS (2016)
Conductive-on-demand: Tailorable polyimide/carbon nanotube nanocomposite thin film by dual-material aerosol jet printing
Kan Wang et al.
CARBON (2016)
Silver-ethanolamine-formate complex based transparent and stable ink: Electrical assessment with microwave plasma vs thermal sintering
Mohammad Vaseem et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Synthesis of Ag/RGO composite as effective conductive ink filler for flexible inkjet printing electronics
Weijun Zhang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2016)
11.3% efficiency Cu(In,Ga)(S,Se)2 thin film solar cells via drop-on-demand inkjet printing
Xianzhong Lin et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
All-inkjet-printed, solid-state flexible supercapacitors on paper
Keun-Ho Choi et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
High performance screen-printed electrodes prepared by a green solvent approach for lithium-ion batteries
A. Goren et al.
JOURNAL OF POWER SOURCES (2016)
Development of a High Energy Density Flexible Zinc-Air Battery
Sira Suren et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices
E. M. Hamad et al.
LAB ON A CHIP (2016)
All-Printed Differential Temperature Sensor for the Compensation of Bending Effects
Shawkat Ali et al.
LANGMUIR (2016)
Recent advances in printed sensors on foil
Giorgio Mattana et al.
MATERIALS TODAY (2016)
3D nanostructured inkjet printed graphene via UV-pulsed laser irradiation enables paper-based electronics and electrochemical devices
Suprem R. Das et al.
NANOSCALE (2016)
Sub-second carbon-nanotube-mediated microwave sintering for high-conductivity silver patterns on plastic substrates
Sunshin Jung et al.
NANOSCALE (2016)
Shape control of inorganic nanoparticles from solution
Zhaohui Wu et al.
NANOSCALE (2016)
Electrically conductive strain sensing polyurethane nanocomposites with synergistic carbon nanotubes and graphene bifillers
Hu Liu et al.
NANOSCALE (2016)
Preparing of Highly Conductive Patterns on Flexible Substrates by Screen Printing of Silver Nanoparticles with Different Size Distribution
Jin Ding et al.
NANOSCALE RESEARCH LETTERS (2016)
Electrohydrodynamic printing for scalable MoS2 flake coating: application to gas sensing device
Sooman Lim et al.
NANOTECHNOLOGY (2016)
Rapid laser sintering of metal nanoparticles inks
Oleg Ermak et al.
NANOTECHNOLOGY (2016)
Print flexible solar cells
Yi-Bing Cheng et al.
NATURE (2016)
Disposable, Paper-Based, Inkjet-Printed Humidity and H2S Gas Sensor for Passive Sensing Applications
Abdul Quddious et al.
SENSORS (2016)
Fully inkjet printed SnO2 gas sensor on plastic substrate
Mathilde Rieu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2016)
Inkjet printed multiwall carbon nanotube electrodes for dielectric elastomer actuators
Curdin Baechler et al.
SMART MATERIALS AND STRUCTURES (2016)
Resistive Switching in All-Printed, Flexible and Hybrid MoS2-PVA Nanocomposite based Memristive Device Fabricated by Reverse Offset
Muhammad Muqeet Rehman et al.
SCIENTIFIC REPORTS (2016)
Wetting properties and SERS applications of ZnO/Ag nanowire arrays patterned by a screen printing method
Shuyuan Cui et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Electrically conductive thermoplastic elastomer nanocomposites at ultralow graphene loading levels for strain sensor applications
Hu Liu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Large-scale synthesis and screen printing of upconversion hexagonal-phase NaYF4:Yb3+,Tm3+/Er3+/Eu3+ plates for security applications
Weijing Yao et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Graphene and the related conductive inks for flexible electronics
Wendong Yang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Preparing of Highly Conductive Patterns on Flexible Substrates by Screen Printing of Silver Nanoparticles with Different Size Distribution
Jin Ding et al.
NANOSCALE RESEARCH LETTERS (2016)
Large Scale Triboelectric Nanogenerator and Self-Powered Pressure Sensor Array Using Low Cost Roll-to-Roll UV Embossing
Lokesh Dhakar et al.
SCIENTIFIC REPORTS (2016)
All-photonic drying and sintering process via flash white light combined with deep-UV and near-infrared irradiation for highly conductive copper nano-ink
Hyun-Jun Hwang et al.
SCIENTIFIC REPORTS (2016)
Highly reliable wind-rolling triboelectric nanogenerator operating in a wide wind speed range
Hyungseok Yong et al.
SCIENTIFIC REPORTS (2016)
Fast sintering of silver nanoparticle and flake layers by infrared module assistance in large area roll-to-roll gravure printing system
Janghoon Park et al.
SCIENTIFIC REPORTS (2016)
A flexible triboelectric-piezoelectric hybrid nanogenerator based on P(VDF-TrFE) nanofibers and PDMS/MWCNT for wearable devices
Xingzhao Wang et al.
SCIENTIFIC REPORTS (2016)
Multi-LeapMotion sensor based demonstration for robotic refine tabletop object manipulation task
Haiyang Jin et al.
CAAI TRANSACTIONS ON INTELLIGENCE TECHNOLOGY (2016)
All-Printed Transistors on Nano Cellulose Substrate
Tomi Hassinen et al.
MRS ADVANCES (2016)
Inkjet Printing of Silver Nanowire Networks
David J. Finn et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Fully Printed Foldable Integrated Logic Gates with Tunable Performance Using Semiconducting Carbon Nanotubes
Le Cai et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells
Kyeongil Hwang et al.
ADVANCED MATERIALS (2015)
Nanomaterial-Enabled Stretchable Conductors: Strategies, Materials and Devices
Shanshan Yao et al.
ADVANCED MATERIALS (2015)
Annealed graphene sheets decorated with silver nanoparticles for inkjet printing
Gongkai Wang et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Advances and Future Challenges in Printed Batteries
Ricardo E. Sousa et al.
CHEMSUSCHEM (2015)
Printed electrodes for flexible, light-weight solid-state supercapacitors - a feasibility study
Jagdeep S. Sagu et al.
CIRCUIT WORLD (2015)
Multi-material additive manufacturing of embedded low-profile antennas
P. Pa et al.
ELECTRONICS LETTERS (2015)
Thermal conductivity estimation of inkjet-printed silver nanoparticle ink during continuous wave laser sintering
Jung Hyun Choi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Roll-printed wrinkled electrode for use in a triboelectric generator
Daewoong Hong et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2015)
Emerging Carbon and Post-Carbon Nanomaterial Inks for Printed Electronics
Ethan B. Secor et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Tetragonal hematite single crystals as anode materials for high performance lithium ion batteries
Shuanglei Yang et al.
JOURNAL OF POWER SOURCES (2015)
High-Resolution Patterns of Quantum Dots Formed by Electrohydrodynamic Jet Printing for Light-Emitting Diodes
Bong Hoon Kim et al.
NANO LETTERS (2015)
Printable Solid-State Lithium-Ion Batteries: A New Route toward Shape-Conformable Power Sources with Aesthetic Versatility for Flexible Electronics
Se-Hee Kim et al.
NANO LETTERS (2015)
Mechanisms, Capabilities, and Applications of High-Resolution Electrohydrodynamic Jet Printing
M. Serdar Onses et al.
SMALL (2015)
Bimodally dispersed silver paste for the metallization of a crystalline silicon solar cell using electrohydrodynamic jet printing
Dong-Youn Shin et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Upscaling of Perovskite Solar Cells: Fully Ambient Roll Processing of Flexible Perovskite Solar Cells with Printed Back Electrodes
Thomas M. Schmidt et al.
ADVANCED ENERGY MATERIALS (2015)
Electrostatic-Force-Assisted Dispensing Printing to Construct High-Aspect-Ratio of 0.79 Electrodes on a Textured Surface with Improved Adhesion and Contact Resistivity
Dong-Youn Shin et al.
SCIENTIFIC REPORTS (2015)
Scalability of carbon-nanotube-based thin film transistors for flexible electronic devices manufactured using an all roll-to-roll gravure printing system
Hyunmo Koo et al.
SCIENTIFIC REPORTS (2015)
On the self-damping nature of densification in photonic sintering of nanoparticles
William MacNeill et al.
SCIENTIFIC REPORTS (2015)
Inkjet Printed Conductive Tracks for Printed Electronics
S. -P. Chen et al.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2015)
All-solid-state flexible supercapacitors by fast laser annealing of printed metal nanoparticle layers
Habeom Lee et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Flexible copper wires through galvanic replacement of zinc paste: a highly cost-effective technology for wiring flexible printed circuits
Jingping Liu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
Roll-to-roll infrared (IR) drying and sintering of an inkjet-printed silver nanoparticle ink within 1 second
Enrico Sowade et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
High performance dye-sensitized solar cells with inkjet printed ionic-liquid electrolyte
Syed Ghufran Hashmi et al.
NANO ENERGY (2015)
Electrohydrodynamically Printed, Flexible Energy Harvester Using In Situ Poled Piezoelectric Nanofibers
Yajing Ding et al.
ENERGY TECHNOLOGY (2015)
Recent Progress on Printed Flexible Batteries: Mechanical Challenges, Printing Technologies, and Future Prospects
Abhinav M. Gaikwad et al.
ENERGY TECHNOLOGY (2015)
Inkjet-Printed Cu2ZnSn(S, Se)4 Solar Cells
Xianzhong Lin et al.
ADVANCED SCIENCE (2015)
Recent Progress in Electronic Skin
Xiandi Wang et al.
ADVANCED SCIENCE (2015)
A High Areal Capacity Flexible Lithium-Ion Battery with a Strain-Compliant Design
Abhinav M. Gaikwad et al.
ADVANCED ENERGY MATERIALS (2015)
Comparison of laser and intense pulsed light sintering (IPL) for inkjet-printed copper nanoparticle layers
Juha Niittynen et al.
SCIENTIFIC REPORTS (2015)
Low-Cost, Disposable, Flexible and Highly Reproducible Screen Printed SERS Substrates for the Detection of Various Chemicals
Wei Wu et al.
SCIENTIFIC REPORTS (2015)
Anion-mediated synthesis of monodisperse silver nanoparticles useful for screen printing of high-conductivity patterns on flexible substrates for printed electronics
Li Liu et al.
RSC ADVANCES (2015)
Fully Printed Flexible Fingerprint-like Three-Axis Tactile and Slip Force and Temperature Sensors for Artificial Skin
Shingo Harada et al.
ACS NANO (2014)
Fully Printed, Highly Sensitive Multifunctional Artificial Electronic Whisker Arrays Integrated with Strain and Temperature Sensors
Shingo Harada et al.
ACS NANO (2014)
Screen Printing as a Scalable and Low-Cost Approach for Rigid and Flexible Thin-Film Transistors Using Separated Carbon Nanotubes
Xuan Cao et al.
ACS NANO (2014)
Inkjet Printing of MoS2
Jiantong Li et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Aerosol Jet Printed, Sub-2 V Complementary Circuits Constructed from P- and N-Type Electrolyte Gated Transistors
Kihyon Hong et al.
ADVANCED MATERIALS (2014)
A review on amperometric-type immunosensors based on screen-printed electrodes
Kalyan Kumar Mistry et al.
ANALYST (2014)
In Situ Synthesis of Self-Assembled Gold Nanoparticles on Glass or Silicon Substrates through Reactive Inkjet Printing
Mutalifu Abulikemu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
Inkjet printed ambipolar transistors and inverters based on carbon nanotube/zinc tin oxide heterostructures
Bongjun Kim et al.
APPLIED PHYSICS LETTERS (2014)
Direct transparent electrode patterning on layered GaN substrate by screen printing of indium tin oxide nanoparticle ink for Eu-doped GaN red light-emitting diode
Y. Kashiwagi et al.
APPLIED PHYSICS LETTERS (2014)
Paper-based batteries: A review
Thu H. Nguyen et al.
BIOSENSORS & BIOELECTRONICS (2014)
Inkjet-Printed Flexible Graphene-Based Supercapacitor
Matthew H. Ervin et al.
ELECTROCHIMICA ACTA (2014)
A wearable thermoelectric generator fabricated on a glass fabric
Sun Jin Kim et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Triboelectric nanogenerators as new energy technology and self-powered sensors - Principles, problems and perspectives
Zhong Lin Wang
FARADAY DISCUSSIONS (2014)
Metal Electrode Work Function Modification Using Aerosol Jet Printing
Roberto Aga et al.
IEEE ELECTRON DEVICE LETTERS (2014)
Flexible Fibrous Piezoelectric Sensors on Printed Silver Electrodes
Ho Yeon Son et al.
IEEE TRANSACTIONS ON NANOTECHNOLOGY (2014)
Near Infrared Radiation as a Rapid Heating Technique for TiO2 Films on Glass Mounted Dye-Sensitized Solar Cells
Katherine Hooper et al.
INTERNATIONAL JOURNAL OF PHOTOENERGY (2014)
Influence of spark plasma sintering parameters on densification and mechanical properties of boron carbide
K. Sairam et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Device characteristics of inkjet-printed ZnO TFTs by solution process
Sang Chul Lim et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2014)
Fabrication, characterization and screen printing of conductive ink based on carbon@Ag core-shell nanoparticles
Wei Wu et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2014)
Metal-mesh based transparent electrode on a 3-D curved surface by electrohydrodynamic jet printing
Baekhoon Seong et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2014)
Laser sintering of copper nanoparticles
Michael Zenou et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
Printed environmentally friendly supercapacitors with ionic liquid electrolytes on paper
F. Pettersson et al.
JOURNAL OF POWER SOURCES (2014)
Development of MnO2 cathode inks for flexographically printed rechargeable zinc-based battery
Zuoqian Wang et al.
JOURNAL OF POWER SOURCES (2014)
Flexible supercapacitor fabrication by room temperature rapid laser processing of roll-to-roll printed metal nanoparticle ink for wearable electronics application
Junyeob Yeo et al.
JOURNAL OF POWER SOURCES (2014)
Impact of microwave sintering on dielectric properties of screen printed Ba0.6Sr0.4TiO3 thick films
Florian Paul et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Preparation of the working electrode of dye-sensitized solar cells: Effects of screen printing parameters
Hsiu-Po Kuo et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2014)
High-Speed, Inkjet-Printed Carbon Nanotube/Zinc Tin Oxide Hybrid Complementary Ring Oscillators
Bongjun Kim et al.
NANO LETTERS (2014)
Flexible logic circuits based on top-gate thin film transistors with printed semiconductor carbon nanotubes and top electrodes
Weiwei Xu et al.
NANOSCALE (2014)
Screen-printed electrodes for biosensing: a review (2008-2013)
Zahra Taleat et al.
MICROCHIMICA ACTA (2014)
The fabrication, characterisation and electrochemical investigation of screen-printed graphene electrodes
Edward P. Randviir et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Inkjet printed micropump actuator based on piezoelectric polymers: Device performance and morphology studies
Oliver Pabst et al.
ORGANIC ELECTRONICS (2014)
A novel method to prepare Cu@Ag core-shell nanoparticles for printed flexible electronics
Chang Kyu Kim et al.
POWDER TECHNOLOGY (2014)
All-printed diode operating at 1.6 GHz
Negar Sani et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability
Anyi Mei et al.
SCIENCE (2014)
Where Do Batteries End and Supercapacitors Begin?
Patrice Simon et al.
SCIENCE (2014)
Interface engineering of highly efficient perovskite solar cells
Huanping Zhou et al.
SCIENCE (2014)
A printed H2S sensor with electro-optical response
J. Sarfraz et al.
SENSORS AND ACTUATORS B-CHEMICAL (2014)
Direct Alignment and Patterning of Silver Nanowires by Electrohydrodynamic Jet Printing
Hyungdong Lee et al.
SMALL (2014)
Printed Piezoelectric Energy Harvesting Device
Moazzam Ali et al.
ADVANCED ENERGY MATERIALS (2014)
All-Inkjet-Printed, All-Air-Processed Solar Cells
Sungjune Jung et al.
ADVANCED ENERGY MATERIALS (2014)
Personal electronics printing via tapping mode composite liquid metal ink delivery and adhesion mechanism
Yi Zheng et al.
SCIENTIFIC REPORTS (2014)
Flexible rechargeable lithium ion batteries: advances and challenges in materials and process technologies
Yuhai Hu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
An epidermal alkaline rechargeable Ag-Zn printable tattoo battery for wearable electronics
Sheela Berchmans et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Inkjet-printed highly conductive transparent patterns with water based Ag-doped graphene
Lihong Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Towards single-pass plasma sintering: temperature influence of atmospheric pressure plasma sintering of silver nanoparticle ink
Sebastian Wunscher et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Recent advances in upscalable wet methods and ink formulations for printed electronics
Yana Aleeva et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices
Sebastian Wuenscher et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Inkjet deposition of liquid-exfoliated graphene and MoS2 nanosheets for printed device applications
David J. Finn et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Characteristics of inkjet-printed separators in grapheme-based supercapacitors
Y. S. Yang et al.
SEMICONDUCTORS, DIELECTRICS, AND METALS FOR NANOELECTRONICS 12 (2014)
Enhanced Electrical and Mechanical Properties of Silver Nanoplatelet-Based Conductive Features Direct Printed on a Flexible Substrate
Young-In Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Recent Advances in Organic Transistor Printing Processes
Boseok Kang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines
Ankit Mahajan et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Nonvacuum, Maskless Fabrication of a Flexible Metal Grid Transparent Conductor by Low-Temperature Selective Laser Sintering of Nanoparticle Ink
Sukjoon Hong et al.
ACS NANO (2013)
Highly Transparent Low Resistance ZnO/Ag Nanowire/ZnO Composite Electrode for Thin Film Solar Cells
Areum Kim et al.
ACS NANO (2013)
Comparison of UV-Curing, Hotmelt, and Pressure Sensitive Adhesive as Roll-to-Roll Encapsulation Methods for Polymer Solar Cells
Markus Hosel et al.
ADVANCED ENGINEERING MATERIALS (2013)
Self-Organization of Inkjet-Printed Organic Semiconductor Films Prepared in Inkjet-Etched Microwells
Donghoon Kwak et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Multifunctional Epidermal Electronics Printed Directly Onto the Skin
Woon-Hong Yeo et al.
ADVANCED MATERIALS (2013)
25th Anniversary Article: The Evolution of Electronic Skin (E-Skin): A Brief History, Design Considerations, and Recent Progress
Mallory L. Hammock et al.
ADVANCED MATERIALS (2013)
Wide Linear-Range Detecting Nonenzymatic Glucose Biosensor Based on CuO Nanoparticles Inkjet-Printed on Electrodes
Rafiq Ahmad et al.
ANALYTICAL CHEMISTRY (2013)
All-printed and transparent single walled carbon nanotube thin film transistor devices
Farzam Sajed et al.
APPLIED PHYSICS LETTERS (2013)
A flexible high potential printed battery for powering printed electronics
Abhinav M. Gaikwad et al.
APPLIED PHYSICS LETTERS (2013)
Flexible Complementary Logic Gates Using Inkjet-Printed Polymer Field-Effect Transistors
Kang-Jun Baeg et al.
IEEE ELECTRON DEVICE LETTERS (2013)
Rapid low-pressure plasma sintering of inkjet-printed silver nanoparticles for RFID antennas
Franziska M. Wolf et al.
JOURNAL OF MATERIALS RESEARCH (2013)
Inkjet Printing of High Conductivity, Flexible Graphene Patterns
Ethan B. Secor et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)
All-solid-state lithium ion battery using garnet-type oxide and Li3BO3 solid electrolytes fabricated by screen-printing
Shingo Ohta et al.
JOURNAL OF POWER SOURCES (2013)
Novel Planar-Structure Electrochemical Devices for Highly Flexible Semitransparent Power Generation/Storage Sources
Heng Li et al.
NANO LETTERS (2013)
Fully Printed, High Performance Carbon Nanotube Thin-Film Transistors on Flexible Substrates
Pak Heng Lau et al.
NANO LETTERS (2013)
Scalable, printable, surfactant-free graphene ink directly from graphite
X. Han et al.
NANOTECHNOLOGY (2013)
An ultra-lightweight design for imperceptible plastic electronics
Martin Kaltenbrunner et al.
NATURE (2013)
The characteristics of Cu nanopaste sintered by atmospheric-pressure plasma
Kwang-Seok Kim et al.
MICROELECTRONIC ENGINEERING (2013)
All inkjet-printed piezoelectric polymer actuators: Characterization and applications for micropumps in lab-on-a-chip systems
Oliver Pabst et al.
ORGANIC ELECTRONICS (2013)
Carbon Nanotubes: Present and Future Commercial Applications
Michael F. L. De Volder et al.
SCIENCE (2013)
Development of inkjet printed strain sensors
V. Correia et al.
SMART MATERIALS AND STRUCTURES (2013)
A laboratory scale approach to polymer solar cells using one coating/printing machine, flexible substrates, no ITO, no vacuum and no spincoating
Jon E. Carle et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Electrical sintering characteristics of inkjet-printed conductive Ag lines on a paper substrate
Shin Jang et al.
THIN SOLID FILMS (2013)
Roll-to-Roll Inkjet Printing and Photonic Sintering of Electrodes for ITO Free Polymer Solar Cell Modules and Facile Product Integration
Dechan Angmo et al.
ADVANCED ENERGY MATERIALS (2013)
Screen-Printable Thin Film Supercapacitor Device Utilizing Graphene/Polyaniline Inks
Yanfei Xu et al.
ADVANCED ENERGY MATERIALS (2013)
Strain sensitivity and durability in p-type and n-type organic thin-film transistors with printed silver electrodes
Kenjiro Fukuda et al.
SCIENTIFIC REPORTS (2013)
Flexible asymmetric supercapacitors based on ultrathin two-dimensional nanosheets with outstanding electrochemical performance and aesthetic property
Shan Shi et al.
SCIENTIFIC REPORTS (2013)
Air-stable, surface-oxide free Cu nanoparticles for highly conductive Cu ink and their application to printed graphene transistors
Sunho Jeong et al.
JOURNAL OF MATERIALS CHEMISTRY C (2013)
Highly Sensitive Antenna Using Inkjet Overprinting with Particle-Free Conductive Inks
Natsuki Komoda et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Enhanced Performance of Dispenser Printed MA n-type Bi2Te3 Composite Thermoelectric Generators
Deepa Madan et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Silver Conductive Features on Flexible Substrates from a Thermally Accelerated Chain Reaction at Low Sintering Temperatures
Shih-Pin Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Inkjet-Printed Gold Electrodes on Paper: Characterization and Functionalization
Anni Maattanen et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Inkjet-Printed Graphene Electronics
Felice Torrisi et al.
ACS NANO (2012)
Plasma and Microwave Flash Sintering of a Tailored Silver Nanoparticle Ink, Yielding 60% Bulk Conductivity on Cost- Effective Polymer Foils
Jolke Perelaer et al.
ADVANCED MATERIALS (2012)
All-Solution-Processed Flexible Thin Film Piezoelectric Nanogenerator
Sung Yun Chung et al.
ADVANCED MATERIALS (2012)
Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds
Jolke Perelaer et al.
ADVANCED MATERIALS (2012)
Recent developments and applications of screen-printed electrodes in environmental assays-A review
Meng Li et al.
ANALYTICA CHIMICA ACTA (2012)
Flexible and Stretchable Electronics for Biointegrated Devices
Dae-Hyeong Kim et al.
ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 14 (2012)
Solar cells with one-day energy payback for the factories of the future
Nieves Espinosa et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Fully Gravure-Printed Flexible Full Adder Using SWNT-Based TFTs
Jinsoo Noh et al.
IEEE ELECTRON DEVICE LETTERS (2012)
Fabrication and electrical properties of all-printed carbon nanotube thin film transistors on flexible substrates
Jianwen Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Resistivity transition mechanism of silver salts in the next generation conductive ink for a roll-to-roll printed film with a silver network
Dong-Youn Shin et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Reactive inkjet printing
Patrick J. Smith et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Localized atmospheric plasma sintering of inkjet printed silver nanoparticles
Sebastian Wuenscher et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Characterization and optimization of a printed, primary silver-zinc battery
Kyle T. Braam et al.
JOURNAL OF POWER SOURCES (2012)
Reactive Silver Inks for Patterning High-Conductivity Features at Mild Temperatures
S. Brett Walker et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
In situ monitoring of flash-light sintering of copper nanoparticle ink for printed electronics
Hyun-Jun Hwang et al.
NANOTECHNOLOGY (2012)
Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56 MHz
Hyejin Park et al.
NANOTECHNOLOGY (2012)
The fabrication of front electrodes of Si solar cell by dispensing printing
Do-Hyung Kim et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2012)
Control of valley polarization in monolayer MoS2 by optical helicity
Kin Fai Mak et al.
NATURE NANOTECHNOLOGY (2012)
Impact of metered ink volume on reel-to-reel flexographic printed conductive networks for enhanced thin film conductivity
D. Deganello et al.
THIN SOLID FILMS (2012)
IR-sintering of ink-jet printed metal-nanoparticles on paper
Daniel Tobjork et al.
THIN SOLID FILMS (2012)
Graphene-based wireless bacteria detection on tooth enamel
Manu S. Mannoor et al.
NATURE COMMUNICATIONS (2012)
Conductive Inks with a Built-In Mechanism That Enables Sintering at Room Temperature
Michael Grouchko et al.
ACS NANO (2011)
Highly Flexible, Printed Alkaline Batteries Based on Mesh-Embedded Electrodes
Abhinav M. Gaikwad et al.
ADVANCED MATERIALS (2011)
Silver nanoplates as inkjet ink particles for metallization at a low baking temperature of 100°C
Chien-Liang Lee et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
Printed WORM Memory on a Flexible Substrate Based on Rapid Electrical Sintering of Nanoparticles
Jaakko Leppaniemi et al.
IEEE TRANSACTIONS ON ELECTRON DEVICES (2011)
Reactive Sintering of Copper Nanoparticles Using Intense Pulsed Light for Printed Electronics
Jongeun Ryu et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Formation of conductive silver films via inkjet reaction system
Zhen-Kai Kao et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Non-aqueous synthesis of silver nanoparticles using tin acetate as a reducing agent for the conductive ink formulation in printed electronics
Ravi Shankar et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Ultrafast near-infrared sintering of a slot-die coated nano-silver conducting ink
Martyn Cherrington et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Stable Aqueous Based Cu Nanoparticle Ink for Printing Well-Defined Highly Conductive Features on a Plastic Substrate
Sunho Jeong et al.
LANGMUIR (2011)
Solution-processed transparent electrodes
David S. Hecht et al.
MRS BULLETIN (2011)
ITO nanowires and nanoparticles for transparent films
Eric N. Dattoli et al.
MRS BULLETIN (2011)
Fully Printed Separated Carbon Nanotube Thin Film Transistor Circuits and Its Application in Organic Light Emitting Diode Control
Pochiang Chen et al.
NANO LETTERS (2011)
Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors
Lu Huang et al.
NANO RESEARCH (2011)
Synthesis and characterization of low temperature Sn nanoparticles for the fabrication of highly conductive ink
Yun Hwan Jo et al.
NANOTECHNOLOGY (2011)
Synthesis of silver nano particles and fabrication of aqueous Ag inks for inkjet printing
A. Kosmala et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
Inkjet printing of single-crystal films
Hiromi Minemawari et al.
NATURE (2011)
Entirely solution-processed write-once-read-many-times memory devices and their operation mechanism
Jianpu Wang et al.
ORGANIC ELECTRONICS (2011)
Electrical Sintering of Silver Nanoparticle Ink Studied by In-Situ TEM Probing
Magnus Hummelgard et al.
PLOS ONE (2011)
Combinatorial Screening of Polymer:Fullerene Blends for Organic Solar Cells by Inkjet Printing
Anke Teichler et al.
ADVANCED ENERGY MATERIALS (2011)
High Yield, Single Droplet Electrode Arrays for Nanoscale Printed Electronics
Mario Caironi et al.
ACS NANO (2010)
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Shlomo Magdassi et al.
ACS NANO (2010)
Hydrophilic Sparse Ionic Monolayer-Protected Metal Nanoparticles: Highly Concentrated Nano-Au and Nano-Ag Inks that can be Sintered to Near-Bulk Conductivity at 150°C
Bibin T. Anto et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Inkjet Printing-Process and Its Applications
Madhusudan Singh et al.
ADVANCED MATERIALS (2010)
All-Organic Vapor Sensor Using Inkjet-Printed Reduced Graphene Oxide
Vineet Dua et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)
Printed energy storage devices by integration of electrodes and separators into single sheets of paper
Liangbing Hu et al.
APPLIED PHYSICS LETTERS (2010)
Inkjet Printing of Conductive Silver Patterns by Using the First Aqueous Particle-Free MOD Ink without Additional Stabilizing Ligands
Stephan F. Jahn et al.
CHEMISTRY OF MATERIALS (2010)
A simple way of preparing high-concentration and high-purity nano copper colloid for conductive ink in inkjet printing technology
Xiao-Feng Tang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2010)
All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic Foils
Minhun Jung et al.
IEEE TRANSACTIONS ON ELECTRON DEVICES (2010)
Scalability of Roll-to-Roll Gravure-Printed Electrodes on Plastic Foils
Jinsoo Noh et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2010)
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
Morteza Oghbaei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Preparation of aqueous Ag Ink with long-term dispersion stability and its inkjet printing for fabricating conductive tracks on a polyimide film
Sunho Jeong et al.
JOURNAL OF APPLIED PHYSICS (2010)
Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing
Frederik C. Krebs et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials
Jolke Perelaer et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Combined Role of Well-Dispersed Aqueous Ag Ink and the Molecular Adhesive Layer in Inkjet Printing the Narrow and Highly Conductive Ag Features on a Glass Substrate
Sunho Jeong et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2010)
Modelling of nanoparticle sintering under electrical boundary conditions
A. T. Alastalo et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)
Laser Printing Single Gold Nanoparticles
Alexander S. Urban et al.
NANO LETTERS (2010)
Substrate-facilitated nanoparticle sintering and component interconnection procedure
Mark Allen et al.
NANOTECHNOLOGY (2010)
A novel method to produce Pd nanoparticle ink for ink-jet printing technology
Chun-Chieh Tseng et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2009)
Investigation of Gold Nanoparticle Inks for Low-Temperature Lead-Free Packaging Technology
Teymur Bakhishev et al.
JOURNAL OF ELECTRONIC MATERIALS (2009)
Conductive copper and nickel lines via reactive inkjet printing
Dapeng Li et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Zinc oxide derived from single source precursor chemistry under chimie douce conditions: formation pathway, defect chemistry and possible applications in thin film printing
Joerg J. Schneider et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Formation of air-stable copper-silver core-shell nanoparticles for inkjet printing
Michael Grouchko et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Argon plasma sintering of inkjet printed silver tracks on polymer substrates
Ingo Reinhold et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Paper-based, printed zinc-air battery
M. Hilder et al.
JOURNAL OF POWER SOURCES (2009)
Influence of Fluid Physical Properties on Ink-Jet Printability
Daehwan Jang et al.
LANGMUIR (2009)
One-step inkjet printing of conductive silver tracks on polymer substrates
Jolke Perelaer et al.
NANOTECHNOLOGY (2009)
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Controlling the thickness of the surface oxide layer on Cu nanoparticles for the fabrication of conductive structures by ink-jet printing
Sunho Jeong et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Inkjet printing of narrow conductive tracks on untreated polymeric substrates
Thijs H. J. van Osch et al.
ADVANCED MATERIALS (2008)
Printing highly efficient organic solar cells
Claudia N. Hoth et al.
NANO LETTERS (2008)
Electrical sintering of nanoparticle structures
Mark L. Allen et al.
NANOTECHNOLOGY (2008)
Organic transistors manufactured using inkjet technology with subfemtoliter accuracy
Tsuyoshi Sekitani et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
Downscaling of self-aligned, all-printed polymer thin-film transistors
Yong-Young Noh et al.
NATURE NANOTECHNOLOGY (2007)
Printed graphene circuits
Jian-Hao Chen et al.
ADVANCED MATERIALS (2007)
All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles
Seung H. Ko et al.
NANOTECHNOLOGY (2007)
Environmentally friendly synthesis of organic-soluble silver nanoparticles for printed electronics
Kwi Jong Lee et al.
NANOTECHNOLOGY (2007)
Fabrication of water-dispersible polyaniline-poly(4-styrenesulfonate) nanoparticles for inkjet-printed chemical-sensor applications
Jyongsik Jang et al.
ADVANCED MATERIALS (2007)
A large-area wireless power-transmission sheet using printed organic transistors and plastic MEMS switches
Tsuyoshi Sekitani et al.
NATURE MATERIALS (2007)
Inkjet printed chemical sensor array based on polythiophene conductive polymers
Bo Li et al.
SENSORS AND ACTUATORS B-CHEMICAL (2007)
Controlled insulator-to-metal transformation in printable polymer composites with nanometal clusters
Sankaran Sivaramakrishnan et al.
NATURE MATERIALS (2007)
Inkjet printing of electrically conductive patterns of carbon nanotubes
Krisztian Kordas et al.
SMALL (2006)
Piezoelectric nanogenerators based on zinc oxide nanowire arrays
ZL Wang et al.
SCIENCE (2006)
Dispersion and rheology of nickel nanoparticle inks
WJ Tseng et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Inkjet printing of nanosized silver colloids
HH Lee et al.
NANOTECHNOLOGY (2005)
Large area electronics using printing, methods
R Parashkov et al.
PROCEEDINGS OF THE IEEE (2005)
Formulation and processing of novel conductive solution inks in continuous inkjet printing of 3-D electric circuits
JF Mei et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2005)
Conductor microstructures by laser curing of printed gold nanoparticle ink
JW Chung et al.
APPLIED PHYSICS LETTERS (2004)
Field emission characteristic of screen-printed carbon nanotube cathode
JT Li et al.
APPLIED SURFACE SCIENCE (2003)
Inkjet printing of highly loaded particulate suspensions
B Derby et al.
MRS BULLETIN (2003)
High-resolution inkjet printing of all-polymer transistor circuits
H Sirringhaus et al.
SCIENCE (2000)
Sintering activation by external electrical field
JR Groza et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)