Related references
Note: Only part of the references are listed.Microstructure and wear behavior of AA6061/SiC surface composite fabricated via friction stir processing with different pins and passes
Hamidreza Eftekharinia et al.
RARE METALS (2020)
Distribution of reinforcement particles in surface composite fabrication via friction stir processing: Suitable strategy
Sandeep Rathee et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Challenges in Thermo-mechanical Analysis of Friction Stir Welding Processes
N. Dialami et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2017)
The effect of reinforcement type on the microstructure, mechanical properties, and wear resistance of A356 matrix composites produced by FSP
Mohammad Hasan Shojaeefard et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Wear Characteristics of Al5083 Surface Hybrid Nano-composites by Friction Stir Processing
N. Yuvaraj et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)
Investigating Effects of Groove Dimensions on Microstructure and Mechanical Properties of AA6063/SiC Surface Composites Produced by Friction Stir Processing
Sandeep Rathee et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)
Effect of tool plunge depth on reinforcement particles distribution in surface composite fabrication via friction stir processing
Sandeep Rathee et al.
DEFENCE TECHNOLOGY (2017)
Laser-based Surface Modifications of Aluminum and its Alloys
M. M. Quazi et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2016)
Microstructure and Mechanical Properties of AZ31/SiC and AZ31/CNT Composites Produced by Friction Stir Processing
A. Alavi Nia et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)
Fabrication of Mg-ZrO2 surface layer composites by friction stir processing
Mohammad Navazani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Microstructure evolution and tribological behavior of the solid lubricant based surface composite of cast nickel aluminum bronze developed by friction stir processing
Shivraman Thapliyal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Friction-stir processing of an AA8026-TiB2-Al2O3 hybrid nanocomposite: Microstructural developments and mechanical properties
H. Eskandari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of process parameter on mechanical properties and fracture behavior of AZ91C/SiO2 composite fabricated by FSP
M. Dadashpour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Fabrication of a new Al-Al2O3-CNTs composite using friction stir processing (FSP)
Zhenglin Du et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Investigating the microstructure and mechanical properties of Al-TiB2 composite fabricated by Friction Stir Processing (FSP)
Mohammad Narimani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effects of friction stir processing on the microstructure and superplasticity of in situ nano-ZrB2/2024Al composite
Yutao Zhao et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Evaluation of the microstructure and wear behaviour of AA6063-B4C/TiB2 mono and hybrid composite layers produced by friction stir processing
Mohammad Narimani et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Effects of friction stir processing on the microstructure and superplasticity of in situ nano-ZrB2/2024Al composite
Yutao Zhao et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Processing-structure-property correlation in nano-SiC-reinforced friction stir welded aluminum joints
Hasan Mohammadzadeh Jamalian et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Preparation of Al2O3/TiO2 particle-reinforced copper through plasma spraying and friction stir processing
Chao Li et al.
MATERIALS & DESIGN (2016)
Effect of friction stir processing pass sequence on properties of Mg-ZrSiO4-Al2O3 surface hybrid micro/nano-composites
M. Sharifitabar et al.
MATERIALS & DESIGN (2016)
Influence of boron nitride nanoparticles on microstructure and wear behavior of AA6082/TiB2 hybrid aluminum composites synthesized by friction stir processing
R. Palanivel et al.
MATERIALS & DESIGN (2016)
Effect of ceramic particulate type on microstructure and properties of copper matrix composites synthesized by friction stir processing
Issac Dinaharan et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Effects of Tilt Angle on the Properties of Dissimilar Friction Stir Welding Copper to Aluminum
Kush P. Mehta et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Influence of ceramic particulate type on microstructure and tensile strength of aluminum matrix composites produced using friction stir processing
I. Dinaharan
JOURNAL OF ASIAN CERAMIC SOCIETIES (2016)
Fabrication and Machining of Metal Matrix Composites: A Review
Preetkanwal Singh Bains et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Influence of Friction Stir Processed Parameters on Superplasticity of Al-Zn-Mg-Cu Alloy
Vivek V. Patel et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
The Fabrication and Properties of the Squeeze-Cast TiN/Al Composites
Yuan Lu et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Formation of a Tribologically Transformed Surface (TTS) on AISI 1045 Steel by Friction Stir Processing
C. Langlade et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Friction Stir Processing Strategies for Uniform Distribution of Reinforcement in a Surface Composite
Vipin Sharma et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Synthesis and characterization of titanium carbide particulate reinforced AA6082 aluminium alloy composites via friction stir processing
A. Thangarasu et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2015)
Experimental evaluation of ultrasonic-assisted friction stir process effect on in situ dispersion of multi-walled carbon nanotubes throughout polyamide 6
Reza Farshbaf Zinati
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Effect of friction stir processing with B4C particles on the microstructure and mechanical properties of 6061 aluminum alloy
Yong Zhao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Fabrication of Al5083 surface composites reinforced by CNTs and cerium oxide nano particles via friction stir processing
S. A. Hosseini et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Mechanical Properties and Corrosion Behavior of CeO2 and SiC Incorporated Al5083 Alloy Surface Composites
M. Amra et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Microstructural and mechanical behaviors of nano-SiC-reinforced AA7075-O FSW joints prepared through two passes
Mohsen Bahrami et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Fabrication of metal matrix composites by friction stir processing with different Particles and processing parameters
S. Sahraeinejad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Tungsten particle reinforced Al 5083 composite with high strength and ductility
Ranjit Bauri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Strengthening analyses and mechanical assessment of Ti/Al2O3 nano-composites produced by friction stir processing
Aziz Shafiei-Zarghani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Wear performance of Al/TiN dispersion strengthened surface composite produced through friction stir process: A comparison of tool geometries and number of passes
R. Hashemi et al.
WEAR (2015)
Optimization of Mechanical and Wear Properties of Functionally Graded A16061/SiC Nanocomposites Produced by Friction Stir Processing (FSP)
M. Saadatmand et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2015)
Fabrication of Al5083/B4C surface composite by friction stir processing and its tribological characterization
Narayana Yuvaraj et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)
Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with Hybrid Surface Nanocomposite
T. Prakash et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2015)
Mechanical and microstructural characterization of Cu/CNT nanocomposite layers fabricated via friction stir processing
Jalal Jafari et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
The effect of FSP on mechanical, tribological, and corrosion behavior of composite layer developed on magnesium AZ91 alloy surface
M. Abbasi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Improvement of Mechanical Properties in the Functionally Graded Aluminum Matrix Nanocomposites Fabricated via a Novel Multistep Friction Stir Processing
Mojtaba Salehi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)
Fabrication of Al/AlN nano-composite layers by friction stir processing of 6061 Al-T6 substrate
Seyed Farshid Kashani-Bozorg et al.
SURFACE AND INTERFACE ANALYSIS (2015)
Modeling Tensile Strength of Al-SiC Functionally Graded Composite Produced Using Friction Stir Processing (FSP)
M. Saadatmand et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2015)
Friction Stir Processing of Mild Steel/Al2O3 Nanocomposite: Modeling and Experimental Studies
Ahmad Ghasemi-Kahrizsangi et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2015)
Microstructural, mechanical, and thermophysical characterization of Cu/WC composite layers fabricated via friction stir processing
Jahangir Khosravi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Experimental investigation on deformation and wear of WC tool during friction stir welding (FSW) of stainless steel
Arshad Noor Siddiquee et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Numerical and experimental investigation of FSP of PA 6/MWCNT composite
R. Farshbaf Zinati et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Nano-hydroxyapatite reinforced AZ31 magnesium alloy by friction stir processing: a solid state processing for biodegradable metal matrix composites
B. Ratna Sunil et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)
Microstructure and mechanical properties of Cu/SiC metal matrix composite fabricated via friction stir processing
H. R. Akramifard et al.
MATERIALS & DESIGN (2014)
Fabrication and characterization of functionally graded Al-SiC nanocomposite by using a novel multistep friction stir processing
Mojtaba Salehi et al.
MATERIALS & DESIGN (2014)
A novel approach to develop aluminum matrix nano-composite employing friction stir welding technique
Mohsen Bahrami et al.
MATERIALS & DESIGN (2014)
Effect of shoulder diameter to pin diameter (D/d) ratio on tensile strength and ductility of friction stir processed LM25AA-5% SiCp metal matrix composites
P. Vijayavel et al.
MATERIALS & DESIGN (2014)
Prediction of mechanical and wear properties of copper surface composites fabricated using friction stir processing
R. Sathiskumar et al.
MATERIALS & DESIGN (2014)
Effects of post-annealing on the microstructure and mechanical properties of friction stir processed Al-Mg-TiO2 nanocomposites
F. Khodabakhshi et al.
MATERIALS & DESIGN (2014)
On the role of pin geometry in microstructure and mechanical properties of AA7075/SiC nano-composite fabricated by friction stir welding technique
Mohsen Bahrami et al.
MATERIALS & DESIGN (2014)
Microstructure and surface mechanical property of AZ31 Mg/SiCp surface composite fabricated by Direct Friction Stir Processing
Yongxian Huang et al.
MATERIALS & DESIGN (2014)
Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites
Omyma El-Kady et al.
MATERIALS & DESIGN (2014)
Characterization of oxide dispersion strengthened copper based materials developed by friction stir processing
M. -N. Avettand-Fenoel et al.
MATERIALS & DESIGN (2014)
Effects of nano-Al2O3 particle addition on grain structure evolution and mechanical behaviour of friction-stir-processed Al
J. F. Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The effect of SiC nanoparticles on the friction stir processing of severely deformed aluminum
M. Sarkari Khorrami et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Tribological Behavior of A356/Al2O3 Surface Nanocomposite Prepared by Friction Stir Processing
Y. Mazaheri et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Grain Growth Behavior and Hall-Petch Strengthening in Friction Stir Processed Al 5059
Hossein Izadi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Optimizing Powder Distribution in Production of Surface Nano-Composite via Friction Stir Processing
Arash Heydarian et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
Mechanical properties of aluminum-based nanocomposite reinforced with fullerenes
Kwangmin Choi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Relationship between friction stir processing parameters and torque, temperature and the penetration depth of the tool
Marek Stanislaw Weglowski et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2013)
An innovative fabrication of nano-HA coatings on Ti-CaP nanocomposite layer using a combination of friction stir processing and electrophoretic deposition
Hamidreza Farnoush et al.
CERAMICS INTERNATIONAL (2013)
Microstructural evaluation and corrosion properties. of aluminium matrix surface composite adding Al-based amorphous fabricated by friction stir processing
Peng Liu et al.
COMPOSITES PART B-ENGINEERING (2013)
A novel route for development of Al-Cr-O surface nano-composite by friction stir processing
S. R. Anvari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Reinforcement strategies for producing functionally graded materials by friction stir processing in aluminium alloys
R. M. Miranda et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs)
Chang-Soo Kim et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Influence of rotational speed and reinforcements on wear and mechanical properties of aluminum hybrid composites via friction stir processing
A. Devaraju et al.
MATERIALS & DESIGN (2013)
Influence of reinforcements (SiC and Al2O3) and rotational speed on wear and mechanical properties of aluminum alloy 6061-T6 based surface hybrid composites produced via friction stir processing
A. Devaraju et al.
MATERIALS & DESIGN (2013)
Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing
Qiang Liu et al.
MATERIALS & DESIGN (2013)
Wear characterization of functionally graded Al-SiC composite coatings produced by Friction Surfacing
J. Gandra et al.
MATERIALS & DESIGN (2013)
In-situ formation of Al2O3 nanoparticles during friction stir processing of Al-SiO2 composite
G. L. You et al.
MATERIALS CHARACTERIZATION (2013)
Characterization of boron carbide particulate reinforced in situ copper surface composites synthesized using friction stir processing
R. Sathiskumar et al.
MATERIALS CHARACTERIZATION (2013)
Fabrication of TiCp/Ti-6Al-4V surface composite via friction stir processing (FSP): Process optimization, particle dispersion-refinement behavior and hardening mechanism
Bo Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The effect of process parameters on microstructural characteristics of AZ91/SiO2 composite fabricated by FSP
D. Khayyamin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Role of hybrid ratio in microstructural, mechanical and sliding wear properties of the Al5083/Graphitep/Al2O3p a surface hybrid nanocomposite fabricated via friction stir processing method
A. Mostafapour Asl et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effects of thermal conditions on microstructure in nanocomposite of Al/Si3N4 produced by friction stir processing
Mohammad Ali Moghaddas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Producing of AA5083/ZrO2 Nanocomposite by Friction Stir Processing (FSP)
Saeid Shahraki et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)
Influence of addition of Grp/Al2O3p with SiCp on wear properties of aluminum alloy 6061-T6 hybrid composites via friction stir processing
A. Devaraju et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Microstructure and mechanical property of A356 based composite by friction stir processing
Don-Hyun Choi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Wear performance of nano-Al2O3 particles and CNTs reinforced magnesium matrix composites by friction stir processing
Dehong Lu et al.
WEAR (2013)
Friction and wear performance of copper graphite surface composites fabricated by friction stir processing (FSP)
H. Sarmadi et al.
WEAR (2013)
On the feasibility of producing polymer-metal composites via novel variant of friction stir processing
Ehsan Azarsa et al.
JOURNAL OF MANUFACTURING PROCESSES (2013)
Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processing
Devaraju Aruri et al.
Journal of Materials Research and Technology-JMR&T (2013)
Review of tools for friction stir welding and processing
Y. N. Zhang et al.
CANADIAN METALLURGICAL QUARTERLY (2012)
Distribution and stability of carbon nanotubes during multi-pass friction stir processing of carbon nanotube/aluminum composites
Hossein Izadi et al.
CARBON (2012)
Corrosion behavior of a friction stir processed rare-earth added magnesium alloy
G. R. Argade et al.
CORROSION SCIENCE (2012)
On the role of cooling and tool rotational direction on microstructure and mechanical properties of friction stir processed AZ91
P. Asadi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
The influence of multi-pass friction stir processing on the microstructural and mechanical properties of Aluminum Alloy 6082
Magdy M. El-Rayes et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Simulation of material flow in friction stir processing of a cast Al-Si alloy
S. Tutunchilar et al.
MATERIALS & DESIGN (2012)
Investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing
A. Dolatkhah et al.
MATERIALS & DESIGN (2012)
Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes
S. A. Sajjadi et al.
MATERIALS & DESIGN (2012)
Effect of processing parameters on fabrication of Al-Mg/Cu composites via friction stir processing
Mehdi Zohoor et al.
MATERIALS & DESIGN (2012)
Microstructural evolution and mechanical properties of ultrafine grained Al3Ti/Al-5.5Cu composites produced via hot pressing and subsequent friction stir processing
Q. Zhang et al.
MATERIALS CHEMISTRY AND PHYSICS (2012)
Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect
A. Sanaty-Zadeh
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Microstructure and sliding wear behavior of AA6360/(TiC+B4C) hybrid surface composite layer synthesized by friction stir processing on aluminum substrate
C. Maxwell Rejil et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Microstructure and mechanical property of nano-SiCp reinforced high strength Mg bulk composites produced by friction stir processing
K. Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Fabrication of aluminum-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing
K. J. Hodder et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Transient Heat and Material Flow Modeling of Friction Stir Processing of Magnesium Alloy using Threaded Tool
Zhenzhen Yu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Microstructure and mechanical properties of steel/TiC nano-composite surface layer produced by friction stir processing
Ahmad Ghasemi-Kahrizsangi et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Optimization of process parameters for producing AA6061/SiC nanocomposites by friction stir processing
M. Salehi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Microstructural and tribological properties of Al5083 based surface hybrid composite produced by friction stir processing
S. Soleymani et al.
WEAR (2012)
Some Investigations on Friction Stir Processed Zone of AZ91 Alloy
H. S. Arora et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2012)
Optimization of friction stir process parameters in fabricating AA6061/SiCp composites
M. Puviyarasan et al.
INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING (2012)
Fabrication of in situ Cu/SiC composites using multi-pass friction stir processing: Evaluation of microstructural, porosity, mechanical and electrical behavior
Mohsen Barmouz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Friction stir welded structural materials: beyond Al-alloys
G. Çam
INTERNATIONAL MATERIALS REVIEWS (2011)
Friction Stir Processing of Aluminum Cast Alloys for High Performance Applications
N. Sun et al.
JOM (2011)
Effect of Process Parameters on Microstructure and Micro-hardness of AZ91/Al2O3 Surface Composite Produced by FSP
Ghader Faraji et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
Surface modification of aluminium by friction stir processing
Adem Kurt et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Functionally graded materials produced by friction stir processing
J. Gandra et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
A novel technique for development of A356/Al2O3 surface nanocomposite by friction stir processing
Y. Mazaheri et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route
M. Sharifitabar et al.
MATERIALS & DESIGN (2011)
Microstructure and tribological performance of an aluminium alloy based hybrid composite produced by friction stir processing
S. A. Alidokht et al.
MATERIALS & DESIGN (2011)
Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing
M. Azizieh et al.
MATERIALS & DESIGN (2011)
Preparation of a Functionally Gradient Aluminum Alloy Metal Matrix Composite Using the Technique of Spray Deposition
J. L. Shi et al.
MATERIALS AND MANUFACTURING PROCESSES (2011)
Forming Nanocrystalline Surface Layers in Copper Using Friction Stir Processing
K. Dehghani et al.
MATERIALS AND MANUFACTURING PROCESSES (2011)
On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior
Mohsen Barmouz et al.
MATERIALS CHARACTERIZATION (2011)
Formation mechanism of in situ Al3Ti in Al matrix during hot pressing and subsequent friction stir processing
Q. Zhang et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
In situ Al3Ti and Al2O3 nanoparticles reinforced Al composites produced by friction stir processing in an Al-TiO2 system
Q. Zhang et al.
MATERIALS LETTERS (2011)
A novel approach for producing polymer nanocomposites by in-situ dispersion of clay particles via friction stir processing
Mohsen Barmouz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: Effect of SiC particles' size and volume fraction
M. Barmouz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Characterization of AZ91/alumina nanocomposite produced by FSP
Ghader Faraji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Microstructural, mechanical and wear behavior of A390/graphite and A390/Al2O3 surface composites fabricated using FSP
M. Raaft et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Experimental Investigation of Magnesium-Base Nanocomposite Produced by Friction Stir Processing: Effects of Particle Types and Number of Friction Stir Processing Passes
P. Asadi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Review: friction stir welding tools
R. Rai et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
The effects of friction-stir process parameters on the fabrication of Ti/SiC nano-composite surface layer
Ali Shamsipur et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Improving the tribological characteristics of aluminum 6061 alloy by surface compositing with sub-micro-size ceramic particles via friction stir processing
Jun Qu et al.
WEAR (2011)
Wear assessment of Al/Al2O3 nano-composite surface layer produced using friction stir processing
A. Shafiei-Zarghani et al.
WEAR (2011)
Producing of AZ91/SiC composite by friction stir processing (FSP)
Parviz Asadi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Al-Ni intermetallic composites produced in situ by friction stir processing
Liming Ke et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Understanding the material flow path of friction stir welding process using unthreaded tools
Olivier Lorrain et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Effect of tool rotating rate on foaming properties of porous aluminum fabricated by using friction stir processing
Yoshihiko Hangai et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Fabrication of AA6061/Al2O3 nano ceramic particle reinforced composite coating by using friction stir processing
Min Yang et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Effect of silicon carbide particulates on wear resistance of graphitic aluminium matrix composites
S. Suresha et al.
MATERIALS & DESIGN (2010)
On the role of process variables in the friction stir processing of cast aluminum A319 alloy
L. Karthikeyan et al.
MATERIALS & DESIGN (2010)
Laser Surface Alloying of Aluminum (AA1200) with Ni and SiC Powders
L. A. B. Mabhali et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
A novel approach for development of surface nanocomposite by friction stir processing
B. Zahmatkesh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of Processing Parameters on Microstructure and Mechanical Properties of an Al-Al11Ce3-Al2O3 In-Situ Composite Produced by Friction Stir Processing
C. F. Chen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Fabrication of Aluminum Foam/Dense Steel Composite by Friction Stir Welding
Yoshihiko Hangai et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing
Essam R. I. Mahmoud et al.
WEAR (2010)
Friction Stir Processing of Particle Reinforced Composite Materials
Yong X. Gan et al.
MATERIALS (2010)
A novel way to produce bulk SiCp reinforced aluminum metal matrix composites by friction stir processing
Wei Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Synthesis of multi-walled CNT reinforced aluminium alloy composite via friction stir processing
D. K. Lim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing
A. Shafiei-Zarghani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Microstructure and mechanical properties of friction stir welded AA6063-B4C metal matrix composites
X-G. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Fabrication of Porous Aluminum by Friction Stir Processing
Yoshihiko Hangai et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface
E. R. I. Mahmoud et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Effect of microstructural evolution on mechanical properties of friction stir welded AA2009/SiCp composite
A. H. Feng et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Microstructure and mechanical properties of Al-Fe in situ nanocomposite produced by friction stir processing
I. S. Lee et al.
INTERMETALLICS (2008)
Experimental study on temperature distributions within the workpiece during friction stir welding of aluminum alloys
Yeong-Maw Hwang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Microstructure and hardness of friction stir processed AZ31 with SiCP
M. Najafi et al.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2008)
In situ synthesis of Al-TiCp composites by reacting K2TiF6 and particulate graphite in molten aluminium
Y. Birol
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy
K. Elangovan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy
K. Elangovan et al.
MATERIALS & DESIGN (2008)
Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites
Z. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Friction stir processing technology: A review
Z. Y. Ma
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Recent advances in friction-stir welding - Process, weldment structure and properties
R. Nandan et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Fabrication of SiC particle reinforced composite on aluminium surface by friction stir processing
E. R. I. Mahmoud et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2008)
Flow visualization and simulation in FSW
A. P. Reynolds
SCRIPTA MATERIALIA (2008)
Recrystallization mechanisms during friction stir welding/processing of aluminum alloys
T. R. McNelley et al.
SCRIPTA MATERIALIA (2008)
Microstructural evolution, hardness, and alligatoring in the mushy state rolled cast Al-4.5Cu alloy and in-situ Al4.5Cu-5TiB2 composite
Mervin A. Herbert et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Novel nanoparticle-reinforced metal matrix composites with enhanced mechanical properties
Sie Chin Tjong
ADVANCED ENGINEERING MATERIALS (2007)
Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite
S. Basavarajappa et al.
WEAR (2007)
Microstructure and mechanical properties of Nano-ZrO2 and Nano-SiO2 particulate reinforced AZ31-Mg based composites fabricated by friction stir processing
C. I. Chang et al.
COMPOSITE MATERIALS V (2007)
Fullerene/A5083 composites fabricated by material flow during friction stir processing
Y. Morisada et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
The influence of the ratio of rotational speed/traverse speed (ω/ν) on mechanical properties of AZ31 friction stir welds
M. Abbasi Gharacheh et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Al-Al3Ti nanocomposites produced in situ by friction stir processing
C. J. Hsu et al.
ACTA MATERIALIA (2006)
Effect of friction stir processing with SiC particles on microstructure and hardness of AZ31
Y. Morisada et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Survivability of single-walled carbon nanotubes during friction stir processing
Lucie B. Johannes et al.
NANOTECHNOLOGY (2006)
Ceramic and metal matrix composites: Routes and properties
M. Rosso
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Mg based nano-composites fabricated by friction stir processing
CJ Lee et al.
SCRIPTA MATERIALIA (2006)
MWCNTs/AZ31 surface composites fabricated by friction stir processing
Y Morisada et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Metal matrix composites - From science to technological significance
DB Miracle
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Using friction stir processing to fabricate MgAlZn intermetallic alloys
CH Chuang et al.
SCRIPTA MATERIALIA (2005)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Ultrafine-grained Al-Al2Cu composite produced in situ by friction stir processing
CJ Hsu et al.
SCRIPTA MATERIALIA (2005)
Investigation of the clustering behaviour of titanium diboride particles in aluminium
IG Watson et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Mechanical properties of Friction Stir Processed 2618/Al2O2O3/20p metal matrix composite
P Cavaliere
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Friction stir processing: a novel technique for fabrication of surface composite
RS Mishra et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Flow patterns during friction stir welding
A Guerra et al.
MATERIALS CHARACTERIZATION (2002)
Size dependent strengthening in particle reinforced aluminium
M Kouzeli et al.
ACTA MATERIALIA (2002)
Tool wear in the friction-stir welding of aluminum alloy 6061+20% Al2O3:: a preliminary study
RA Prado et al.
SCRIPTA MATERIALIA (2001)
Friction stir processing: A tool to homogenize nanocomposite aluminum alloys
PB Berbon et al.
SCRIPTA MATERIALIA (2001)
Microstructural and mechanical characteristics of in situ metal matrix composites
SC Tjong et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)
Microstructures of in situ Al/TiB2 MMCs prepared by a casting route
CF Feng et al.
JOURNAL OF MATERIALS SCIENCE (2000)
Share Paper
