Related references
Note: Only part of the references are listed.Effect of density on the hygroscopicity and surface characteristics of hybrid poplar compreg
Minzhen Bao et al.
JOURNAL OF WOOD SCIENCE (2016)
Production and mechanical performance of scrimber composite manufactured from poplar wood for structural applications
Min-Juan He et al.
JOURNAL OF WOOD SCIENCE (2016)
Surface wettability of short-term thermo-mechanically densified wood veneers
Pavlo Bekhta et al.
European Journal of Wood and Wood Products (2015)
Effect of initial moisture content on the anti-swelling efficiency of thermally modified Scots pine sapwood treated in a high-pressure reactor under saturated steam
Lauri Rautkari et al.
HOLZFORSCHUNG (2014)
The influence of thermal-hydro-mechanical processing on chemical characterization of Tsuga heterophylla
Hongling Liu et al.
WOOD SCIENCE AND TECHNOLOGY (2014)
Analysis of the pore-size distribution and fiber saturation point of native and thermally modified wood using differential scanning calorimetry
Mario Zauer et al.
WOOD SCIENCE AND TECHNOLOGY (2014)
Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography
Gernot Standfest et al.
WOOD SCIENCE AND TECHNOLOGY (2013)
Influence of the thermo-hydro-mechanical treatments of wood on the performance against wood-degrading fungi
Bostjan Lesar et al.
WOOD SCIENCE AND TECHNOLOGY (2013)
Toward improved understanding of the cell-wall density and porosity of wood determined by gas pycnometry
Mario Zauer et al.
WOOD SCIENCE AND TECHNOLOGY (2013)
Thermo-hydro and thermo-hydro-mechanical wood processing: An opportunity for future environmentally friendly wood products
Dick Sandberg et al.
WOOD MATERIAL SCIENCE & ENGINEERING (2013)
Densification of wood veneers by compression combined with heat and steam
Chang-Hua Fang et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2012)
Study of the degradation behavior of heat-treated jack pine (Pinus banksiana) under artificial sunlight irradiation
Xianai Huang et al.
POLYMER DEGRADATION AND STABILITY (2012)
Influence of combined hydro-thermal treatments on selected properties of Turkey oak (Quercus cerris L.) wood
Luigi Todaro et al.
WOOD SCIENCE AND TECHNOLOGY (2012)
Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers
Papa Niokhor Diouf et al.
APPLIED SURFACE SCIENCE (2011)
Fungal decay of viscoelastic thermal compressed (VTC) wood
Andreja Kutnar et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2011)
Porosity and pore size distribution of different wood types as determined by mercury intrusion porosimetry
Michael Ploetze et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2011)
Compressive deformation of phenol formaldehyde (PF) resin-impregnated wood related to the molecular weight of resin
Md. Iftekhar Shams et al.
WOOD SCIENCE AND TECHNOLOGY (2011)
Micropores and mesopores in the cell wall of dry wood
Keisuke Kojiro et al.
JOURNAL OF WOOD SCIENCE (2010)
Density profile and morphology of viscoelastic thermal compressed wood
Andreja Kutnar et al.
WOOD SCIENCE AND TECHNOLOGY (2009)
Micropore structure of wood: Change in micropore structure accompanied by delignification
Takeshi Nakatani et al.
JOURNAL OF WOOD SCIENCE (2008)
Thermo-mechanical densification combined with thermal modification of Norway spruce (Picea abies Karst) in industrial scale -: Dimensional stability and durability aspects
C. R. Welzbacher et al.
HOLZ ALS ROH-UND WERKSTOFF (2008)
The effects of ply organization and loading direction on bending strength and modulus of elasticity in laminated veneer lumber (LVL) obtained from beech (Fagus orientalis L.) and lombardy poplar (Populus nigra L.)
Erol Burdurlu et al.
CONSTRUCTION AND BUILDING MATERIALS (2007)
Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood
Bruno Esteves et al.
WOOD SCIENCE AND TECHNOLOGY (2007)
Optimisation of a two-stage heat treatment process: durability aspects
M. J. Boonstra et al.
WOOD SCIENCE AND TECHNOLOGY (2007)
The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170°C, 190°C, 210°C and 230°C
Sini Metsa-Kortelainen et al.
HOLZ ALS ROH-UND WERKSTOFF (2006)
Effects of semi-isostatic densification of wood on the variation in strength properties with density
J Blomberg et al.
WOOD SCIENCE AND TECHNOLOGY (2005)
Investigation of wood wettability changes during heat treatment on the basis of chemical analysis
M Hakkou et al.
POLYMER DEGRADATION AND STABILITY (2005)
The manufacture of particleboards using sunflower stalks (helianthus annuus l.) and poplar wood (populus alba L.)
I Bektas et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Combined densification and thermo-hydro-mechanical processing of wood
P Navi et al.
MRS BULLETIN (2004)
Cell-wall recovery after irreversible deformation of wood
J Keckes et al.
NATURE MATERIALS (2003)
Trends in wood density and structure are linked to prevention of xylem implosion by negative pressure
UG Hacke et al.
OECOLOGIA (2001)