Related references
Note: Only part of the references are listed.Numerical and experimental evaluation of the relationship between porous electrode structure and effective conductivity of ions and electrons in lithium-ion batteries
Gen Inoue et al.
JOURNAL OF POWER SOURCES (2017)
Modeling of lithium plating induced aging of lithium-ion batteries: Transition from linear to nonlinear aging
Xiao-Guang Yang et al.
JOURNAL OF POWER SOURCES (2017)
Optimal Design of Li-Ion Batteries through Multi-Physics Modeling and Multi-Objective Optimization
Changhong Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Influence of LiPF6 on the Aluminum Current Collector Dissolution in High Voltage Lithium Ion Batteries after Long-Term Charge/Discharge Experiments
Benjamin Streipert et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Optimizing Battery Design for Fast Charge through a Genetic Algorithm Based Multi-objective Optimization framework
Changhong Liu et al.
SELECTED PROCEEDINGS FROM THE 231ST ECS MEETING (2017)
Towards a more realistic battery model: variational multiscale modeling of Li-ion batteries
Lin Liu et al.
SELECTED PROCEEDINGS FROM THE 231ST ECS MEETING (2017)
The role of porosity-graded electrode in mitigating performance degradation of high voltage lithium-ion battery
Lin Liu et al.
SELECTED PROCEEDINGS FROM THE 231ST ECS MEETING (2017)
A microscopic investigation of ion and electron transport in lithium-ion battery porous electrodes using the lattice Boltzmann method
Z. Y. Jiang et al.
APPLIED ENERGY (2017)
On Graded Electrode Porosity as a Design Tool for Improving the Energy Density of Batteries
Yiling Dai et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Chloride-promoted formation of octahedral LiNi0.5Mn1.5O4 crystal with greatly enhanced electrochemical performance
Fushan Feng et al.
CERAMICS INTERNATIONAL (2016)
Origin of the Ni/Mn ordering in high-voltage spinel LiNi0.5Mn1.5O4: The role of oxygen vacancies and cation doping
Yuyang Chen et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
High performance 5 V LiNi0.5Mn1.5O4 spinel cathode materials synthesized by an improved solid-state method
Zhi-Gang Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Multiscale modeling of lithium-ion battery electrodes based on nano-scale X-ray computed tomography
Ali Ghorbani Kashkooli et al.
JOURNAL OF POWER SOURCES (2016)
A Study of Stacking Faults and Superlattice Ordering in Some Li-Rich Layered Transition Metal Oxide Positive Electrode Materials
Ramesh Shunmugasundaram et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
A method to quantify coating thickness and porosity of electrodes for lithium-ion-batteries
Ph. Just et al.
MEASUREMENT (2016)
Synthesis of LiNi0.5Mn1.5O4 cathode material with improved electrochemical performances through a modified solid-state method
Li Wang et al.
POWDER TECHNOLOGY (2016)
5 V class LiNi0.5Mn1.5O4 positive electrode coated with Li3PO4 thin film for all-solid-state batteries using sulfide solid electrolyte
So Yubuchi et al.
SOLID STATE IONICS (2016)
Impact of P-Doped in Spinel LiNi0.5Mn1.5O4 on Degree of Disorder, Grain Morphology, and Electrochemical Performance
Yu-Feng Deng et al.
CHEMISTRY OF MATERIALS (2015)
Influence of surface modification on electrochemical performance of high voltage spinel ordered-LiNi0.5Mn1.5O4 exposed to 5.3 V for 100 h before and after surface modification with ALD method
Chae Ah Kim et al.
ELECTROCHIMICA ACTA (2015)
Direct evidence of gradient Mn(II) evolution at charged states in LiNi0.5Mn1.5O4 electrodes with capacity fading
Ruimin Qiao et al.
JOURNAL OF POWER SOURCES (2015)
Simulation and Experiment on Solid Electrolyte Interphase (SEI) Morphology Evolution and Lithium-Ion Diffusion
Pengjian Guan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Effect of Porosity, Thickness and Tortuosity on Capacity Fade of Anode
Bharatkumar Suthar et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Protective organic additives for high voltage LiNi0.5Mn1.5O4 cathode materials
Seo-Youn Bae et al.
ELECTROCHIMICA ACTA (2014)
Improvement of Electrode/Electrolyte Interfaces in High-Voltage Spinel Lithium-Ion Batteries by Using Glutaric Anhydride as Electrolyte Additive
H. Bouayad et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
A thermal-electrochemical model that gives spatial-dependent growth of solid electrolyte interphase in a Li-ion battery
Lin Liu et al.
JOURNAL OF POWER SOURCES (2014)
Electrochemical properties of high-voltage LiNi0.5Mn1.5O4 synthesized by a solid-state method
Yan-Zhuo Lv et al.
RSC ADVANCES (2014)
LiNi0.5Mn1.5O4 spinel cathode using room temperature ionic liquid as electrolyte
Xuan-Wen Gao et al.
ELECTROCHIMICA ACTA (2013)
Understanding the capacity fading mechanism in LiNi0.5Mn1.5O4/graphite Li-ion batteries
Jung-Hyun Kim et al.
ELECTROCHIMICA ACTA (2013)
The role of fluoride in protecting LiNi0.5Mn1.5O4 electrodes against high temperature degradation
Ketack Kim et al.
ELECTROCHIMICA ACTA (2013)
Understanding Transition-Metal Dissolution Behavior in LiNi0.5Mn1.5O4 High-Voltage Spinel for Lithium Ion Batteries
Nicholas P. W. Pieczonka et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2013)
Model-based simultaneous optimization of multiple design parameters for lithium-ion batteries for maximization of energy density
Sumitava De et al.
JOURNAL OF POWER SOURCES (2013)
Electroactive separator for high voltage graphite/LiNi0.5Mn1.5O4 lithium ion batteries
K. W. Leitner et al.
JOURNAL OF POWER SOURCES (2013)
A Comprehensive Capacity Fade Model and Analysis for Li-Ion Batteries
Xianke Lin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Visualization and Quantification of Electrochemical and Mechanical Degradation in Li Ion Batteries
Martin Ebner et al.
SCIENCE (2013)
Critical silicon-anode size for averting lithiation-induced mechanical failure of lithium-ion batteries
Zengsheng Ma et al.
RSC ADVANCES (2013)
Graphene-oxide-coated LiNi0.5Mn1.5O4 as high voltage cathode for lithium ion batteries with high energy density and long cycle life
Xin Fang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Surface-oriented and nanoflake-stacked LiNi0.5Mn1.5O4 spinel for high-rate and long-cycle-life lithium ion batteries
Zhongxue Chen et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Porous Electrode Materials for Lithium-Ion Batteries - How to Prepare Them and What Makes Them Special
Anh Vu et al.
ADVANCED ENERGY MATERIALS (2012)
Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: A joint experimental and theoretical study
Bo Xu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Synthesis of LiNi0.5Mn1.5O4 by solid-state reaction with improved electrochemical performance
X. Y. Feng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Influence of the cathode porosity on the discharge performance of the lithium-oxygen battery
S. Reza Younesi et al.
JOURNAL OF POWER SOURCES (2011)
Challenges for Rechargeable Li Batteries
John B. Goodenough et al.
CHEMISTRY OF MATERIALS (2010)
Optimal Porosity Distribution for Minimized Ohmic Drop across a Porous Electrode
Venkatasailanathan Ramadesigan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
Performance of LiNi0.5Mn1.5O4 prepared by solid-state reaction
Zhaoyong Chen et al.
JOURNAL OF POWER SOURCES (2009)
The role of the interface of tin electrodes in lithium cells: An impedance study
J. Hassoun et al.
JOURNAL OF POWER SOURCES (2007)
Electrochemical properties of nonstoichiometric LiNi0.5Mn1.5O4-delta thin-film electrodes prepared by pulsed laser deposition
H. Xia et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Safety mechanisms in lithium-ion batteries
PG Balakrishnan et al.
JOURNAL OF POWER SOURCES (2006)
Integrated description of electrode/electrolyte interfaces based on equivalent circuits and its verification using impedance measurements
BY Chang et al.
ANALYTICAL CHEMISTRY (2006)
Surface modifications of electrode materials for lithium ion batteries
LJ Fu et al.
SOLID STATE SCIENCES (2006)
Exploration of high capacity LiNi0.5Mn1.5O4 synthesized by solid-state reaction
HS Fang et al.
JOURNAL OF POWER SOURCES (2006)
Ageing mechanisms in lithium-ion batteries
J Vetter et al.
JOURNAL OF POWER SOURCES (2005)
Microstructural modeling and design of rechargeable lithium-ion batteries
RE Garcia et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Design and optimization of a natural graphite/iron phosphate lithium-ion cell
V Srinivasan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
Effect of porosity on the capacity fade of a lithium-ion battery - Theory
G Sikha et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)