Related references
Note: Only part of the references are listed.Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP
David L. Wood et al.
DRYING TECHNOLOGY (2018)
High-Performance Li-Ion Battery Anodes Based on Silicon-Graphene Self-Assemblies
Nahyeon Kim et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Cycling Behavior of NCM523/Graphite Lithium-Ion Cells in the 3-4.4 V Range: Diagnostic Studies of Full Cells and Harvested Electrodes
James A. Gilbert et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Interfacial Architectures Derived by Lithium Difluoro(bisoxalato) Phosphate for Lithium-Rich Cathodes with Superior Cycling Stability and Rate Capability
Jung-Gu Han et al.
CHEMELECTROCHEM (2017)
Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries
Zhijia Du et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2017)
Fast formation cycling for lithium ion batteries
Seong Jin An et al.
JOURNAL OF POWER SOURCES (2017)
Enabling aqueous processing for crack-free thick electrodes
Zhijia Du et al.
JOURNAL OF POWER SOURCES (2017)
Improvement of the Cycling Performance and Thermal Stability of Lithium-Ion Batteries by Coating Cathode Materials with Al2O3 Nano Layer
Zhaoxia Cao et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
A two layer electrode structure for improved Li Ion diffusion and volumetric capacity in Li Ion batteries
Chun Huang et al.
NANO ENERGY (2017)
On Graded Electrode Porosity as a Design Tool for Improving the Energy Density of Batteries
Yiling Dai et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Kevin G. Gallagher et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Core/Double-Shell Type Gradient Ni-Rich LiNi0.76Co0.10Mn0.14O2 with High Capacity and Long Cycle Life for Lithium-Ion Batteries
Jin-Yun Liao et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Constructing a Protective Interface Film on Layered Lithium-Rich Cathode Using an Electrolyte Additive with Special Molecule Structure
Xiongwen Zheng et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling
Seong Jin An et al.
CARBON (2016)
Lithium Phosphorus Oxynitride Coated Concentration Gradient Li [Ni0.73Co0.12Mn0.15]O2 Cathode Material with Enhanced Electrochemical Properties
Jingpeng Wang et al.
ELECTROCHIMICA ACTA (2016)
Prospects for spinel-stabilized, high-capacity lithium-ion battery cathodes
Jason R. Croy et al.
JOURNAL OF POWER SOURCES (2016)
Influence of laser pulse duration on the electrochemical performance of laser structured LiFePO4 composite electrodes
M. Mangang et al.
JOURNAL OF POWER SOURCES (2016)
Effect of electrode manufacturing defects on electrochemical performance of lithium-ion batteries: Cognizance of the battery failure sources
D. Mohanty et al.
JOURNAL OF POWER SOURCES (2016)
Beneficial effect of propane sultone and tris(trimethylsilyl) borate as electrolyte additives on the cycling stability of the lithium rich nickel manganese cobalt (NMC) oxide
Agnese Birrozzi et al.
JOURNAL OF POWER SOURCES (2016)
A novel imidazole-based electrolyte additive for improved electrochemical performance of high voltage nickel-rich cathode coupled with graphite anode lithium ion battery
Haibo Rong et al.
JOURNAL OF POWER SOURCES (2016)
One strategy to enhance electrochemical properties of Ni-based cathode materials under high cut-off voltage for Li-ion batteries
Longwei Liang et al.
JOURNAL OF POWER SOURCES (2016)
Electron Beam Curing of Composite Positive Electrode for Li-Ion Battery
Zhijia Du et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Long-Term Lithium-Ion Battery Performance Improvement via Ultraviolet Light Treatment of the Graphite Anode
Seong Jin An et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Consumption of Fluoroethylene Carbonate (FEC) on Si-C Composite Electrodes for Li-Ion Batteries
Roland Jung et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials
Dong-Hwa Seo et al.
NATURE CHEMISTRY (2016)
Compositionally Graded Cathode Material with Long-Term Cycling Stability for Electric Vehicles Application
Un-Hyuck Kim et al.
Advanced Energy Materials (2016)
Nanoarchitectured Array Electrodes for Rechargeable Lithium- and Sodium-Ion Batteries
Yang Xu et al.
ADVANCED ENERGY MATERIALS (2016)
On the origin and application of the Bruggeman correlation for analysing transport phenomena in electrochemical systems
Bernhard Tjaden et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2016)
Comparative Study of Ni-Rich Layered Cathodes for Rechargeable Lithium Batteries: Li[Ni0.85Co0.11Al0.04]O2 and Li[Ni0.84Co0.06Mn0.09Al0.01]O2 with Two-Step Full Concentration Gradients
Byung-Beom Lim et al.
ACS ENERGY LETTERS (2016)
High-performance battery electrodes via magnetic templating
J. S. Sander et al.
NATURE ENERGY (2016)
Modification of Ni-Rich FCG NMC and NCA Cathodes by Atomic Layer Deposition: Preventing Surface Phase Transitions for High-Voltage Lithium-Ion Batteries
Debasish Mohanty et al.
SCIENTIFIC REPORTS (2016)
Recent progress of silicon composites as anode materials for secondary batteries
Jingjing Wang et al.
RSC ADVANCES (2016)
Composite anodes for lithium-ion batteries: status and trends
Alain Mauger et al.
AIMS MATERIALS SCIENCE (2016)
Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance
Jianlin Li et al.
MRS ADVANCES (2016)
Review of the US Department of Energy's Deep Dive Effort to Understand Voltage Fade in Li- and Mn-Rich Cathodes
Jason R. Croy et al.
ACCOUNTS OF CHEMICAL RESEARCH (2015)
Controlled Formation of Mixed Nanoscale Domains of High Capacity Fe2O3-FeF3 Conversion Compounds by Direct Fluorination
Hui Zhou et al.
ACS NANO (2015)
Advanced Concentration Gradient Cathode Material with Two-Slope for High-Energy and Safe Lithium Batteries
Byung-Beom Lim et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries
Wen Liu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Iodine doped graphene as anode material for lithium ion battery
Yunfeng Zhan et al.
CARBON (2015)
Enhanced electrochemical performance of ion-beam-treated 3D graphene aerogels for lithium ion batteries
J. C. Ye et al.
CARBON (2015)
Carbon surface functionalities and SEI formation during Li intercalation
John Collins et al.
CARBON (2015)
Impedance Spectroscopy Characterization of Porous Electrodes under Different Electrode Thickness Using a Symmetric Cell for High-Performance Lithium-Ion Batteries
Nobuhiro Ogihara et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2015)
Electrode-Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Magali Gauthier et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Surface-modified concentration-gradient Ni-rich layered oxide cathodes for high-energy lithium-ion batteries
Jin-Yun Liao et al.
JOURNAL OF POWER SOURCES (2015)
Automotive assessment of carbon-silicon composite anodes and methods of fabrication
Mohan Karulkar et al.
JOURNAL OF POWER SOURCES (2015)
Unconventional irreversible structural changes in a high-voltage Li-Mn-rich oxide for lithium-ion battery cathodes
Debasish Mohanty et al.
JOURNAL OF POWER SOURCES (2015)
Prospects for reducing the processing cost of lithium ion batteries
David L. Wood et al.
JOURNAL OF POWER SOURCES (2015)
Li-ion battery materials: present and future
Naoki Nitta et al.
MATERIALS TODAY (2015)
Preparation of porous Si and TiO2 nanofibres using a sulphur-templating method for lithium storage
Kathleen McCormac et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2015)
Self-assembled asymmetric membrane containing micron-size germanium for high capacity lithium ion batteries
Ian Byrd et al.
RSC ADVANCES (2015)
Future generations of cathode materials: an automotive industry perspective
Dave Andre et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Raman Microscopy of Lithium-Manganese-Rich Transition Metal Oxide Cathodes
Rose E. Ruther et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
High capacity group-IV elements (Si, Ge, Sn) based anodes for lithium-ion batteries
Huajun Tian et al.
JOURNAL OF MATERIOMICS (2015)
Recent advances in the electrolytes for interfacial stability of high-voltage cathodes in lithium-ion batteries
Nam-Soon Choi et al.
RSC ADVANCES (2015)
K+-Doped Li1.2Mn0.54Co0.13Ni0.13O2: A Novel Cathode Material with an Enhanced Cycling Stability for Lithium-Ion Batteries
Qi Li et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Non-destructive evaluation of slot-die-coated lithium secondary battery electrodes by in-line laser caliper and IR thermography methods
Debasish Mohanty et al.
ANALYTICAL METHODS (2014)
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Kang Xu
CHEMICAL REVIEWS (2014)
Alloy Negative Electrodes for Li-Ion Batteries
M. N. Obrovac et al.
CHEMICAL REVIEWS (2014)
Unraveling the Voltage-Fade Mechanism in High-Energy-Density Lithium-Ion Batteries: Origin of the Tetrahedral Cations for Spinel Conversion
Debasish Mohanty et al.
CHEMISTRY OF MATERIALS (2014)
Quantifying the promise of lithium-air batteries for electric vehicles
Kevin G. Gallagher et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Computational and Experimental Investigation of Ti Substitution in Li1(NixMnxCo1-2x-yTiy)O2 for Lithium Ion Batteries
Isaac M. Markus et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Effect of interface modifications on voltage fade in 0.5Li2MnO3•0.5LiNi0.375Mn0.375CO0.25O2 cathode materials
Ira Bloom et al.
JOURNAL OF POWER SOURCES (2014)
Modeling mass and density distribution effects on the performance of co-extruded electrodes for high energy density lithium-ion batteries
Code L. Cobb et al.
JOURNAL OF POWER SOURCES (2014)
Performance of LiNi1/3Mn1/3Co1/3O2/graphite batteries based on aqueous binder
Nicholas Loeffler et al.
JOURNAL OF POWER SOURCES (2014)
Next-generation lithium-ion batteries: The promise of near-term advancements
Jason R. Croy et al.
MRS BULLETIN (2014)
Unlocking the Potential of Cation-Disordered Oxides for Rechargeable Lithium Batteries
Jinhyuk Lee et al.
SCIENCE (2014)
Silicon-Based Nanomaterials for Lithium-Ion Batteries: A Review
Xin Su et al.
ADVANCED ENERGY MATERIALS (2014)
Degradation mechanisms of lithium-rich nickel manganese cobalt oxide cathode thin films
Loic Baggetto et al.
RSC ADVANCES (2014)
Design of Battery Electrodes with Dual-Scale Porosity to Minimize Tortuosity and Maximize Performance
Chang-Jun Bae et al.
ADVANCED MATERIALS (2013)
25th Anniversary Article: Understanding the Lithiation of Silicon and Other Alloying Anodes for Lithium-Ion Batteries
Matthew T. McDowell et al.
ADVANCED MATERIALS (2013)
3D Printing of Interdigitated Li-Ion Microbattery Architectures
Ke Sun et al.
ADVANCED MATERIALS (2013)
Model Prediction and Experiments for the Electrode Design Optimization of LiFePO4/Graphite Electrodes in High Capacity Lithium-ion Batteries
Seungho Yu et al.
BULLETIN OF THE KOREAN CHEMICAL SOCIETY (2013)
Polyanionic (Phosphates, Silicates, Sulfates) Frameworks as Electrode Materials for Rechargeable Li (or Na) Batteries
Christian Masquelier et al.
CHEMICAL REVIEWS (2013)
Neutron Diffraction and Magnetic Susceptibility Studies on a High-Voltage Li1.2Mn0.55Ni0.15Co0.10O2 Lithium Ion Battery Cathode: Insight into the Crystal Structure
Debasish Mohanty et al.
CHEMISTRY OF MATERIALS (2013)
Optimization of multicomponent aqueous suspensions of lithium iron phosphate (LiFePO4) nanoparticles and carbon black for lithium-ion battery cathodes
Jianlin Li et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2013)
Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction
Debasish Mohanty et al.
JOURNAL OF POWER SOURCES (2013)
Li-rich layered composite Li[Li0.2Ni0.2Mn0.6]O2 synthesized by a novel approach as cathode material for lithium ion battery
Jing Lin et al.
JOURNAL OF POWER SOURCES (2013)
Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries
Hyung-Joo Noh et al.
JOURNAL OF POWER SOURCES (2013)
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Sheng S. Zhang
JOURNAL OF POWER SOURCES (2013)
Lithium Ion Cell Performance Enhancement Using Aqueous LiFePO4 Cathode Dispersions and Polyethyleneimine Dispersant
Jianlin Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Solid Electrolyte Interphase on Lithium-Ion Carbon Nanofiber Electrodes by Atomic and Molecular Layer Deposition
Andrew J. Loebl et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Validity of the Bruggeman relation for porous electrodes
Ding-Wen Chung et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)
Correlating cation ordering and voltage fade in a lithium-manganese- rich lithium-ion battery cathode oxide: a joint magnetic susceptibility and TEM study
Debasish Mohanty et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD
Xiaofeng Zhang et al.
ADVANCED ENERGY MATERIALS (2013)
Structural transformation in a Li1.2Co0.1Mn0.55Ni0.15O2 lithium-ion battery cathode during high-voltage hold
Debasish Mohanty et al.
RSC ADVANCES (2013)
Controlled fabrication of Si nanoparticles on graphene sheets for Li-ion batteries
Shenmin Zhu et al.
RSC ADVANCES (2013)
Surface modification of Li-rich layered Li(Li0.17Ni0.25Mn0.58)O-2 oxide with Li-Mn-PO4 as the cathode for lithium-ion batteries
Q. Q. Qiao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Investigating phase transformation in the Li1.2Co0.1Mn0.55Ni0.15O2 lithium-ion battery cathode during high-voltage hold (4.5 V) via magnetic, X-ray diffraction and electron microscopy studies
Debasish Mohanty et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Solid electrolyte coated high voltage layered-layered lithium-rich composite cathode: Li1.2Mn0.525Ni0.175Co0.1O2
Surendra K. Martha et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Micromechanisms of solid electrolyte interphase formation on electrochemically cycled graphite electrodes in lithium-ion cells
Sandeep Bhattacharya et al.
CARBON (2012)
Electrochemical and rate performance study of high-voltage lithium-rich composition: Li1.2Mn0.525Ni0.175Co0.1O2
Surendra K. Martha et al.
JOURNAL OF POWER SOURCES (2012)
Performance of batteries for electric vehicles on short and longer term
Sarah J. Gerssen-Gondelach et al.
JOURNAL OF POWER SOURCES (2012)
Superior Performance of LiFePO4 Aqueous Dispersions via Corona Treatment and Surface Energy Optimization
Jianlin Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Effect of Fluoroethylene Carbonate (FEC) on the Performance and Surface Chemistry of Si-Nanowire Li-Ion Battery Anodes
Vinodkumar Etacheri et al.
LANGMUIR (2012)
Optimization of LiFePO4 Nanoparticle Suspensions with Polyethyleneimine for Aqueous Processing
Jianlin Li et al.
LANGMUIR (2012)
Wetting transparency of graphene
Javad Rafiee et al.
NATURE MATERIALS (2012)
Organic Electrode Materials for Rechargeable Lithium Batteries
Yanliang Liang et al.
ADVANCED ENERGY MATERIALS (2012)
Realizing the electric-vehicle revolution
Martino Tran et al.
NATURE CLIMATE CHANGE (2012)
Atomic Structure of a Lithium-Rich Layered Oxide Material for Lithium-Ion Batteries: Evidence of a Solid Solution
Karalee A. Jarvis et al.
CHEMISTRY OF MATERIALS (2011)
Modeling detailed chemistry and transport for solid-electrolyte-interface (SEI) films in Li-ion batteries
Andrew M. Colclasure et al.
ELECTROCHIMICA ACTA (2011)
Novel Size and Surface Oxide Effects in Silicon Nanowires as Lithium Battery Anodes
Matthew T. McDowell et al.
NANO LETTERS (2011)
A Novel Cathode Material with a Concentration-Gradient for High-Energy and Safe Lithium-Ion Batteries
Yang-Kook Sun et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Positive Electrode Materials for Li-Ion and Li-Batteries
Brian L. Ellis et al.
CHEMISTRY OF MATERIALS (2010)
Multi-electron reaction materials for high energy density batteries
Xue-Ping Gao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2010)
Life cycle assessment of lithium-ion batteries for plug-in hybrid electric vehicles - Critical issues
Mats Zackrisson et al.
JOURNAL OF CLEANER PRODUCTION (2010)
Ordered multimodal porous carbon with hierarchical nanostructure for high Li storage capacity and good cycling performance
Baizeng Fang et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Effect of slurry preparation process on electrochemical performances of LiCoO2 composite electrode
Gil-Won Lee et al.
JOURNAL OF POWER SOURCES (2010)
Cyclic deterioration and its improvement for Li-rich layered cathode material Li[Ni0.17Li0.2Co0.07Mn0.56]O2
Atsushi Ito et al.
JOURNAL OF POWER SOURCES (2010)
Using Poly(4-Styrene Sulfonic Acid) to Improve the Dispersion Homogeneity of Aqueous-Processed LiFePO4 Cathodes
Chia-Chen Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
High-energy cathode material for long-life and safe lithium batteries
Yang-Kook Sun et al.
NATURE MATERIALS (2009)
Air exposure effect on LiFePO4
Jean Frederic Martin et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)
Superior electrode performance of nanostructured mesoporous TiO2 (anatase) through efficient hierarchical mixed conducting networks
Yu-Guo Guo et al.
ADVANCED MATERIALS (2007)
Synthesis of hierarchically porous carbon monoliths with highly ordered microstructure and their application in rechargeable lithium batteries with high-rate capability
Yong-Sheng Hu et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Michael M. Thackeray et al.
JOURNAL OF MATERIALS CHEMISTRY (2007)
Improvements of dispersion homogeneity and cell performance of aqueous-processed LiCoO2 cathodes by using dispersant of PAA-NH4
CC Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Interfacial properties of the a-Si/Cu : active-inactive thin-film anode system for lithium-ion batteries
JP Maranchi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Electrochemical insertion of lithium into multiwalled carbon nanotube/silicon composites produced by ballmilling
J. Y. Eom et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Cracking in drying latex films
MS Tirumkudulu et al.
LANGMUIR (2005)
High rate capability of graphite negative electrodes for lithium-ion batteries
H Buqa et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Mixed silicon-graphite composites as anode material for lithium ion batteries influence of preparation conditions on the properties of the material
N Dimov et al.
JOURNAL OF POWER SOURCES (2004)
A fast formation process for lithium batteries
HH Lee et al.
JOURNAL OF POWER SOURCES (2004)
Discharge model for the lithium iron-phosphate electrode
V Srinivasan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
Nonaqueous liquid electrolytes for lithium-based rechargeable batteries
K Xu
CHEMICAL REVIEWS (2004)
Anode materials for lithium ion batteries by oxidative treatment of common natural graphite
YP Wu et al.
SOLID STATE IONICS (2003)
Staging phase transitions in LixCoO2
ZH Chen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)
Purely hexagonal graphite and the influence of surface modifications on its electrochemical lithium insertion properties
ME Spahr et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)
Raman microscopy as a quality control tool for electrodes of lithium-ion batteries
JC Panitz et al.
JOURNAL OF POWER SOURCES (2001)
Effects of catalytic oxidation on the electrochemical performance of common natural graphite as an anode material for lithium ion batteries
YP Wu et al.
ELECTROCHEMISTRY COMMUNICATIONS (2000)
Share Paper
