Esterification of industrial lignin and its effect on the resulting poly(3-hydroxybutyrate-co-3-hydroxyvalerate) or polypropylene blends

Utilisation of lignin in plastic based blends offers a sustainable alternative to non-renewable materials as well as value-added use of technical lignin obtained from pulping operations. To overcome poor compatibility between lignin and plastic, in this study, two industrial lignins (softwood Kraft and agricultural fiber soda) were esterified (with acetic, propionic, butyric, and hexanoic anhydrides) and subsequently blended with poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) or polypropylene (PP) at a weight ratio of 3:7. This paper systematically characterized C-2-C-6 anhydrides esterified lignins (molar mass, glass transition temperature (T-g), hydrophobicity, and polarity), and provides a comprehensive evaluation of the effect of different lignin esters in the blends on tensile properties, water absorption, thermal transitions, for the first time, spherulite morphology, and dynamic rheological behaviour. Generally, compared to blends with unmodified lignin, a progressive increase of tensile strength (25%) and elongation at break (26%) could be observed with increasing ester carbon chain length in PHBV based systems, while no improvement was seen in PP based systems. Water absorption of PHBV and PP blends decreased by about 50% after lignin esterification. The effect of lignin esterification on the crystallization process was matrix dependent: depression of melting crystallization and occurrence of cold crystallization was observed in PHBV based blends, while the melting crystallization shifted to higher temperature in PP based blends. The lignin acetate and propionate blends were partially miscible showing two-stage glass transitions by thermal mechanical analysis. Esterification led to more uniform dispersion of lignin in the plastic matrix. The frequency of PHBV spherulites increased and their size decreased from 700 mu m to less than 100 mu m with addition of lignin acetate and propionate. Lignin hexanoate blends showed a T-g depression and smaller dynamic elastic and viscous moduli than the other lignin esters, suggesting that it acted as a plasticizer. (C) 2016 Elsevier B.V. All rights reserved.