Two-Dimensional Reverse-Time Migration Applied to GPR With a 3-D-to-2-D Data Conversion

Reverse-time migration (RTM) has shown its advantages over other conventional migration algorithms for ground-penetrating radar (GPR) imaging. RTM is preferred to be implemented in the computationally attractive 2-D domain, whereas a real measurement can only be conducted in a 3-D domain. Thus, we propose an asymptotic 3-D-to-2-D data conversion filter in the frequency domain for preprocessing of the recorded data for 2-D RTM. The accuracy of the data conversion filter is verified by two numerical tests on a homogeneous and a layered model. Then, we evaluate the effectiveness of the data conversion filter on the imaging result of 2-D RTM, which is applied to simulated multioffset GPR data from a buried pipe model. With the filter, subsurface image by the 2-D RTM matches better with the 3-D RTM result especially in the aspect of phase congruency. Therefore, we conclude that this data conversion filter is necessary for 2-D RTM. We also conducted a laboratory experiment on a volcanic ash pit using a multiinput-multioutput GPR system, which is adopted on the Chang-E 5 lunar exploration lander and works in a stationary mode. The 3-D-to-2-D data conversion filter is applied to the measured multioffset GPR data before the 2-D RTM. The imaging results demonstrate that three marble slabs buried at different depths up to 2 m are clearly imaged.