Related references
Note: Only part of the references are listed.High throughput direct 3D bioprinting in multiwell plates
Henry H. Hwang et al.
BIOFABRICATION (2021)
Recent Advances in 4D Bioprinting
Qingzhen Yang et al.
BIOTECHNOLOGY JOURNAL (2020)
Biofabrication of neural microphysiological systems using magnetic spheroid bioprinting
Devon A. Bowser et al.
BIOFABRICATION (2020)
Three Dimensional Bioprinting of a Vascularized and Perfusable Skin Graft Using Human Keratinocytes, Fibroblasts, Pericytes, and Endothelial Cells
Tania Baltazar et al.
TISSUE ENGINEERING PART A (2020)
Intraoperative Bioprinting: Repairing Tissues and Organs in a Surgical Setting
Yang Wu et al.
TRENDS IN BIOTECHNOLOGY (2020)
Dynamic Bioinks to Advance Bioprinting
Francis L. C. Morgan et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Bioprinting: From Tissue and Organ Development to in Vitro Models
Carlos Mota et al.
CHEMICAL REVIEWS (2020)
Immersion Bioprinting of Tumor Organoids in Multi-Well Plates for Increasing Chemotherapy Screening Throughput
Erin Maloney et al.
MICROMACHINES (2020)
High-throughput fabrication of vascularized adipose microtissues for 3D bioprinting
Lara Benmeridja et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2020)
3D printing of Haversian bone-mimicking scaffolds for multicellular delivery in bone regeneration
Meng Zhang et al.
SCIENCE ADVANCES (2020)
Diabetic Foot Ulcer Regeneration Platform Based on 4D Bioprinting Technology
Jeehee Kim
DIABETES (2020)
Noninvasive in vivo 3D bioprinting
Yuwen Chen et al.
SCIENCE ADVANCES (2020)
Preliminary engineering forin situ in vivobioprinting: a novel micro bioprinting platform forin situ in vivobioprinting at a gastric wound site
Wenxiang Zhao et al.
BIOFABRICATION (2020)
3D Bioprinting of shear-thinning hybrid bioinks with excellent bioactivity derived from gellan/alginate and thixotropic magnesium phosphate-based gels
You Chen et al.
JOURNAL OF MATERIALS CHEMISTRY B (2020)
Functionalizing bioinks for 3D bioprinting applications
Azraa Parak et al.
DRUG DISCOVERY TODAY (2019)
Renal reabsorption in 3D vascularized proximal tubule models
Neil Y. C. Lin et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)
In Situ Bioprinting of Autologous Skin Cells Accelerates Wound Healing of Extensive Excisional Full-Thickness Wounds
Mohammed Albanna et al.
SCIENTIFIC REPORTS (2019)
Three-Dimensionally Printed Hyperelastic Bone Scaffolds Accelerate Bone Regeneration in Critical-Size Calvarial Bone Defects
Yu-Hui Huang et al.
PLASTIC AND RECONSTRUCTIVE SURGERY (2019)
BIOMEDICINE Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Bagrat Grigoryan et al.
SCIENCE (2019)
Fully Three-Dimensional Bioprinted Skin Equivalent Constructs with Validated Morphology and Barrier Function
Kristy Derr et al.
TISSUE ENGINEERING PART C-METHODS (2019)
3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Nadav Noor et al.
ADVANCED SCIENCE (2019)
3D Printing Artificial Blood Vessel Constructs Using PCL/Chitosan/Hydrogel Biocomposites
Songul Ulag et al.
CHEMISTRYSELECT (2019)
Layer-by-layer ultraviolet assisted extrusion-based (UAE) bioprinting of hydrogel constructs with high aspect ratio for soft tissue engineering applications
Pei Zhuang et al.
PLOS ONE (2019)
A 3D bioprinter platform for mechanistic analysis of tumoroids and chimeric mammary organoids
John A. Reid et al.
SCIENTIFIC REPORTS (2019)
A Layer-by-Layer Single-Cell Coating Technique To Produce Injectable Beating Mini Heart Tissues via Microfluidics
Luis P. B. Guerzoni et al.
BIOMACROMOLECULES (2019)
Bioprinting functional tissues
Ashley N. Leberfinger et al.
ACTA BIOMATERIALIA (2019)
Evaluation of Spheroid 3D Culture Methods to Study a Pancreatic Neuroendocrine Neoplasm Cell Line
Giulia Bresciani et al.
FRONTIERS IN ENDOCRINOLOGY (2019)
Bioprinted liver provides early insight into the role of Kupffer cells in TGF-β1 and methotrexate-induced fibrogenesis
Leah M. Norona et al.
PLOS ONE (2019)
Modeling Tumor Phenotypes In Vitro with Three-Dimensional Bioprinting
Ellen M. Langer et al.
CELL REPORTS (2019)
3D Printing of Neural Tissues Derived from Human Induced Pluripotent Stem Cells Using a Fibrin-Based Bioink
Emily Abelseth et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Laser-based 3D bioprinting for spatial and size control of tumor spheroids and embryoid bodies
David M. Kingsley et al.
ACTA BIOMATERIALIA (2019)
3D-Bioprinted Mini-Brain: A Glioblastoma Model to Study Cellular Interactions and Therapeutics
Marcel Alexander Heinrich et al.
ADVANCED MATERIALS (2019)
In situ prevascularization designed by laser-assisted bioprinting: effect on bone regeneration
Olivia Kerouredan et al.
BIOFABRICATION (2019)
Individual cell-only bioink and photocurable supporting medium for 3D printing and generation of engineered tissues with complex geometries
Oju Jeon et al.
MATERIALS HORIZONS (2019)
Regeneration of diaphragm with bio-3D cellular patch
Xiu-Ying Zhang et al.
BIOMATERIALS (2018)
3D bioprinting of a corneal stroma equivalent
Abigail Isaacson et al.
EXPERIMENTAL EYE RESEARCH (2018)
Prolongation of liver-specific function for primary hepatocytes maintenance in 3D printed architectures
Yohan Kim et al.
ORGANOGENESIS (2018)
Bioinks for 3D bioprinting: an overview
P. Selcan Gungor-Ozkerim et al.
BIOMATERIALS SCIENCE (2018)
In Vitro Regeneration of Patient-specific Ear-shaped Cartilage and Its First Clinical Application for Auricular Reconstruction
Guangdong Zhou et al.
EBIOMEDICINE (2018)
A Novel Microplate 3D Bioprinting Platform for the Engineering of Muscle and Tendon Tissues
Sandra Laternser et al.
SLAS TECHNOLOGY (2018)
3D Bioprinting: Airflow-Assisted 3D Bioprinting of Human Heterogeneous Microspheroidal Organoids with Microfluidic Nozzle (Small 39/2018)
Haiming Zhao et al.
Small (2018)
Developments with 3D bioprinting for novel drug discovery
Aishwarya Satpathy et al.
EXPERT OPINION ON DRUG DISCOVERY (2018)
Bioprinted 3D Primary Human Intestinal Tissues Model Aspects of Native Physiology and ADME/Tox Functions
Lauran R. Madden et al.
ISCIENCE (2018)
Printing of Three-Dimensional Tissue Analogs for Regenerative Medicine
Vivian K. Lee et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Human Skin 3D Bioprinting Using Scaffold-Free Approach
Lea J. Pourchet et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Fabrication of 3D-culture platform with sandwich architecture for preserving liver-specific functions of hepatocytes using 3D bioprinter
Kenichi Arai et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Batzaya Byambaa et al.
ADVANCED HEALTHCARE MATERIALS (2017)
3D Printing of Artificial Blood Vessel: Study on Multi-Parameter Optimization Design for Vascular Molding Effect in Alginate and Gelatin
Huanbao Liu et al.
MICROMACHINES (2017)
Hanging Drop, A Best Three-Dimensional (3D) Culture Method for Primary Buffalo and Sheep Hepatocytes
Meena Shri et al.
SCIENTIFIC REPORTS (2017)
Embedded Spheroids as Models of the Cancer Microenvironment
Kristie M. Tevis et al.
ADVANCED BIOSYSTEMS (2017)
Microfluidic-enhanced 3D bioprinting of aligned myoblast-laden hydrogels leads to functionally organized myofibers in vitro and in vivo
Marco Costantini et al.
BIOMATERIALS (2017)
Direct 3D cell-printing of human skin with functional transwell system
Byoung Soo Kim et al.
BIOFABRICATION (2017)
Microfl uidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink
Cristina Colosi et al.
ADVANCED MATERIALS (2016)
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Tomasz Jungst et al.
CHEMICAL REVIEWS (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Xuanyi Ma et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Advancing biomaterials of human origin for tissue engineering
Fa-Ming Chen et al.
PROGRESS IN POLYMER SCIENCE (2016)
Characterization of the crosslinking kinetics of multi-arm poly(ethylene glycol) hydrogels formed via Michael-type addition
Jiwon Kim et al.
SOFT MATTER (2016)
Modeling Compound-Induced Fibrogenesis In Vitro Using Three-Dimensional Bioprinted Human Liver Tissues
Leah M. Norona et al.
TOXICOLOGICAL SCIENCES (2016)
Design and Printing Strategies in 3D Bioprinting of Cell-Hydrogels: A Review
Jia Min Lee et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Bioprinted 3D Primary Liver Tissues Allow Assessment of Organ-Level Response to Clinical Drug Induced Toxicity In Vitro
Deborah G. Nguyen et al.
PLOS ONE (2016)
Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects
Seyed-Iman Roohani-Esfahani et al.
SCIENTIFIC REPORTS (2016)
Multifunctional 3D printing of heterogeneous hydrogel structures
Ali Nadernezhad et al.
SCIENTIFIC REPORTS (2016)
A liver-on-a-chip platform with bioprinted hepatic spheroids
Nupura S. Bhise et al.
BIOFABRICATION (2016)
Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering
Jin Woo Lee et al.
BIOFABRICATION (2016)
Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels
Christopher B. Highley et al.
ADVANCED MATERIALS (2015)
A Multimaterial Bioink Method for 3D Printing Tunable, Cell-Compatible Hydrogels
Alexandra L. Rutz et al.
ADVANCED MATERIALS (2015)
3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications
Kajsa Markstedt et al.
BIOMACROMOLECULES (2015)
World meat consumption patterns: An overview of the last fifty years (1961-2011)
P. Sans et al.
MEAT SCIENCE (2015)
Bioprinting scale-up tissue and organ constructs for transplantation
Ibrahim T. Ozbolat
TRENDS IN BIOTECHNOLOGY (2015)
Cultured meat from muscle stem cells: A review of challenges and prospects
Isam T. Kadim et al.
JOURNAL OF INTEGRATIVE AGRICULTURE (2015)
In vitro meat production: Challenges and benefits over conventional meat production
Zuhaib Fayaz Bhat et al.
JOURNAL OF INTEGRATIVE AGRICULTURE (2015)
Three-dimensional fabrication of cell-laden biodegradable poly(ethylene glycol-co-depsipeptide) hydrogels by visible light stereolithographye
Laura Elomaa et al.
JOURNAL OF MATERIALS CHEMISTRY B (2015)
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
D. M. Kirchmajer et al.
JOURNAL OF MATERIALS CHEMISTRY B (2015)
Biomaterials for Integration with 3-D Bioprinting
Aleksander Skardal et al.
ANNALS OF BIOMEDICAL ENGINEERING (2015)
Engineering an in vitro air-blood barrier by 3D bioprinting
Lenke Horvath et al.
SCIENTIFIC REPORTS (2015)
A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks
Zongjie Wang et al.
BIOFABRICATION (2015)
Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells
B. Duan et al.
ACTA BIOMATERIALIA (2014)
Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation
Dong-Woo Jang et al.
ASAIO JOURNAL (2014)
Bioprinting Technology: A Current State-of-the-Art Review
Amer B. Dababneh et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Induction of bone formation in biphasic calcium phosphate scaffolds by bone morphogenetic protein-2 and primary osteoblasts
L. A. Strobel et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2014)
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Vivian Lee et al.
TISSUE ENGINEERING PART C-METHODS (2014)
Alginate gelation-induced cell death during laser-assisted cell printing
Hemanth Gudapati et al.
BIOFABRICATION (2014)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology
Tao Xu et al.
BIOMATERIALS (2013)
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ibrahim T. Ozbolat et al.
IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2013)
Evaluation of hydrogels for bio-printing applications
Sean V. Murphy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Novel aspects of health promoting compounds in meat
J. F. Young et al.
MEAT SCIENCE (2013)
Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications
Tao Xu et al.
BIOFABRICATION (2013)
Skin tissue generation by laser cell printing
Lothar Koch et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system
Jin-Hyung Shim et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
Preventing hypoxia-induced cell death in beta cells and islets via hydrolytically activated, oxygen-generating biomaterials
Eileen Pedraza et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)
Three-dimensional microfluidic model for tumor cell intravasation and endothelial barrier function
Ioannis K. Zervantonakis et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)
Oxygen Gas-Filled Microparticles Provide Intravenous Oxygen Delivery
John N. Kheir et al.
SCIENCE TRANSLATIONAL MEDICINE (2012)
Engineering Complex Tissues
Anthony Atala et al.
SCIENCE TRANSLATIONAL MEDICINE (2012)
Shear-thinning hydrogels for biomedical applications
Murat Guvendiren et al.
SOFT MATTER (2012)
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Xiaofeng Cui et al.
TISSUE ENGINEERING PART A (2012)
Stem cell integrins: Implications for ex-vivo culture and cellular therapies
Andrew B. J. Prowse et al.
STEM CELL RESEARCH (2011)
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Bertrand Guillotin et al.
BIOMATERIALS (2010)
Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation
Vincent Chan et al.
LAB ON A CHIP (2010)
Layer by Layer Three-Dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets
SangJun Moon et al.
TISSUE ENGINEERING PART C-METHODS (2010)
Laser-based direct-write techniques for cell printing
Nathan R. Schiele et al.
BIOFABRICATION (2010)
Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication
Wonhye Lee et al.
BIOMATERIALS (2009)
Human microvasculature fabrication using thermal inkjet printing technology
Xiaofeng Cui et al.
BIOMATERIALS (2009)
Organ printing: Tissue spheroids as building blocks
Vladimir Mironov et al.
BIOMATERIALS (2009)
Recent advances in three-dimensional multicellular spheroid culture for biomedical research
Ruei-Zhen Lin et al.
Biotechnology Journal (2008)
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Brian Derby
JOURNAL OF MATERIALS CHEMISTRY (2008)
Organ printing: promises and challenges
Vladimir Mironov et al.
REGENERATIVE MEDICINE (2008)
Direct cell writing of 3D microorgan for in vitro pharmacokinetic model
Robert Chang et al.
TISSUE ENGINEERING PART C-METHODS (2008)
Vascularization in tissue engineering
Jeroen Rouwkema et al.
TRENDS IN BIOTECHNOLOGY (2008)
Effects of Dispensing Pressure and Nozzle Diameter on Cell Survival from Solid Freeform Fabrication–Based Direct Cell Writing
Robert Chang et al.
Tissue engineering. Part A (2007)
Matrix elasticity directs stem cell lineage specification
Adam J. Engler et al.
CELL (2006)
Engineering of vascularized transplantable bone tissues:: Induction of axial vascularization in an osteoconductive matrix using an arteriovenous loop
Ulrich Kneser et al.
TISSUE ENGINEERING (2006)
Myotubes differentiate optimally on substrates with tissue-like stiffness:: pathological implications for soft or stiff microenvironments
AJ Engler et al.
JOURNAL OF CELL BIOLOGY (2004)
The effect of PEGT/PBT scaffold architecture on oxygen gradients in tissue engineered cartilaginous constructs
J Malda et al.
BIOMATERIALS (2004)
Current methods for assaying angiogenesis in vitro and in vivo
CA Staton et al.
INTERNATIONAL JOURNAL OF EXPERIMENTAL PATHOLOGY (2004)
Inkjet printing for materials and devices
P Calvert
CHEMISTRY OF MATERIALS (2001)
Angiogenesis in cancer and other diseases
P Carmeliet et al.
NATURE (2000)
Share Paper
