Journal
GEOPHYSICAL JOURNAL INTERNATIONAL
Volume 224, Issue 3, Pages 1523-1539Publisher
OXFORD UNIV PRESS
DOI: 10.1093/gji/ggaa532
Keywords
Microstructure; Permeability and porosity; Hydrogeophysics
Categories
Funding
- Swiss Federal Nuclear Safety Inspectorate ENSI
Ask authors/readers for more resources
This paper presents a comparative laboratory study of different methods to determine the water permeability of saturated Opalinus Clay, and found the results obtained by different methods differ less than 15 percent. The pore pressure oscillation technique appears to be the most efficient in terms of experimental handling and data density, providing continuous data on permeability and storativity over a user-defined period of time.
A comprehensive characterization o f clay shale behavior requires quantifying both geomechanical and hydromechanical characteristics. This paper presents a comparative laboratory study of different methods to determine the water permeability of saturated Opalinus Clay: (i) pore pressure oscillation, (ii) pressure pulse decay and (iii) pore pressure equilibration. Based on a comprehensive data set obtained on one sample under well-defined temperature and isostatic effective stress conditions, we discuss the sensitivity of permeability and storativity on the experimental boundary conditions (oscillation frequency, pore pressure amplitudes and effective stress). The results show that permeability coefficients obtained by all three methods differ less than 15 per cent at a constant effective stress of 24 MPa (k(mean) = 6.6E-21 to 7.5E-21 m(2)). The pore pressure transmission technique tends towards lower permeability coefficients, whereas the pulse decay and pressure oscillation techniques result in slightly higher values. The discrepancies are considered minor and experimental times of the techniques arc similar in the range of 1-2 d for this sample. We found that permeability coefficients determined by the pore pressure oscillation technique increase with higher frequencies, that is oscillation periods shorter than 2 hr. No dependence is found for the applied pressure amplitudes (5, 10 and 25 per cent of the mean pore pressure). By means of experimental handling and data density, the pore pressure oscillation technique appears to be the most efficient. Data can be recorded continuously over a user-defined period of time and yield information on both, permeability and storativity. Furthermore, effective stress conditions can be held constant during the test and pressure equilibration prior to testing is not necessary. Electron microscopic imaging of ion-beam polished surfaces before and after testing suggests that testing at effective stresses higher than in situ did not lead to pore significant collapse or other irreversible damage in the samples. The study also shows that unloading during the experiment did not result in a permeability increase, which is associated to the persistent closure of microcracks at effective stresses between 24 and 6 MPa.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available