Related references
Note: Only part of the references are listed.Three-dimensional bioprinted hepatorganoids prolong survival of mice with liver failure
Huayu Yang et al.
GUT (2021)
Pluripotent-Stem-Cell-Derived Hepatic Cells: Hepatocytes and Organoids for Liver Therapy and Regeneration
Antonietta Messina et al.
CELLS (2020)
In Situ Expansion, Differentiation, and Electromechanical Coupling of Human Cardiac Muscle in a 3D Bioprinted, Chambered Organoid
Molly E. Kupfer et al.
CIRCULATION RESEARCH (2020)
Dynamic Characterization of Structural, Molecular, and Electrophysiological Phenotypes of Human-Induced Pluripotent Stem Cell-Derived Cerebral Organoids, and Comparison with Fetal and Adult Gene Profiles
Sarah Logan et al.
CELLS (2020)
Tissue Engineering Using Vascular Organoids From Human Pluripotent Stem Cell Derived Mural Cell Phenotypes
Maria Markou et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Liver sinusoidal endothelial cells promote the differentiation and survival of mouse vascularised hepatobiliary organoids
Kiryu K. Yap et al.
BIOMATERIALS (2020)
A Tissue-Engineered 3D Microvessel Model Reveals the Dynamics of Mosaic Vessel Formation in Breast Cancer
Vanesa L. Silvestri et al.
CANCER RESEARCH (2020)
Injectable Therapeutic Organoids Using Sacrificial Hydrogels
Ninna S. Rossen et al.
ISCIENCE (2020)
Successful Introduction of Human Renovascular Units into the Mammalian Kidney
Oren Pleniceanu et al.
JOURNAL OF THE AMERICAN SOCIETY OF NEPHROLOGY (2020)
Multicellular 3D Neurovascular Unit Model for Assessing Hypoxia and Neuroinflammation Induced Blood-Brain Barrier Dysfunction
Goodwell Nzou et al.
SCIENTIFIC REPORTS (2020)
Engineered Perineural Vascular Plexus for Modeling Developmental Toxicity
Gaurav Kaushik et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix
Claire Yu et al.
BIOMATERIALS (2019)
Aligned Brain Extracellular Matrix Promotes Differentiation and Myelination of Human-Induced Pluripotent Stem Cell-Derived Oligodendrocytes
Ann-Na Cho et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Bovine colon organoids: From 3D bioprinting to cryopreserved multi-well screening platforms
Elfi Topfer et al.
TOXICOLOGY IN VITRO (2019)
Fabrication of 3D scaffolds reproducing intestinal epithelium topography by high-resolution 3D stereolithography
Justine Creff et al.
BIOMATERIALS (2019)
Generation of blood vessel organoids from human pluripotent stem cells
Reiner A. Wimmer et al.
NATURE PROTOCOLS (2019)
Co-axial wet-spinning in 3D bioprinting: state of the art and future perspective of microfluidic integration
Marco Costantini et al.
BIOFABRICATION (2019)
Human stem cell based corneal tissue mimicking structures using laser-assisted 3D bioprinting and functional bioinks
Anni Sorkio et al.
BIOMATERIALS (2018)
A visible light-curable yet visible wavelength-transparent resin for stereolithography 3D printing
Hong Key Park et al.
NPG ASIA MATERIALS (2018)
Generation of a 3D Liver Model Comprising Human Extracellular Matrix in an Alginate/Gelatin-Based Bioink by Extrusion Bioprinting for Infection and Transduction Studies
Thomas Hiller et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)
Laser bioprinting of human induced pluripotent stem cells-the effect of printing and biomaterials on cell survival, pluripotency, and differentiation
Lothar Koch et al.
BIOFABRICATION (2018)
Alginate Sulfate-Nanocellulose Bioinks for Cartilage Bioprinting Applications
Michael Mueller et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Regeneration of the entire human epidermis using transgenic stem cells
Tobias Hirsch et al.
NATURE (2017)
3D Bioprinting Human Induced Pluripotent Stem Cell Constructs for In Situ Cell Proliferation and Successive Multilineage Differentiation
Qi Gu et al.
ADVANCED HEALTHCARE MATERIALS (2017)
3D Proximal Tubule Tissues Recapitulate Key Aspects of Renal Physiology to Enable Nephrotoxicity Testing
Shelby M. King et al.
FRONTIERS IN PHYSIOLOGY (2017)
Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink
Duong Nguyen et al.
SCIENTIFIC REPORTS (2017)
Development of Liver Decellularized Extracellular Matrix Bioink for Three-Dimensional Cell Printing-Based Liver Tissue Engineering
Hyungseok Lee et al.
BIOMACROMOLECULES (2017)
Modeling Development and Disease with Organoids
Hans Clevers
CELL (2016)
Bio-printing cell-laden Matrigel-agarose constructs
Rong Fan et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2016)
Differentiation of Induced Pluripotent Stem Cells to Neural Retinal Precursor Cells on Porous Poly-Lactic-co-Glycolic Acid Scaffolds
Kristan S. Worthington et al.
JOURNAL OF OCULAR PHARMACOLOGY AND THERAPEUTICS (2016)
Designer matrices for intestinal stem cell and organoid culture
Nikolce Glorevski et al.
NATURE (2016)
Defined three-dimensional microenvironments boost induction of pluripotency
Massimiliano Caiazzo et al.
NATURE MATERIALS (2016)
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Xuanyi Ma et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
A hydrogel bioink toolkit for mimicking native tissue biochemical and mechanical properties in bioprinted tissue constructs
Aleksander Skardal et al.
ACTA BIOMATERIALIA (2015)
Long-Term Culture of Genome-Stable Bipotent Stem Cells from Adult Human Liver
Meritxell Huch et al.
CELL (2015)
Modeling mouse and human development using organoid cultures
Meritxell Huch et al.
DEVELOPMENT (2015)
In Vitro Expansion of Human Gastric Epithelial Stem Cells and Their Responses to Bacterial Infection
Sina Bartfeld et al.
GASTROENTEROLOGY (2015)
An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering
Joydip Kundu et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2015)
Bioprinting of human pluripotent stem cells and their directed differentiation into hepatocyte-like cells for the generation of mini-livers in 3D
Alan Faulkner-Jones et al.
BIOFABRICATION (2015)
3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
David B. Kolesky et al.
ADVANCED MATERIALS (2014)
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Falguni Pati et al.
NATURE COMMUNICATIONS (2014)
Laser Assisted Cell Printing
L. Koch et al.
CURRENT PHARMACEUTICAL BIOTECHNOLOGY (2013)
In vitro organogenesis in three dimensions: self-organising stem cells
Yoshiki Sasai et al.
DEVELOPMENT (2012)
Effect of laser energy, substrate film thickness and bioink viscosity on viability of endothelial cells printed by Laser-Assisted Bioprinting
Sylvain Catros et al.
APPLIED SURFACE SCIENCE (2011)
The maintenance of pluripotency following laser direct-write of mouse embryonic stem cells
Nurazhani Abdul Raof et al.
BIOMATERIALS (2011)
Adipogenic differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cells
M. Gruene et al.
BIOFABRICATION (2011)
Towards organ printing: engineering an intra-organ branched vascular tree
Richard P. Visconti et al.
EXPERT OPINION ON BIOLOGICAL THERAPY (2010)
Scaffold-free vascular tissue engineering using bioprinting
Cyrille Norotte et al.
BIOMATERIALS (2009)
Development of a Three-Dimensional Bioprinter: Construction of Cell Supporting Structures Using Hydrogel and State-Of-The-Art Inkjet Technology
Yuichi Nishiyama et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2009)
Single Lgr5 stem cells build crypt-villus structures in vitro without a mesenchymal niche
Toshiro Sato et al.
NATURE (2009)
Dynamics of the self-assembly of complex cellular aggregates on micromolded nonadhesive hydrogels
Anthony P. Napolitano et al.
TISSUE ENGINEERING (2007)
Fabrication of microfluidic hydrogels using molded gelatin as a sacrificial element
Andrew P. Golden et al.
LAB ON A CHIP (2007)
Polymeric system for dual growth factor delivery
TP Richardson et al.
NATURE BIOTECHNOLOGY (2001)
Share Paper
