Related references
Note: Only part of the references are listed.14.46% Efficiency small molecule organic photovoltaics enabled by the well trade-off between phase separation and photon harvesting
Chunyu Xu et al.
JOURNAL OF ENERGY CHEMISTRY (2021)
A ternary organic solar cell with 300 nm thick active layer shows over 14% efficiency
Lijiao Ma et al.
SCIENCE CHINA-CHEMISTRY (2020)
Achieving Efficient Thick Film All-polymer Solar Cells Using a Green Solvent Additive
Zhen-Ye Li et al.
CHINESE JOURNAL OF POLYMER SCIENCE (2020)
Thick-Film Organic Solar Cells Achieving over 11% Efficiency and Nearly 70% Fill Factor at Thickness over 400 nm
Wei Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Organoboron Polymer for 10% Efficiency All-Polymer Solar Cells
Ruyan Zhao et al.
CHEMISTRY OF MATERIALS (2020)
High-Efficiency Nonfullerene Organic Solar Cells Enabled by 1000 nm Thick Active Layers with a Low Trap-State Density
Lijiao Ma et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
Yong Cui et al.
ADVANCED MATERIALS (2020)
Highly Efficient All-Small-Molecule Organic Solar Cells with Appropriate Active Layer Morphology by Side Chain Engineering of Donor Molecules and Thermal Annealing
Beibei Qiu et al.
ADVANCED MATERIALS (2020)
Highly Efficient Large-Area Organic Photovoltaic Module with a 350 nm Thick Active Layer Using a Random Terpolymer Donor
So Hyun Park et al.
CHEMISTRY OF MATERIALS (2020)
Over 15.7% Efficiency of Ternary Organic Solar Cells by Employing Two Compatible Acceptors with Similar LUMO Levels
Zhenghao Hu et al.
SMALL (2020)
n-Type Molecular Photovoltaic Materials: Design Strategies and Device Applications
Qihui Yue et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)
14.4% efficiency all-polymer solar cell with broad absorption and low energy loss enabled by a novel polymer acceptor
Tao Jia et al.
NANO ENERGY (2020)
Achieving Eco-Compatible Organic Solar Cells with Efficiency >16.5% Based on an Iridium Complex-Incorporated Polymer Donor
Rui Sun et al.
SOLAR RRL (2020)
On the recombination order of surface recombination under open circuit conditions
Joachim Vollbrecht et al.
ORGANIC ELECTRONICS (2020)
Delicate Morphology Control Triggers 14.7% Efficiency All-Small-Molecule Organic Solar Cells
Hua Tang et al.
ADVANCED ENERGY MATERIALS (2020)
A Critical Review on Efficient Thick-Film Organic Solar Cells
Jinhua Gao et al.
SOLAR RRL (2020)
High-Efficiency Organic Solar Cells with Wide Toleration of Active Layer Thickness
Kangkang Weng et al.
SOLAR RRL (2020)
A critical review on semitransparent organic solar cells
Zhenghao Hu et al.
NANO ENERGY (2020)
Tailoring non-fullerene acceptors using selenium-incorporated heterocycles for organic solar cells with over 16% efficiency
Han Yu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Recent advances in non-fullerene organic solar cells: from lab to fab
Lijiao Ma et al.
CHEMICAL COMMUNICATIONS (2020)
Two compatible polymer donors contribute synergistically for ternary organic solar cells with 17.53% efficiency
Qiaoshi An et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
Design of narrow bandgap non-fullerene acceptors for photovoltaic applications and investigation of non-geminate recombination dynamics
Joachim Vollbrecht et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Precise molecular design for BN-modified polycyclic aromatic hydrocarbons toward mechanochromic materials
Huanan Huang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Precisely Controlling the Position of Bromine on the End Group Enables Well-Regular Polymer Acceptors for All-Polymer Solar Cells with Efficiencies over 15%
Zhenghui Luo et al.
ADVANCED MATERIALS (2020)
π-Conjugated polymers and molecules enabling small photon energy loss simultaneously with high efficiency in organic photovoltaics
Masahiko Saito et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Efficient and Mechanically Robust Ultraflexible Organic Solar Cells Based on Mixed Acceptors
Wenchao Huang et al.
JOULE (2020)
Extraordinarily long diffusion length in PM6:Y6 organic solar cells
Nurlan Tokmoldin et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Bandgap Tailored Nonfullerene Acceptors for Low-Energy-Loss Near-Infrared Organic Photovoltaics
Jaewon Lee et al.
ACS MATERIALS LETTERS (2020)
Hole transport layers for organic solar cells: recent progress and prospects
Haitao Xu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Diverse applications of MoO3 for high performance organic photovoltaics: fundamentals, processes and optimization strategies
Yongshuai Gong et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Over 17% efficiency ternary organic solar cells enabled by two non-fullerene acceptors working in an alloy-like model
Lingling Zhan et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
Over 14.5% efficiency and 71.6% fill factor of ternary organic solar cells with 300 nm thick active layers
Jinhua Gao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
Polymer Donors for High-Performance Non-Fullerene Organic Solar Cells
Huiting Fu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Achieving Thickness-Insensitive Morphology of the Photoactive Layer for Printable Organic Photovoltaic Cells via Side Chain Engineering in Nonfullerene Acceptors
Seongyu Lee et al.
ADVANCED ENERGY MATERIALS (2019)
Hydrogen Bond Induced Green Solvent Processed High Performance Ternary Organic Solar Cells with Good Tolerance on Film Thickness and Blend Ratios
Xiaoyang Du et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Miscibility Tuning for Optimizing Phase Separation and Vertical Distribution toward Highly Efficient Organic Solar Cells
Lifu Zhang et al.
ADVANCED SCIENCE (2019)
Side-Chain Engineering of Nonfullerene Acceptors for Near-Infrared Organic Photodetectors and Photovoltaics
Jaewon Lee et al.
ACS ENERGY LETTERS (2019)
Molecular Orientation Unified Nonfullerene Acceptor Enabling 14% Efficiency As-Cast Organic Solar Cells
Haohao Feng et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Solution-Processed Semitransparent Organic Photovoltaics: From Molecular Design to Device Performance
Viktor V. Brus et al.
ADVANCED MATERIALS (2019)
Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Changyeon Lee et al.
CHEMICAL REVIEWS (2019)
Quantifying the Nongeminate Recombination Dynamics in Nonfullerene Bulk Heterojunction Organic Solar Cells
Joachim Vollbrecht et al.
ADVANCED ENERGY MATERIALS (2019)
A Narrow-Bandgap n-Type Polymer Semiconductor Enabling Efficient All-Polymer Solar Cells
Shengbin Shi et al.
ADVANCED MATERIALS (2019)
Impact of a Doping-Induced Space-Charge Region on the Collection of Photogenerated Charge Carriers in Thin-Film Solar Cells Based on Low-Mobility Semiconductors
Oskar J. Sandberg et al.
PHYSICAL REVIEW APPLIED (2019)
Donor Derivative Incorporation: An Effective Strategy toward High Performance All-Small-Molecule Ternary Organic Solar Cells
Hua Tang et al.
ADVANCED SCIENCE (2019)
Understanding the High Performance of over 15% Efficiency in Single-Junction Bulk Heterojunction Organic Solar Cells
Akchheta Karki et al.
ADVANCED MATERIALS (2019)
Surpassing the 10% efficiency milestone for 1-cm2 all-polymer solar cells
Baobing Fan et al.
NATURE COMMUNICATIONS (2019)
Tail state limited photocurrent collection of thick photoactive layers in organic solar cells
Jiaying Wu et al.
NATURE COMMUNICATIONS (2019)
Controlling Molecular Packing and Orientation via Constructing a Ladder-Type Electron Acceptor with Asymmetric Substituents for Thick-Film Nonfullerene Solar Cells
Shiyu Feng et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
High Performance Thick-Film Nonfullerene Organic Solar Cells with Efficiency over 10% and Active Layer Thickness of 600 nm
Yamin Zhang et al.
ADVANCED ENERGY MATERIALS (2019)
Higher Mobility and Carrier Lifetimes in Solution-Processable Small-Molecule Ternary Solar Cells with 11% Efficiency
Ru-Ze Liang et al.
ADVANCED ENERGY MATERIALS (2019)
High face-on ratio isoindigo copolymers with extended nano-fibrillar networks in fullerene-based thick (>300 nm) photovoltaics achieving a high efficiency of 10.7%
Song-Fu Liao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
A generic green solvent concept boosting the power conversion efficiency of all-polymer solar cells to 11%
Zhenye Li et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Thick-Film High-Performance Solar Cells with a C60-Containing Polystyrene Additive
Byongkyu Lee et al.
SOLAR RRL (2019)
Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core
Jun Yuan et al.
JOULE (2019)
Ternary Organic Solar Cells with > 11% Efficiency Incorporating Thick Photoactive Layer and Nonfullerene Small Molecule Acceptor
Tong Zhang et al.
ADVANCED ENERGY MATERIALS (2018)
Modulating Molecular Orientation Enables Efficient Nonfullerene Small-Molecule Organic Solar Cells
Liyan Yang et al.
CHEMISTRY OF MATERIALS (2018)
Organic solar cells based on non-fullerene acceptors
Jianhui Hou et al.
NATURE MATERIALS (2018)
Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency
Qunping Fan et al.
SCIENCE CHINA-CHEMISTRY (2018)
Side-Chain Impact on Molecular Orientation of Organic Semiconductor Acceptors: High Performance Nonfullerene Polymer Solar Cells with Thick Active Layer over 400 nm
Zhenghui Luo et al.
ADVANCED ENERGY MATERIALS (2018)
A Thieno[3,2-c]Isoquinolin-5(4H)-One Building Block for Efficient Thick-Film Solar Cells
Dan Li et al.
ADVANCED ENERGY MATERIALS (2018)
Low temperature processed high-performance thick film ternary polymer solar cell with enhanced stability
Manjun Xiao et al.
NANO ENERGY (2018)
Chlorine substituted 2D-conjugated polymer for high-performance polymer solar cells with 13.1% efficiency via toluene processing
Qunping Fan et al.
NANO ENERGY (2018)
Efficient Non-Fullerene Organic Photovoltaic Modules Incorporating As-Cast and Thickness-Insensitive Photoactive Layers
Tong Zhang et al.
ADVANCED ENERGY MATERIALS (2018)
Balance Between Light Absorption and Recombination Losses in Solution-Processed Small Molecule Solar Cells with Normal or Inverted Structures
Viktor V. Brus et al.
ADVANCED ENERGY MATERIALS (2018)
High-efficiency small-molecule ternary solar cells with a hierarchical morphology enabled by synergizing fullerene and non-fullerene acceptors
Zichun Zhou et al.
NATURE ENERGY (2018)
Selenopheno[3,2-b]thiophene-Based Narrow-Bandgap Nonfullerene Acceptor Enabling 13.3% Efficiency for Organic Solar Cells with Thickness-Insensitive Feature
Jin-Liang Wang et al.
ACS ENERGY LETTERS (2018)
High-Performance As-Cast Nonfullerene Polymer Solar Cells with Thicker Active Layer and Large Area Exceeding 11% Power Conversion Efficiency
Qunping Fan et al.
ADVANCED MATERIALS (2018)
Efficient Large Area Organic Solar Cells Processed by Blade-Coating With Single-Component Green Solvent
Kai Zhang et al.
SOLAR RRL (2018)
Achieving an Efficiency Exceeding 10% for Fullerene-based Polymer Solar Cells Employing a Thick Active Layer via Tuning Molecular Weight
Zelin Li et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Using o-Chlorobenzaldehyde as a Fast Removable Solvent Additive during Spin-Coating PTB7-Based Active Layers: High Efficiency Thick-Film Polymer Solar Cells
Jinxiang Chen et al.
ADVANCED ENERGY MATERIALS (2017)
High-performance ternary organic solar cells with thick active layer exceeding 11% efficiency
Nicola Gasparini et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Optimisation of processing solvent and molecular weight for the production of green-solvent-processed all-polymer solar cells with a power conversion efficiency over 9%
Baobing Fan et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Highly crystalline low-bandgap polymer nanowires towards high-performance thick-film organic solar cells exceeding 10% power conversion efficiency
Jaewon Lee et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
High-Performance Ternary Organic Solar Cell Enabled by a Thick Active Layer Containing a Liquid Crystalline Small Molecule Donor
Guichuan Zhang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Enhancing Performance of Large-Area Organic Solar Cells with Thick Film via Ternary Strategy
Jianqi Zhang et al.
SMALL (2017)
Thick Film Polymer Solar Cells Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole Conjugated Polymers with Efficiency over 11%
Yaocheng Jin et al.
ADVANCED ENERGY MATERIALS (2017)
Conjugated Polymers Based on Difluorobenzoxadiazole toward Practical Application of Polymer Solar Cells
Junyi Wang et al.
ADVANCED ENERGY MATERIALS (2017)
A regioregular conjugated polymer for high performance thick-film organic solar cells without processing additive
Hongliang Zhong et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Low band gap conjugated polymers combining siloxane-terminated side chains and alkyl side chains: side-chain engineering achieving a large active layer processing window for PCE > 10% in polymer solar cells
Xuncheng Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
A difluorobenzothiadiazole-based conjugated polymer with alkylthiophene as the side chains for efficient, additive-free and thick-film polymer solar cells
Mu He et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
All-Polymer Solar Cells Based on a Conjugated Polymer Containing Siloxane-Functionalized Side Chains with Efficiency over 10%
Baobing Fan et al.
ADVANCED MATERIALS (2017)
Design of a New Small-Molecule Electron Acceptor Enables Efficient Polymer Solar Cells with High Fill Factor
Sunsun Li et al.
ADVANCED MATERIALS (2017)
Effects of Bithiophene Imide Fusion on the Device Performance of Organic Thin-Film Transistors and All-Polymer Solar Cells
Yingfeng Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
Constructing a Strongly Absorbing Low-Bandgap Polymer Acceptor for High-Performance All-Polymer Solar Cells
Zhi-Guo Zhang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
Morphology control enables thickness-insensitive efficient nonfullerene polymer solar cells
Xiaoyu Liu et al.
MATERIALS CHEMISTRY FRONTIERS (2017)
Design of Donor Polymers with Strong Temperature-Dependent Aggregation Property for Efficient Organic Photovoltaics
Huawei Hu et al.
ACCOUNTS OF CHEMICAL RESEARCH (2017)
High-Performance Nonfullerene Polymer Solar Cells based on Imide-Functionalized Wide-Bandgap Polymers
Baobing Fan et al.
ADVANCED MATERIALS (2017)
Highly Efficient Organic Solar Cells Consisting of Double Bulk Heterojunction Layers
Jiang Huang et al.
ADVANCED MATERIALS (2017)
High-Performance Non-Fullerene Polymer Solar Cells Based on Fluorine Substituted Wide Bandgap Copolymers Without Extra Treatments
Qunping Fan et al.
SOLAR RRL (2017)
Chlorination of Low-Band-Gap Polymers: Toward High-Performance Polymer Solar Cells
Daize Mo et al.
CHEMISTRY OF MATERIALS (2017)
A Difluorobenzoxadiazole Building Block for Efficient Polymer Solar Cells
Jingbo Zhao et al.
ADVANCED MATERIALS (2016)
Highly Efficient Organic Solar Cells with Improved Vertical Donor-Acceptor Compositional Gradient Via an Inverted Off-Center Spinning Method
Jiang Huang et al.
ADVANCED MATERIALS (2016)
All-Polymer Solar Cells Based on Absorption-Complementary Polymer Donor and Acceptor with High Power Conversion Efficiency of 8.27%
Liang Gao et al.
ADVANCED MATERIALS (2016)
Toward Efficient Thick Active PTB7 Photovoltaic Layers Using Diphenyl Ether as a Solvent Additive
Yifan Zheng et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Photocurrent Extraction Efficiency near Unity in a Thick Polymer Bulk Heterojunction
Seo-Jin Ko et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
A Novel Naphtho[1,2-c:5,6-c′]Bis([1,2,5] Thiadiazole)-Based Narrow-Bandgap π-Conjugated Polymer with Power Conversion Efficiency Over 10%
Yaocheng Jin et al.
ADVANCED MATERIALS (2016)
Naphtho[1,2-b:5,6-b′]dithiophene-Based Small Molecules for Thick Film Organic Solar Cells with High Fill Factors
Xiangwei Zhu et al.
CHEMISTRY OF MATERIALS (2016)
Implication of Fluorine Atom on Electronic Properties, Ordering Structures, and Photovoltaic Performance in NaphthobisthiadiazoleBased Semiconducting Polymers
Kazuaki Kawashima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells
Yankang Yang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Light dependent open-circuit voltage of organic bulk heterojunction solar cells in the presence of surface recombination
V. V. Brus
ORGANIC ELECTRONICS (2016)
Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells
Dan Deng et al.
NATURE COMMUNICATIONS (2016)
Efficient ternary blend all-polymer solar cells with a polythiophene derivative as a hole-cascade material
Wenyan Su et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Efficient organic solar cells processed from hydrocarbon solvents
Jingbo Zhao et al.
NATURE ENERGY (2016)
Wide-Bandgap Benzodithiophene-Benzothiadiazole Copolymers for Highly Efficient Multijunction Polymer Solar Cells
Chunhui Duan et al.
ADVANCED MATERIALS (2015)
Fluoro-Substituted n-Type Conjugated Polymers for Additive-Free All-Polymer Bulk Heterojunction Solar Cells with High Power Conversion Efficiency of 6.71%
Jae Woong Jung et al.
ADVANCED MATERIALS (2015)
Small-Bandgap Polymer Solar Cells with Unprecedented Short-Circuit Current Density and High Fill Factor
Hyosung Choi et al.
ADVANCED MATERIALS (2015)
High-Performance Organic Solar Cells Based on a Small Molecule with Alkylthio-Thienyl-Conjugated Side Chains without Extra Treatments
Chaohua Cui et al.
ADVANCED MATERIALS (2015)
Manipulating Aggregation and Molecular Orientation in All-Polymer Photovoltaic Cells
Long Ye et al.
ADVANCED MATERIALS (2015)
The future of organic photovoltaics
Katherine A. Mazzio et al.
CHEMICAL SOCIETY REVIEWS (2015)
A General Approach toward Electron Deficient Triazole Units to Construct Conjugated Polymers for Solar Cells
Wentao Li et al.
CHEMISTRY OF MATERIALS (2015)
Efficient inverted polymer solar cells employing favourable molecular orientation
Varun Vohra et al.
NATURE PHOTONICS (2015)
Solution processed thick film organic solar cells
Chunhui Duan et al.
POLYMER CHEMISTRY (2015)
A molecular nematic liquid crystalline material for high-performance organic photovoltaics
Kuan Sun et al.
NATURE COMMUNICATIONS (2015)
High-efficiency polymer solar cells with small photon energy loss
Kazuaki Kawashima et al.
NATURE COMMUNICATIONS (2015)
Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells
Yu Zhong et al.
NATURE COMMUNICATIONS (2015)
Charge-Carrier Mobility Requirements for Bulk Heterojunction Solar Cells with High Fill Factor and External Quantum Efficiency >90%
Jonathan A. Bartelt et al.
ADVANCED ENERGY MATERIALS (2015)
Isoindigo-based low bandgap conjugated polymer for o-xylene processed efficient polymer solar cells with thick active layers
Xin Dong et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Large active layer thickness toleration of high-efficiency small molecule solar cells
Qian Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Dramatic performance enhancement for large bandgap thick-film polymer solar cells introduced by a difluorinated donor unit
Zhengke Li et al.
NANO ENERGY (2015)
Electro-Optics of Conventional and Inverted Thick Junction Organic Solar Cells
Ardalan Armin et al.
ACS PHOTONICS (2015)
Efficient, Large Area, and Thick Junction Polymer Solar Cells with Balanced Mobilities and Low Defect Densities
Ardalan Armin et al.
ADVANCED ENERGY MATERIALS (2015)
Molecular Design toward Highly Efficient Photovoltaic Polymers Based on Two-Dimensional Conjugated Benzodithiophene
Long Ye et al.
ACCOUNTS OF CHEMICAL RESEARCH (2014)
Low Band-Gap Conjugated Polymers with Strong Interchain Aggregation and Very High Hole Mobility Towards Highly Effi cient Thick- Film Polymer Solar Cells
Zhenhui Chen et al.
ADVANCED MATERIALS (2014)
Naphtho[1,2-b:5,6-b′]dithiophene Based Two-Dimensional Conjugated Polymers for Highly Efficient Thick-Film Inverted Polymer Solar Cells
Xiangwei Zhu et al.
CHEMISTRY OF MATERIALS (2014)
Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells
Zhi-Guo Zhang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device
T. L. Nguyen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
A New Tetracyclic Lactam Building Block for Thick, Broad-Bandgap Photovoltaics
Renee Kroon et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Mobility-Controlled Performance of Thick Solar Cells Based on Fluorinated Copolymers
Wentao Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Thick junction broadband organic photodiodes
Ardalan Armin et al.
LASER & PHOTONICS REVIEWS (2014)
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Yuhang Liu et al.
NATURE COMMUNICATIONS (2014)
Improving Structural Order for a High-Performance Diketopyrrolopyrrole-Based Polymer Solar Cell with a Thick Active Layer
Jing Gao et al.
ADVANCED ENERGY MATERIALS (2014)
High-Efficiency Inverted Polymer Photovoltaics via Spectrally Tuned Absorption Enhancement
Stephen Loser et al.
ADVANCED ENERGY MATERIALS (2014)
High-Performance Inverted Organic Photovoltaics with Over 1-μm Thick Active Layers
Xiaowen Hu et al.
ADVANCED ENERGY MATERIALS (2014)
Efficient Small Bandgap Polymer Solar Cells with High Fill Factors for 300 nm Thick Films
Weiwei Li et al.
ADVANCED MATERIALS (2013)
Fullerene Derivative-Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low-Bandgap Polymer (PTB7-Th) for High Performance
Sih-Hao Liao et al.
ADVANCED MATERIALS (2013)
Fluorinated Benzothiadiazole-Based Conjugated Polymers for High-Performance Polymer Solar Cells without Any Processing Additives or Post-treatments
Ning Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Naphthodithiophene-Naphthobisthiadiazole Copolymers for Solar Cells: Alkylation Drives the Polymer Backbone Flat and Promotes Efficiency
Itaru Osaka et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Synthesis of 5H-Dithieno[3,2-b:2′,3′-d]pyran as an Electron-Rich Building Block for Donor-Acceptor Type Low-Bandgap Polymers
Letian Dou et al.
MACROMOLECULES (2013)
Polymer solar cells with enhanced fill factors
Xugang Guo et al.
NATURE PHOTONICS (2013)
Four-terminal organic solar cell modules with increased annual energy yield
Robert Gehlhaar et al.
ORGANIC PHOTOVOLTAICS XIV (2013)
Improved Performance of Molecular Bulk-Heterojunction Photovoltaic Cells through Predictable Selection of Solvent Additives
Kenneth R. Graham et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Charge Formation, Recombination, and Sweep-Out Dynamics in Organic Solar Cells
Sarah R. Cowan et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Prominent Short-Circuit Currents of Fluorinated Quinoxaline-Based Copolymer Solar Cells with a Power Conversion Efficiency of 8.0%
Hsieh-Chih Chen et al.
CHEMISTRY OF MATERIALS (2012)
High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive
Xia Guo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte
Tingbin Yang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Understanding the Thickness-Dependent Performance of Organic Bulk Heterojunction Solar Cells: The Influence of Mobility, Lifetime, and Space Charge
Thomas Kirchartz et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2012)
Design, Application, and Morphology Study of a New Photovoltaic Polymer with Strong Aggregation in Solution State
Deping Qian et al.
MACROMOLECULES (2012)
Design strategies for organic semiconductors beyond the molecular formula
Zachary B. Henson et al.
NATURE CHEMISTRY (2012)
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
Zhicai He et al.
NATURE PHOTONICS (2012)
Pathways to a New Efficiency Regime for Organic Solar Cells
L. Jan Anton Koster et al.
ADVANCED ENERGY MATERIALS (2012)
Donor Acceptor Conjugated Polymer Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for High-Performance Polymer Solar Cells
Ming Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Fluorine Substituted Conjugated Polymer of Medium Band Gap Yields 7% Efficiency in Polymer-Fullerene Solar Cells
Samuel C. Price et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
Yongye Liang et al.
ADVANCED MATERIALS (2010)
Effects of active layer thickness and thermal annealing on polythiophene: Fullerene bulk heterojunction photovoltaic devices
Lichang Zeng et al.
APPLIED PHYSICS LETTERS (2010)
Charge Photogeneration in Organic Solar Cells
Tracey M. Clarke et al.
CHEMICAL REVIEWS (2010)
Polymer-Fullerene Bulk-Heterojunction Solar Cells
Gilles Dennler et al.
ADVANCED MATERIALS (2009)
Functional Oligothiophenes: Molecular Design for Multidimensional Nanoarchitectures and Their Applications
Amaresh Mishra et al.
CHEMICAL REVIEWS (2009)
Highly Efficient Solar Cell Polymers Developed via Fine-Tuning of Structural and Electronic Properties
Yongye Liang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Polymer solar cells with enhanced open-circuit voltage and efficiency
Hsiang-Yu Chen et al.
NATURE PHOTONICS (2009)
Toward a rational design of poly(2,7-carbazole) derivatives for solar cells
Nicolas Blouin et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Fluorinated organic materials for electronic and optoelectronic applications: the role of the fluorine atom
Francesco Babudri et al.
CHEMICAL COMMUNICATIONS (2007)
The effect of active layer thickness and composition on the performance of bulk-heterojunction solar cells
Adam J. Moule et al.
JOURNAL OF APPLIED PHYSICS (2006)
Charge transport and photocurrent generation in poly (3-hexylthiophene): Methanofullerene bulk-heterojunction solar cells
VD Mihailetchi et al.
ADVANCED FUNCTIONAL MATERIALS (2006)
High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends
G Li et al.
NATURE MATERIALS (2005)
Fluorine in crystal engineering - the little atom that could
K Reichenbacher et al.
CHEMICAL SOCIETY REVIEWS (2005)
Novel electroluminescent conjugated polyelectrolytes based on polyfluorene
F Huang et al.
CHEMISTRY OF MATERIALS (2004)
Share Paper
