Related references
Note: Only part of the references are listed.Achieving 16.68% efficiency ternary as-cast organic solar cells
Ruijie Ma et al.
SCIENCE CHINA-CHEMISTRY (2021)
Improving open-circuit voltage by a chlorinated polymer donor endows binary organic solar cells efficiencies over 17%
Ruijie Ma et al.
SCIENCE CHINA-CHEMISTRY (2020)
Organic tandem solar cells with 18.6% efficiency
Muath Bani Salim et al.
SOLAR ENERGY (2020)
Recent Progress in Chlorinated Organic Photovoltaic Materials
Huifeng Yao et al.
ACCOUNTS OF CHEMICAL RESEARCH (2020)
Asymmetric Acceptors with Fluorine and Chlorine Substitution for Organic Solar Cells toward 16.83% Efficiency
Tao Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
Yong Cui et al.
ADVANCED MATERIALS (2020)
D-A Copolymer Donor Based on Bithienyl Benzodithiophene D-Unit and Monoalkoxy Bifluoroquinoxaline A-Unit for High-Performance Polymer Solar Cells
Chenkai Sun et al.
CHEMISTRY OF MATERIALS (2020)
18% Efficiency organic solar cells
Qishi Liu et al.
SCIENCE BULLETIN (2020)
Adding a Third Component with Reduced Miscibility and Higher LUMO Level Enables Efficient Ternary Organic Solar Cells
Ruijie Ma et al.
ACS ENERGY LETTERS (2020)
Optimization Requirements of Efficient Polythiophene:Nonfullerene Organic Solar Cells
Ziqi Liang et al.
JOULE (2020)
Fine-Tuning Energy Levels via Asymmetric End Groups Enables Polymer Solar Cells with Efficiencies over 17%
Zhenghui Luo et al.
JOULE (2020)
Concurrent improvement inJSCandVOCin high-efficiency ternary organic solar cells enabled by a red-absorbing small-molecule acceptor with a high LUMO level
Tao Liu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
High-Performance and Stable Nonfullerene Acceptor-Based Organic Solar Cells for Indoor to Outdoor Light
Sungmin Park et al.
ACS ENERGY LETTERS (2020)
Improved organic solar cell efficiency based on the regulation of an alkyl chain on chlorinated non-fullerene acceptors
Han Yu et al.
MATERIALS CHEMISTRY FRONTIERS (2020)
High-efficiency organic solar cells enabled by halogenation of polymers based on 2D conjugated benzobis(thiazole)
Shuguang Wen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Fluorinated pyrazine-based D-A conjugated polymers for efficient non-fullerene polymer solar cells
Kai Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Mechanically Robust All-Polymer Solar Cells from Narrow Band Gap Acceptors with Hetero-Bridging Atoms
Qunping Fan et al.
JOULE (2020)
Unconjugated Side-Chain Engineering Enables Small Molecular Acceptors for Highly Efficient Non-Fullerene Organic Solar Cells: Insights into the Fine-Tuning of Acceptor Properties and Micromorphology
Tao Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Simple non-fused electron acceptors for efficient and stable organic solar cells
Zhi-Peng Yu et al.
NATURE COMMUNICATIONS (2019)
Achieving Both Enhanced Voltage and Current through Fine-Tuning Molecular Backbone and Morphology Control in Organic Solar Cells
Huan-Huan Gao et al.
ADVANCED ENERGY MATERIALS (2019)
Introducing Fluorine and Sulfur Atoms into Quinoxaline-Based p-type Polymers To Gradually Improve the Performance of Fullerene-Free Organic Solar Cells
Jing Yang et al.
ACS MACRO LETTERS (2019)
Highly Efficient Indoor Organic Solar Cells by Voltage Loss Minimization through Fine-Tuning of Polymer Structures
Ranbir Singh et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
16.67% Rigid and 14.06% Flexible Organic Solar Cells Enabled by Ternary Heterojunction Strategy
Tingting Yan et al.
ADVANCED MATERIALS (2019)
Fluorobenzotriazole (FTAZ)-Based Polymer Donor Enables Organic Solar Cells Exceeding 12% Efficiency
Zhihui Liao et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Carbon-Oxygen-Bridged Ladder-Type Building Blocks for Highly Efficient Nonfullerene Acceptors
Zuo Xiao et al.
ADVANCED MATERIALS (2019)
Fused Benzothiadiazole: A Building Block for n-Type Organic Acceptor to Achieve High-Performance Organic Solar Cells
Jun Yuan et al.
ADVANCED MATERIALS (2019)
Semitransparent solar cells with over 12% efficiency based on a new low bandgap fluorinated small molecule acceptor
Mei Luo et al.
MATERIALS CHEMISTRY FRONTIERS (2019)
Improving the photovoltaic performance of fluorinated 2,2′-bithiophene core-based D(A-Ar)2 type small molecules via strategically end-capped heteroaromatic substitution
Min Li et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Nonhalogen solvent-processed polymer solar cells based on chlorine and trialkylsilyl substituted conjugated polymers achieve 12.8% efficiency
Wenyan Su et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Significant influence of halogenation on the energy levels and molecular configurations of polymers in DTBDT-based polymer solar cells
Jiaming Huang et al.
MATERIALS CHEMISTRY FRONTIERS (2019)
A High-Performance Non-Fullerene Acceptor Compatible with Polymers with Different Bandgaps for Efficient Organic Solar Cells
Tao Liu et al.
SOLAR RRL (2019)
Quinoxaline-Based Wide Band Gap Polymers for Efficient Nonfullerene Organic Solar Cells with Large Open-Circuit Voltages
Jie Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Enhancing the Performance of Polymer Solar Cells via Core Engineering of NIR-Absorbing Electron Acceptors
Shuixing Dai et al.
ADVANCED MATERIALS (2018)
Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor
Shaoqing Zhang et al.
ADVANCED MATERIALS (2018)
Fine-Tuning of Molecular Packing and Energy Level through Methyl Substitution Enabling Excellent Small Molecule Acceptors for Nonfullerene Polymer Solar Cells with Efficiency up to 12.54%
Zhenghui Luo et al.
ADVANCED MATERIALS (2018)
A Medium Bandgap D-A Copolymer Based on 4-Alkyl-3,5-difluorophenyl Substituted Quinoxaline Unit for High Performance Solar Cells
Tao Wang et al.
MACROMOLECULES (2018)
Organic solar cells based on non-fullerene acceptors
Jianhui Hou et al.
NATURE MATERIALS (2018)
Next-generation organic photovoltaics based on non-fullerene acceptors
Pei Cheng et al.
NATURE PHOTONICS (2018)
Introducing alkylthio side chains into acceptor units to improve the photovoltaic performance of a quinoxaline based D-A polymer
Yanrui Lin et al.
ORGANIC ELECTRONICS (2018)
Optimizing the conjugated side chains of quinoxaline based polymers for nonfullerene solar cells with 10.5% efficiency
Shutao Xu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Efficient chemical structure and device engineering for achieving difluorinated 2,2 0-bithiophene- based small molecular organic solar cells with 9.0% efficiency
Min Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Performance comparison of fluorinated and chlorinated donor-acceptor copolymers for polymer solar cells
Yubao Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Chlorine substituted 2D-conjugated polymer for high-performance polymer solar cells with 13.1% efficiency via toluene processing
Qunping Fan et al.
NANO ENERGY (2018)
Non-fullerene acceptors for organic solar cells
Cenqi Yan et al.
NATURE REVIEWS MATERIALS (2018)
Use of two structurally similar small molecular acceptors enabling ternary organic solar cells with high efficiencies and fill factors
Tao Liu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Extension of indacenodithiophene backbone conjugation enables efficient asymmetric A-D-A type non-fullerene acceptors
Jiali Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
A Chlorinated π-Conjugated Polymer Donor for Efficient Organic Solar Cells
Hui Chen et al.
JOULE (2018)
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
Wenchao Zhao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
High photovoltaic performance of as-cast devices based on new quinoxaline-based donor-acceptor copolymers
Mingzhi Zhao et al.
POLYMER CHEMISTRY (2017)
Side-chain engineering for efficient non-fullerene polymer solar cells based on a wide-bandgap polymer donor
Qunping Fan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Wide Bandgap Copolymers Based on Quinoxalino[6,5-f]quinoxaline for Highly Efficient Nonfullerene Polymer Solar Cells
Ting Yu et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Hexafluoroquinoxaline Based Polymer for Nonfullerene Solar Cells Reaching 9.4% Efficiency
Shutao Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Molecular Design of Benzodithiophene-Based Organic Photovoltaic Materials
Huifeng Yao et al.
CHEMICAL REVIEWS (2016)
11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor
Haijun Bin et al.
NATURE COMMUNICATIONS (2016)
Enhanced and controllable open-circuit voltage using 2D-conjugated benzodithiophene (BDT) homopolymers by alkylthio substitution
Ji-Hoon Kim et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution
Chaohua Cui et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
A chlorinated phenazine-based donor-acceptor copolymer with enhanced photovoltaic performance
Ying Li et al.
POLYMER CHEMISTRY (2014)
Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells
Zhicai He et al.
ADVANCED MATERIALS (2011)
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Sung Heum Park et al.
NATURE PHOTONICS (2009)
Share Paper
