Exergy analysis of alternative configurations of a system coproducing synthetic fuels and electricity via biomass gasification, Fischer-Tropsch synthesis and a combined-cycle scheme

Lignocellulosic biomass gasification followed by the Fischer-Tropsch (Fe) synthesis is becoming a promising pathway to produce synthetic biofuels, having the potential of being coupled with combined-cycle strategies in order to coproduce electricity. In this work, the thermodynamic performance of this type of bioenergy system is evaluated through exergy analysis. A base-case process combining biomass gasification, FT synthesis and a combined cycle is defined. Furthermore, two alternative configurations modifying the base-case process are considered: (i) autothermal reforming (ATR) of a fraction of the FT tail gas to increase the fuel yield, and (ii) combustion of a fraction of the conditioned biosyngas to increase electricity production. The biomass conversion plants are simulated using Aspen Plus (R) to obtain the data required for the assessment. The indirect gasifier and the gas combustor are identified as the main sources of irreversibility within the three process configurations, with exergy destruction ratios of 21% and 5-7%, respectively. The gasification subsystem is found to contribute over 50% to the overall exergy destruction, showing 68% efficiency. The power generation subsystem also shows a high contribution to the overall exergy destruction (19-28%) due to high fuel consumption and the significant thermodynamic irreversibility of the cycle. Depending on the plant configuration, overall exergetic efficiencies of 24-27% are attained. The ATR case leads to a higher yield of biofuels, at the expense of lower electricity production. This configuration enhances the exergetic efficiency of the system and thus its thermodynamic performance, in contrast to the alternative configuration for increased power generation. (C) 2017 Elsevier Ltd. All rights reserved.