Related references
Note: Only part of the references are listed.Flexible thermoelectric generators for body heat harvesting - Enhanced device performance using high thermal conductivity elastomer encapsulation on liquid metal interconnects
Yasaman Sargolzaeiaval et al.
APPLIED ENERGY (2020)
Soft and Stretchable Thermoelectric Generators Enabled by Liquid Metal Elastomer Composites
Mason Zadan et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Safety of silicone oils as intraocular medical device: An in vitro cytotoxicity study
Mario R. Romano et al.
EXPERIMENTAL EYE RESEARCH (2020)
Cu-EGaIn enabled stretchable e-skin for interactive electronics and CT assistant localization
Rui Guo et al.
MATERIALS HORIZONS (2020)
Semi-Liquid-Metal-(Ni-EGaIn)-Based Ultraconformable Electronic Tattoo
Rui Guo et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
UV-curable, 3D printable and biocompatible silicone elastomers
Hongping Xiang et al.
PROGRESS IN ORGANIC COATINGS (2019)
A Wearable All-Fabric Thermoelectric Generator
Linden K. Allison et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
High Thermal Conductivity Silicone Elastomer Doped with Graphene Nanoplatelets and Eutectic GaIn Liquid Metal Alloy
Yasaman Sargolzaeiaval et al.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2019)
Antifungal properties and biocompatibility of silver nanoparticle coatings on silicone maxillofacial prostheses in vitro
Zhala Meran et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Cytotoxicity of Gallium-Indium Liquid Metal in an Aqueous Environment
Ji-Hye Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Flexible thermoelectric power generator with Y-type structure using electrochemical deposition process
Nguyen Huu Trung et al.
APPLIED ENERGY (2018)
Wearable thermoelectric generator to harvest body heat for powering a miniaturized accelerometer
Yancheng Wang et al.
APPLIED ENERGY (2018)
Structural design of a flexible thermoelectric power generator for wearable applications
Choong Sun Kim et al.
APPLIED ENERGY (2018)
Advances in liquid metals for biomedical applications
Junjie Yan et al.
CHEMICAL SOCIETY REVIEWS (2018)
Solution-printable fullerene/TiS2 organic/inorganic hybrids for high-performance flexible n-type thermoelectrics
Liming Wang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Thermal Harvesting Potential of the Human Body
Moritz Thielen et al.
JOURNAL OF ELECTRONIC MATERIALS (2018)
Large-area and adaptable electrospun silicon-based thermoelectric nanomaterials with high energy conversion efficiencies
Alex Morata et al.
NATURE COMMUNICATIONS (2018)
High thermal conductivity in soft elastomers with elongated liquid metal inclusions
Michael D. Bartlett et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)
Recent developments and applications of protective silicone coatings: A review of PDMS functional materials
Ubong Eduok et al.
PROGRESS IN ORGANIC COATINGS (2017)
A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges
Abu Raihan Mohammad Siddique et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Recent progress of organic and hybrid thermoelectric materials
Naoki Toshima
SYNTHETIC METALS (2017)
From materials to device design of a thermoelectric fabric for wearable energy harvesters
Mitsuhiro Ito et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Recent advances in organic polymer thermoelectric composites
Guangming Chen et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Liquid-infused nitric oxide-releasing (LINORel) silicone for decreased fouling, thrombosis, and infection of medical devices
Marcus J. Goudie et al.
SCIENTIFIC REPORTS (2017)
Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy
Haiyan Liu et al.
WEARABLE SENSORS AND ROBOTS (2017)
Flexible thermoelectric power generation system based on rigid inorganic bulk materials
Yoomin Eom et al.
APPLIED ENERGY (2017)
Flexible thermoelectric generator using bulk legs and liquid metal interconnects for wearable electronics
Francisco Suarez et al.
APPLIED ENERGY (2017)
Stretchable and Soft Electronics using Liquid Metals
Michael D. Dickey
ADVANCED MATERIALS (2017)
Stretchable Thermoelectric Generators Metallized with Liquid Alloy
Seung Hee Jeong et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Toward 3D Printing of Medical Implants: Reduced Lateral Droplet Spreading of Silicone Rubber under Intense IR Curing
Jan Stieghorst et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
High-Performance Flexible Thermoelectric Power Generator Using Laser Multiscanning Lift-Off Process
Sun Jin Kim et al.
ACS NANO (2016)
Woven-Yarn Thermoelectric Textiles
Jae Ah Lee et al.
ADVANCED MATERIALS (2016)
Thermal energy harvesting from the human body using flexible thermoelectric generator (FTEG) fabricated by a dispenser printing technique
Abu Raihan Mohammad Siddique et al.
ENERGY (2016)
Chemically exfoliated transition metal dichalcogenide nanosheet-based wearable thermoelectric generators
Jin Young Oh et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Designing thermoelectric generators for self-powered wearable electronics
Francisco Suarez et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Experimental validation of the Knudsen effect in nanocellular polymeric foams
B. Notario et al.
POLYMER (2015)
Transformable liquid-metal nanomedicine
Yue Lu et al.
NATURE COMMUNICATIONS (2015)
Mechanical Properties and Brittle Behavior of Silica Aerogels
Thierry Woignier et al.
GELS (2015)
Emerging Applications of Liquid Metals Featuring Surface Oxides
Michael D. Dickey
ACS APPLIED MATERIALS & INTERFACES (2014)
A wearable thermoelectric generator fabricated on a glass fabric
Sun Jin Kim et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Electrical, thermal, and species transport properties of liquid eutectic Ga-In and Ga-In-Sn from first principles
Seungho Yu et al.
JOURNAL OF CHEMICAL PHYSICS (2014)
3D Printing of Free Standing Liquid Metal Microstructures
Collin Ladd et al.
ADVANCED MATERIALS (2013)
Flexible and Semi-Transparent Thermoelectric Energy Harvesters from Low Cost Bulk Silicon (100)
Galo Andres Torres Sevilla et al.
SMALL (2013)
Flexible thermoelectric generator for human body heat energy harvesting
S. E. Jo et al.
ELECTRONICS LETTERS (2012)
Thermal conductivities study on silica aerogel and its composite insulation materials
Gaosheng Wei et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)
Bi2Te3-Based Flexible Micro Thermoelectric Generator With Optimized Design
Wulf Glatz et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2009)
Thickness-dependent mechanical properties of polydimethylsiloxane membranes
Miao Liu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Towards a nanostructured thermoelectric generator using ion-track lithography
E. Koukharenko et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Optimization and fabrication of thick flexible polymer based micro thermoelectric generator
Wulf Glatz et al.
SENSORS AND ACTUATORS A-PHYSICAL (2006)
Coin-size coiled-up polymer foil thermoelectric power generator for wearable electronics
J. Weber et al.
SENSORS AND ACTUATORS A-PHYSICAL (2006)
Fabrication of flexible thermopile generator
K Itoigawa et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)