4.6 Article

CO2 hydrogenation to methanol and hydrocarbons over bifunctional Zn-doped ZrO2/zeolite catalysts

Journal

CATALYSIS SCIENCE & TECHNOLOGY
Volume 11, Issue 4, Pages 1249-1268

Publisher

ROYAL SOC CHEMISTRY
DOI: 10.1039/d0cy01550d

Keywords

-

Funding

  1. European Union's Horizon 2020 Research and Innovation Programme [837733]
  2. French National Research Agency (ANR) as part of the Investissements d'Avenir program [ANR-10-EQPX-45]

Ask authors/readers for more resources

The combination of Zn-doped ZrO2 catalysts with zeolite/zeotype catalysts resulted in efficient CO2 hydrogenation to methanol and its conversion to hydrocarbons. The ZrZnOX sample with 30% Zn showed the best performance, especially when combined with ZSM-5, exhibiting high methanol selectivity and stable conversion at lower temperatures. Various characterization techniques confirmed the tetragonal solid solution formation in ZrZnOX and revealed that the catalyst structure and composition were not affected by the reaction, with initial performances fully restored even after regeneration.
The tandem process of carbon dioxide hydrogenation to methanol and its conversion to hydrocarbons over mixed metal/metal oxide-zeotype catalysts is a promising path to CO2 valorization. Herein, we report three Zn-doped ZrO2 catalysts prepared by co-precipitation of Zn- and Zr-containing salts to obtain three different loadings of Zn (5, 15 and 30 wt%). In the context of bifunctional catalysts, we combined ZrZnOX with two of the most performing zeolite/zeotype catalysts for the methanol-to-hydrocarbons (MTH) reaction: H-ZSM-5 and H-SAPO-34. Catalytic testing at 250-350 degrees C and 20-40 bar revealed that H-ZSM-5 is more stable and more capable of converting methanol at low temperature, whereas H-SAPO-34 shows the highest C3 selectivity. The best performance was observed for the ZrZnOX sample with 30% Zn, combined with ZSM-5 at 350 degrees C, 30 bar and H-2/CO2/N-2 = 6/2/1. Under these conditions, the equilibrium methanol yield was observed after 0.4 s g(-1) ml(-1) over ZrZnOX alone. Mixing with ZSM-5 in a 1 : 1 weight ratio, methanol was rapidly converted to hydrocarbons, with an optimum C-3 productivity of 1.5 mol kg-1 h(-1) at 24000 ml h(-1) g(-1). An extensive surficial, textural and structural characterization of ZrZnOX alone was carried out by FT-IR spectroscopy, N-2 adsorption/desorption at liquid nitrogen temperature, PXRD and XAS. Formation of a ZrZnOX tetragonal solid solution was confirmed for all the samples (PXRD, XAS). The amount of Zr4+ sites at the surface was found to decrease, while the number of oxygen vacancies increased after H-2 treatment at 400 degrees C, coherent with an increase of Zn loading (FT-IR). DFT modelling pointed out that once a stoichiometric oxygen vacancy is induced by the presence of Zn, the formation of extra oxygen vacancies during activation is thermodynamically favored. Moreover, i) the oxygen vacancies were found to play an active role in CO2 hydrogenation, in accordance with experimental data, and ii) methanol is most likely formed via the formate pathway, and is energetically favored compared to CO formation, in agreement with the high methanol selectivity observed experimentally at low CO2 conversion. Importantly, operando-XAS, XPS, TEM and PXRD studies of the as-prepared, pretreated and tested catalysts showed that the structure and composition of the catalyst is not affected by the reaction. Indeed, a final catalytic test carried out on the regenerated ZrZnOX/H-ZSM-5 catalyst showed that the initial performances were completely restored and no Zn exchange in the zeolite was observed neither before nor after testing.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available