Related references
Note: Only part of the references are listed.Tool wear and hole quality evaluation in cryogenic Drilling of Inconel 718 superalloy
Navneet Khanna et al.
TRIBOLOGY INTERNATIONAL (2020)
State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review
Xiaoliang Liang et al.
MEASUREMENT (2019)
Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures
Sean Gribbin et al.
MATERIALS CHARACTERIZATION (2019)
Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQL
Armando Marques et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
3D modeling of recrystallized layer depth and residual stress in dry machining of nickel-based alloy
Farshid Jafarian
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Effects of high-pressure cooling in the flank and rake faces of WC tool on the tool wear mechanism and process conditions in turning of alloy 718
Nageswaran Tamil Alagan et al.
WEAR (2019)
Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool (10.1007/s00170-019-04221-z, 2019)
Chetan Darshan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
Shang Sui et al.
ACTA MATERIALIA (2019)
Tribological and machining characteristics of a minimum quantity lubrication (MQL) technology using GO/SiO2 hybrid nanoparticle water-based lubricants as cutting fluids
Tao Lv et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Experimental results on the performance of cryogenic treatment of tool and minimum quantity lubrication for machinability improvement in the turning of Inconel 718
Yogesh V. Deshpande et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)
Modeling of machined surface characteristics in cryogenic orthogonal turning of inconel 718
Matija Hribersek et al.
MACHINING SCIENCE AND TECHNOLOGY (2018)
Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach
Amin Bagherzadeh et al.
TRIBOLOGY INTERNATIONAL (2018)
Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement
W. Grzesik et al.
TRIBOLOGY INTERNATIONAL (2018)
Microstructural characteristics of Alloy 718 and Waspaloy and their influence on flank wear during turning
Philipp Hoier et al.
WEAR (2018)
The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills
Necati Ucak et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
A review on the progress towards improvement in surface integrity of Inconel 718 under high pressure and flood cooling conditions
Aziz Ui Hassan Mohsan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Analysis of residual stress and cutting force in end milling of Inconel 718 using conventional flood cooling and minimum quantity lubrication
Gleiton de Paula Oliveira et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Sustainability in machining: Eco-friendly turning of Inconel 718. Surface characterisation and economic analysis
Vincenzo Tebaldo et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Turning of Inconel 718 using inserts with cooling channels under high pressure jet coolant assistance
Zhenglong Fang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Nano-scale characterization of white layer in broached Inconel 718
Zhe Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Cooling performance of micro-texture at the tool flank face under high pressure jet coolant assistance
Zhenglong Fang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Wear behavior of solid SiAlON milling tools during high speed milling of Inconel 718
Ali Celik et al.
WEAR (2017)
Tool wear and surface integrity of inconel 718 in dry and cryogenic coolant at high cutting speed
A. H. Musfirah et al.
WEAR (2017)
Flank wear characteristics of WC-Co tools when turning Alloy 718 with high-pressure coolant supply
Philipp Hoier et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
A comparative study of recent lubri-coolant strategies for turning of Ni-based superalloy
Bikash Chandra Behera et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Tool wear on nickel alloys with different coolant pressures: Comparison of Alloy 718 and Waspaloy
R. Polvorosa et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy
Farbod Akhavan Niaki et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Hybrid cooling and lubricating technology for CNC milling of Inconel 718 nickel alloy
Alborz Shokrani et al.
27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)
Optimization of Cutting Parameters for Surface Roughness under MQL, using Al2O3 Nanolubricant, during Turning of Inconel 718
M. A. M. Ali et al.
INTERNATIONAL RESEARCH AND INNOVATION SUMMIT (IRIS2017) (2017)
Internal cryolubrication approach for Inconel 718 milling
O. Pereira et al.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017) (2017)
High speed machining of Inconel 718: tool wear and surface roughness analysis
D. M. D'Addona et al.
10TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '16 (2017)
The Procedure of Solving the Inverse Problem for Determining Surface Heat Transfer Coefficient between Liquefied Nitrogen and Inconel 718 Workpiece in Cryogenic Machining
M. Hribersek et al.
16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO) (2017)
Study of oil-water ratio and flow rate of MQL fluid in high speed milling of Inconel 718
Yunn-Shiuan Liao et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2017)
Modelling of specific energy requirements in machining as a function of tool and lubricoolant usage
Paolo C. Priarone et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Cryogenic manufacturing processes
I. S. Jawahir et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
High speed turning of Inconel 718 using PVD-coated PCBN tools
Sein Leung Soo et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
State-of-the-art in surface integrity in machining of nickel-based super alloys
A. Thakur et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Experimental studies and CFD simulation of the internal cooling conditions when drilling Inconel 718
Ekrem Oezkaya et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Dry machining of nickel-based super alloy as a sustainable alternative using TiN/TiAlN coated tool
A. Thakur et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Surface Integrity Analysis of Inconel 718 after Turning with Different Solid Lubricants Dispersed in Neat Oil Delivered by MQL
Armando Marques et al.
44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44 (2016)
An analysis of cutting parameters, coated materials and nose radii on residual stresses when turning Inconel 718
Zhiyang Huang et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Influence of tool wear on residual stresses when turning Inconel 718
A. Madariaga et al.
3RD CIRP CONFERENCE ON SURFACE INTEGRITY (2016)
New observations on tool wear mechanism in machining Inconel 718 under water vapor plus air cooling lubrication cutting conditions
YiHang Fan et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Sustainable machining of high temperature Nickel alloy - Inconel 718: part 2-chip breakability and optimization
Franci Pusavec et al.
JOURNAL OF CLEANER PRODUCTION (2015)
The effect of tool nose radius on surface integrity and residual stresses when turning Inconel 718™
A. R. C. Sharman et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Study on surface defects in milling Inconel 718 super alloy
Liu Chang et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling
Rachid M'Saoubi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining
Yusuf Kaynak
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Analysis of residual stress and work-hardened profiles on Inconel 718 when face turning with large-nose radius tools
A. Madariaga et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Sustainable machining of high temperature Nickel alloy - Inconel 718: part 1 - predictive performance models
Franci Pusavec et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Simultaneous Optimizing Residual Stress and Surface Roughness in Turning of Inconel718 Superalloy
Farshid Jafarian et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Analysis of subsurface microstructure and residual stresses in machined Inconel 718 with PCBN and Al2O3-SiCw tools
Jinming Zhou et al.
2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI) (2014)
Analysis of thermal effect on residual stresses of broached Inconel 718
Z. Chen et al.
RESIDUAL STRESSES IX (2014)
Study of surface quality in machining nickel-based alloy Inconel 718
YiHang Fan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Investigation of surface integrity in dry machining of Inconel 718
Domenico Umbrello
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
State-of-the-art cryogenic machining and processing
A. Shokrani et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2013)
Tool wear characteristics in machining of nickel-based superalloys
Dahu Zhu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Tribological behaviour of Ti6Al4V and Inconel718 under dry and cryogenic conditions-Application to the context of machining with carbide tools
C. Courbon et al.
TRIBOLOGY INTERNATIONAL (2013)
An experimental investigation of the effect of coating material on tool wear in micro milling of Inconel 718 super alloy
Irfan Ucun et al.
WEAR (2013)
Analysis of tool wear patterns in finishing turning of Inconel 718
J. L. Cantero et al.
WEAR (2013)
Surface integrity analysis of machined Inconel 718 over multiple length scales
Rachid M'Saoubi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
Jinming Zhou et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
A. Shokrani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
S. Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2012)
An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools
J. M. Zhou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Analysis of acoustic emission signals and surface integrity in the high-speed turning of Inconel 718
R. S. Pawade et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Investigation on Machining Performance of Inconel 718 under High Pressure Cooling Conditions
Oguz Colak
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2012)
Tool wear/life evaluation when finish turning Inconel 718 using PCBN tooling
S. A. Khan et al.
FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012 (2012)
Effect of Cutting Conditions on Machinability of Superalloy Inconel 718 During High Speed Turning with Coated and Uncoated PCBN Tools
V. Bushlya et al.
45TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS 2012 (2012)
An Initial Study of the Effect of Using Liquid Nitrogen Coolant on the Surface Roughness of Inconel 718 Nickel-Based Alloy in CNC Milling
A. Shokrani et al.
45TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS 2012 (2012)
Effect of high-pressure cooling on life of SiAlON tools in machining of Inconel 718
Zydrunas Vagnorius et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Machining induced surface integrity in titanium and nickel alloys: A review
Durul Ulutan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Analysis of Residual Stresses in Sustainable Cryogenic Machining of Nickel Based Alloy-Inconel 718
Jani Kenda et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Surface integrity in cryogenic machining of nickel based alloy-Inconel 718
F. Pusavec et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Dry machining of Inconel 718, workpiece surface integrity
A. Devillez et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
AN ANALYSIS OF SURFACE INTEGRITY WHEN DRILLING INCONEL 718 USING PALM OIL AND SYNTHETIC ESTER UNDER MQL CONDITION
Erween A. Rahim et al.
MACHINING SCIENCE AND TECHNOLOGY (2011)
A study on droplets and their distribution for minimum quantity lubrication (MQL)
Kyung-Hee Park et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Transitioning to sustainable production - Part I: application on machining technologies
Frand Pusavec et al.
JOURNAL OF CLEANER PRODUCTION (2010)
Machining evaluation of a hybrid MQL-CO2 grinding technology
J. A. Sanchez et al.
JOURNAL OF CLEANER PRODUCTION (2010)
Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718
Abhay Bhatt et al.
TRIBOLOGY INTERNATIONAL (2010)
Machinability investigation of Inconel 718 in high-speed turning
D. G. Thakur et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Cooling techniques for improved productivity in turning
Vishal S. Sharma et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
A time-frequency acoustic emission-based monitoring technique to identify workpiece surface malfunctions in milling with multiple teeth cutting simultaneously
Iulian Marinescu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Investigation of machining performance in high-pressure jet assisted turning of Inconel 718: An experimental study
C. Courbon et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Surface integrity of dry machined titanium alloys
A. Ginting et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Study on the machinability characteristics of superalloy Inconel 718 during high speed turning
D. G. Thakur et al.
MATERIALS & DESIGN (2009)
Effect of Machining Parameters and Cutting Edge Geometry on Surface Integrity when Drilling and Hole Making in Inconel 718
Ali Akhavan Farid et al.
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2009)
Analysis of residual stresses induced by dry turning of difficult-to-machine materials
J. C. Outeiro et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
A critical analysis of effectiveness of acoustic emission signals to detect tool and workpiece malfunctions in milling operations
Iulian Marinescu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Micro-liter lubrication machining of Inconel 718
Toshiyuki Obikawa et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems
A. R. C. Sharman et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
An investigation of cutting forces and surface damage in high-speed turning of Inconel 718
R. S. Pawade et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
High speed MQL finish-turning of Inconel 718 with different coated tools
Y. Kamata et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Tool-life and wear mechanisms of CBN tools in machining of Inconel 718
J. P. Costes et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools
A. Devillez et al.
WEAR (2007)
The effects of cutting speed on tool wear and tool life when machining Inconel 718 with ceramic tools
A. Altin et al.
MATERIALS & DESIGN (2007)
The effect of coating material and geometry of cutting tool and cutting speed on machinability properties of Inconel 718 super alloys
Muammer Nalbant et al.
MATERIALS & DESIGN (2007)
An analysis of the residual stresses generated in Inconel 718™ when turning
ARC Sharman et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Nickel-based superalloys for advanced turbine engines: Chemistry, microstructure, and properties
TM Pollock et al.
JOURNAL OF PROPULSION AND POWER (2006)
The effect of machining on surface integrity of titanium alloy Ti-6% Al-4% V
CH Che-Haron et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Machining of nickel-base, Inconel 718, alloy with ceramic tools under finishing conditions with various coolant supply pressures
EO Ezugwu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718™ at high cutting speeds
RT Coelho et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Residual stress and surface roughness when facing age hardened Inconel 718 with-CBN and ceramic cutting tools
RM Arunachalam et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Effect of high-pressure coolant supply when machining nickel-base, Inconel 718, alloy with coated carbide tools
EO Ezugwu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Three-dimensional finite element modelling of high-speed milling of Inconel 718
SL Soo et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2004)
Workpiece surface integrity and tool life issues when turning Inconel 718™ nickel based superalloy
ARC Sharman et al.
MACHINING SCIENCE AND TECHNOLOGY (2004)
Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools
RM Arunachalam et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Hybrid machining of Inconel 718
ZY Wang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
An overview of the machinability of aeroengine alloys
EO Ezugwu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
High speed cutting of Inconel 718 with coated carbide and ceramic inserts
L Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Overview -: Residual stress part 1 -: Measurement techniques
PJ Withers et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)
Structural characterization of the aged Inconel 718
C Slama et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2000)