Related references
Note: Only part of the references are listed.Integration of Forming Operations on Hybrid Additive Manufacturing Systems Based on Fusion Welding
Joao P. M. Pragana et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2020)
Al-Cu alloy fabricated by novel laser-tungsten inert gas hybrid additive manufacturing
Dongjiang Wu et al.
ADDITIVE MANUFACTURING (2020)
Effect of hot rolling on structure and mechanical properties of Ti-6Al-4V alloy parts produced by direct laser deposition
P. Sokolov et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Influence of processing parameters on the density of 316L stainless steel parts manufactured through laser powder bed fusion
Joao P. M. Pragana et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2020)
Joining aluminium profiles to composite sheets by additive manufacturing and forming
R. J. S. Baptista et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Hot forging wire and arc additive manufacturing (HF-WAAM)
Valdemar R. Duarte et al.
ADDITIVE MANUFACTURING (2020)
Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing
M. Bambach et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Evaluation of a polymer-steel laminated sheet composite structure produced by friction stir additive manufacturing (FSAM) technology
H. Aghajani Derazkola et al.
POLYMER TESTING (2020)
Optimization of the geometry for the end lateral extension path strategy to fabricate intersections using laser and cold metal transfer hybrid additive manufacturing
Runsheng Li et al.
ADDITIVE MANUFACTURING (2020)
Lightweight in Automotive Components by Forming Technology
Stephan Rosenthal et al.
AUTOMOTIVE INNOVATION (2020)
Additive Manufacturing of Tailored Blank for Sheet-Bulk Metal Forming Processes
R. Schulte et al.
INTERNATIONAL DEEP-DRAWING RESEARCH GROUP (IDDRG 2020) (2020)
Joining by forming of additive manufactured 'mortise-and-tenon' joints
Diogo F. M. Silva et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2019)
Forming properties of additively manufactured monolithic Hastelloy X sheets
Stephan Rosenthal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
110th Anniversary: Vat Photopolymerization-Based Additive Manufacturing: Current Trends and Future Directions in Materials Design
Gayan A. Appuhamillage et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
On the rapid manufacturing process of functional 3D printed sand molds
Saptarshee Mitra et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Binder jetting: A review of process, materials, and methods
Mohsen Ziaee et al.
ADDITIVE MANUFACTURING (2019)
Additive-incremental forming hybrid manufacturing technique to improve customised part performance
Giuseppina Ambrogio et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Wire plus Arc Additively Manufactured Inconel 718: Effect of post-deposition heat treatments on microstructure and tensile properties
Cui E. Seow et al.
MATERIALS & DESIGN (2019)
Simulation approach for three-point plastic bending of additively manufactured Hastelloy X sheets
Stephan Rosenthal et al.
47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)
A new joining by forming process to produce lap joints in metal sheets
Joao P. M. Pragana et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Joining tubes to sheets by boss forming and upsetting
L. M. Alves et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Wire-based additive manufacturing using an electron beam as heat source
J. Fuchs et al.
WELDING IN THE WORLD (2018)
Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Joamin Gonzalez-Gutierrez et al.
MATERIALS (2018)
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
Bintao Wu et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
3D nanofabrication by volumetric deposition and controlled shrinkage of patterned scaffolds
Daniel Oran et al.
SCIENCE (2018)
Experimental Determination of Residual Stresses Generated by Single Point Incremental Forming of AlSi10Mg Sheets Produced Using SLM Additive Manufacturing Process
Cecilio Lopez et al.
MATERIALS (2018)
On the effect of shot-peening on fatigue resistance of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting (AM-SLM)
Naor Elad Uzan et al.
ADDITIVE MANUFACTURING (2018)
Hot deformation behavior of Ti-6Al-4V alloy: Effect of initial microstructure
Z. X. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Formability of a wire arc deposited aluminium alloy
C. M. A. Silva et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
Material jetting additive manufacturing: An experimental study using designed metrological benchmarks
Yee Ling Yap et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components
Paul A. Colegrove et al.
SCRIPTA MATERIALIA (2017)
Case Studies on Local Reinforcement of Sheet Metal Components by Laser Additive Manufacturing
Markus Bambach et al.
METALS (2017)
An Overview of Additive Manufacturing of Titanium Components by Directed Energy Deposition: Microstructure and Mechanical Properties
Abdollah Saboori et al.
APPLIED SCIENCES-BASEL (2017)
Innovative advances in additive manufactured moulds for short plastic injection series
M. A. Leon-Cabezas et al.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017) (2017)
New process chains involving additive manufacturing and metal forming - a chance for saving energy?
Margarita D. Bambach et al.
INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017 (2017)
Additive manufacturing of metallic components by selective electron beam melting - a review
C. Koerner
INTERNATIONAL MATERIALS REVIEWS (2016)
Wire plus Arc Additive Manufacturing
S. W. Williams et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Hybrid additive manufacturing technologies - An analysis regarding potentials and applications
Marion Merklein et al.
LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)
AIMS- a Metal Additive-Hybrid Manufacturing System: System Architecture and Attributes
Guha Manogharan et al.
43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43 (2015)
Qualification of laser based additive production for manufacturing of forging Tools
Daniel Junker et al.
4TH INTERNATIONAL CONFERENCE ON NEW FORMING TECHNOLOGY (ICNFT 2015) (2015)
Preparation of PDMS microfluidic devices based on drop-on-demand generation of wax molds
Zong'an Li et al.
ANALYTICAL METHODS (2014)
Hybrid processes in manufacturing
Bert Lauwers et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
Hybrid Manufacturing in Micro/Nano Scale: A Review
Won-Shik Chu et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2014)
A review of hybrid manufacturing processes - state of the art and future perspectives
Z. Zhu et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2013)
Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling
Paul A. Colegrove et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti-6Al-4V
F. Martina et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Thermo-mechanical processing of aluminum profiles by integrated electromagnetic compression subsequent to hot extrusion
A. Jaeger et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Ramp-up of hybrid manufacturing technologies
B. Nau et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2011)
New possibility for the connection of metal sheets and fibre reinforced plastics
Stephan A. Ucsnik et al.
LIGHT METALS TECHNOLOGY V (2011)
Applications of Laser Assisted Metal Rapid Tooling Process to Manufacture of Molding & Forming Tools - State of the Art
Dong-Gyu Ahn
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: Microstructure and mechanical properties
Bernd Baufeld et al.
MATERIALS & DESIGN (2010)
A layer thickness algorithm for additive/subtractive rapid pattern manufacturing
Xiaoming Luo et al.
RAPID PROTOTYPING JOURNAL (2010)
Hybrid plasma deposition and milling for an aeroengine double helix integral impeller made of superalloy
Xinhong Xiong et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2010)
Investigation into a new hybrid forming process: Incremental sheet forming combined with stretch forming
B. Taleb Araghi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Residual stress engineering in friction stir welds by roller tensioning
J. Altenkirch et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Study of rapid and direct thick coating deposition by hybrid plasma-laser manufacturing
Hai-ou Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2006)
The characteristics of arc beam shaping in hybrid plasma and laser deposition manufacturing
Zhang Hai'ou et al.
SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES (2006)
3D welding and milling: Part I - a direct approach for freeform fabrication of metallic prototypes
YA Song et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Statistical process design for hybrid adaptive layer manufacturing
A Sreenathbabu et al.
RAPID PROTOTYPING JOURNAL (2005)
Effect and control of hatch length on material properties in the direct metal laser sintering process
Y Ning et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2005)
Fundamental study on plasma deposition manufacturing
H Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Hybrid high speed machining (HSM): System design and experimental results for grinding/HSM and EDM/HSM
DK Aspinwall et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)
Share Paper
