Related references
Note: Only part of the references are listed.On the importance of droplet shrinkage in CFD-modeling of spray drying
Hasan Jubaer et al.
DRYING TECHNOLOGY (2018)
A comprehensive review of thin-layer drying models used in agricultural products
Can Ertekin et al.
CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2017)
CFD modeling of a pilot-scale countercurrent spray drying tower for the manufacture of detergent powder
Muzammil Ali et al.
DRYING TECHNOLOGY (2017)
Effect of temperature and velocity of superheated steam on initial condensation of distillers' spent grain pellets during drying
Rani Puthukulangara Ramachandran et al.
DRYING TECHNOLOGY (2017)
Thermo-Physical Properties of Distillers' Spent Grain Pellets at Different Moisture Contents and Condensed Distillers' Soluble Concentrations
Puthukulangara Ramachandran et al.
FOOD AND BIOPROCESS TECHNOLOGY (2017)
Three-dimensional CFD modelling of superheated steam drying of a single distillers' spent grain pellet
Rani Puthukulangara Ramachandran et al.
JOURNAL OF FOOD ENGINEERING (2017)
Modeling of drying kinetics of green peas by reaction engineering approach
Xinyuan Gao et al.
DRYING TECHNOLOGY (2016)
CFD based extraction column design - Chances and challenges
Mark W. Hlawitschka et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2016)
CFD study of turbulent jet impingement on curved surface
Javad Taghinia et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2016)
Modeling the Thin-Layer Drying of Fruits and Vegetables: A Review
Daniel I. Onwude et al.
COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY (2016)
A New Physics-Based Drying Model of Thin Clothes in Air-Vented Clothes Dryers
Taeil Yi et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2016)
Heat transfer and entropy generation in air jet impingement on a model rough surface
Peng Xu et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)
Modelling and simulation of wood chip combustion in a hot air generator system
J. K. A. T. Rajika et al.
SPRINGERPLUS (2016)
Application of multiphysics and multiscale simulations to optimize industrial wood drying kilns
V. Zadin et al.
APPLIED MATHEMATICS AND COMPUTATION (2015)
An assessment on modeling drying processes: Equilibrium multiphase model and the spatial reaction engineering approach (S-REA)
Aditya Putranto et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)
Unsteady RANS and detached eddy simulation of the multiphase flow in a co-current spray drying
Jolius Gimbun et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2015)
CFD Model of Particle Agglomeration in Spray Drying
M. Jaskulski et al.
DRYING TECHNOLOGY (2015)
CFD Modeling of Air Flow on Wall Deposition in Different Spray Dryer Geometries
Samaneh Keshani et al.
DRYING TECHNOLOGY (2015)
Drying Characteristics and Moisture Diffusivity of Distillers' Spent Grains Dried in Superheated Steam
Justin Bourassa et al.
DRYING TECHNOLOGY (2015)
A multiphase porous medium transport model with distributed sublimation front to simulate vacuum freeze drying
Alexander D. Warning et al.
FOOD AND BIOPRODUCTS PROCESSING (2015)
Validation of a CFD Melting and Solidification Model for Phase Change in Vertical Cylinders
M. D. Muhammad et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2015)
Multi-Scale Multiphase Modeling of Transport Phenomena in Spray-Drying Processes
Maksim Mezhericher et al.
DRYING TECHNOLOGY (2015)
Numerical Investigation on Effect of Food Particle Mass on Spout Elevation of a Gas-Particle Spout Fluidized Bed in a Microwave-Vacuum Dryer
Guangyuan Jin et al.
DRYING TECHNOLOGY (2015)
Two-Phase Turbulence Models in Eulerian-Eulerian Simulation of Gas-Particle Flows and Coal Combustion
Lixing Zhou
NEW PARADIGM OF PARTICLE SCIENCE AND TECHNOLOGY, PROCEEDINGS OF THE 7TH WORLD CONGRESS ON PARTICLE TECHNOLOGY (2015)
Advanced computational modelling for drying processes - A review
Thijs Defraeye
APPLIED ENERGY (2014)
CFD Simulation of Deep-Bed Paddy Drying Process and Performance
Mohsen Ranjbaran et al.
DRYING TECHNOLOGY (2014)
Coupling CFD and Diffusion Models for Analyzing the Convective Drying Behavior of a Single Rice Kernel
Ramadan ElGamal et al.
DRYING TECHNOLOGY (2014)
Analysis for heat transfer enhancement of helical and electrical heating tube heat exchangers in vacuum freeze-drying plant
Chin-Chi Cheng et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)
CFD simulation of a pharmaceutical bubbling bed drying process at three different scales
Jungkee Jang et al.
POWDER TECHNOLOGY (2014)
Mathematical Modelling of Cucumber (Cucumis Sativus) Drying
N. Shahari et al.
PROCEEDINGS OF THE 21ST NATIONAL SYMPOSIUM ON MATHEMATICAL SCIENCES (SKSM21): GERMINATION OF MATHEMATICAL SCIENCES EDUCATION AND RESEARCH TOWARDS GLOBAL SUSTAINABILITY (2014)
Large eddy simulation of unsteady turbulent flow in a semi-industrial size spray dryer
F. J. Jongsma et al.
DAIRY SCIENCE & TECHNOLOGY (2013)
Identification of Effective Diffusivities in Anisotropic Material of Pine Wood during Drying with Superheated Steam
Robert Adamski et al.
DRYING TECHNOLOGY (2013)
Eulerian-Lagrangian Simulation and Experimental Validation of Pneumatic Conveying Dryer
Samy M. El-Behery et al.
DRYING TECHNOLOGY (2013)
Simulation of Drying Characteristics of Evaporation from a Wet Particle in a Turbulent Pulsed Opposing Jet Contactor
Ali Yahyaee et al.
DRYING TECHNOLOGY (2013)
Coupled CFD-PBE Simulation of Nucleation in Fluidized Bed Spray Granulation
Z. Li et al.
DRYING TECHNOLOGY (2013)
Freeze-drying simulation framework coupling product attributes and equipment capability: Toward accelerating process by equipment modifications
Arnab Ganguly et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2013)
Empirical and diffusion models to describe water transport into chickpea (Cicer arietinum L.)
Wilton P. da Silva et al.
INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY (2013)
Energy and exergy analysis of fluidized bed dryer based on two-fluid modeling
M. R. Assari et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2013)
Energy-efficient thermal drying using impinging-jets with time-varying heat input - A computational study
Jundika C. Kurnia et al.
JOURNAL OF FOOD ENGINEERING (2013)
CFD modelling of condensers for freeze-drying processes
Miriam Petitti et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2013)
Simulation of Hybrid Solar Dryer
Y. M. Yunus et al.
4TH INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT 2013 (ICEE 2013) (2013)
Convective heat and mass exchange at surfaces of horticultural products: A microscale CFD modelling approach
Thijs Defraeye et al.
AGRICULTURAL AND FOREST METEOROLOGY (2012)
Population balance model for drying of droplets containing aggregating nanoparticles
Andreas Bueck et al.
AICHE JOURNAL (2012)
THEORETICAL AND EXPERIMENTAL DRYING OF A CYLINDRICAL SAMPLE BY APPLYING HOT AIR AND INFRARED RADIATION IN AN INERT MEDIUM FLUIDIZED BED
B. Honarvar et al.
BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2012)
Modeling of Air Flow in an Industrial Countercurrent Spray-Drying Tower
Pawel Wawrzyniak et al.
DRYING TECHNOLOGY (2012)
Numerical Analysis of Drying Characteristics of Wet Material Immersed in Fluidized Bed of Inert Particles
Yuji Tatemoto et al.
DRYING TECHNOLOGY (2012)
CFD Simulation on Drying and Dust Integration in Fluidized Bed Spray Granulation
Z. Li et al.
DRYING TECHNOLOGY (2012)
A Numerical Study on the Convective Heat Transfer Characteristics of Pulsed Impingement Drying
Ying Jiang et al.
DRYING TECHNOLOGY (2012)
CFD Modeling of Microwave-Assisted Fluidized Bed Drying of Moist Particles Using Two-Fluid Model
M. Ranjbaran et al.
DRYING TECHNOLOGY (2012)
A Hybrid Lumped Parameter/Neural Network Model for Spouted Bed Drying of Pastes with Inert Particles
J. T. Freire et al.
DRYING TECHNOLOGY (2012)
Surface heat and mass transfer coefficients for multiphase porous media transport models with rapid evaporation
Amit Halder et al.
FOOD AND BIOPRODUCTS PROCESSING (2012)
Computational transport phenomena in bioprocessing with the approach of the optimized source term in the governing equations
Maria Valeria De Bonis et al.
HEAT AND MASS TRANSFER (2012)
Numerical analysis of convective drying of gypsum boards
Thijs Defraeye et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Numerical investigations of unconstrained melting of nano-enhanced phase change material (NEPCM) inside a spherical container
S. F. Hosseinizadeh et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2012)
Computational modelling of the transport phenomena occurring during convective drying of prunes
Henry T. Sabarez
JOURNAL OF FOOD ENGINEERING (2012)
Nonequilibrium Thermal Dynamic Modeling of Porous Medium Vacuum Drying Process
Zhijun Zhang et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2012)
CFD-DEM study of effect of bed thickness for bubbling fluidized beds
Tingwen Li et al.
PARTICUOLOGY (2012)
Microwave Drying of Food and Agricultural Materials: Basics and Heat and Mass Transfer Modeling
Hao Feng et al.
FOOD ENGINEERING REVIEWS (2012)
Suitability analysis of lumped-capacitance formulations for adsorbed gas storage
D. S. Jurumenha et al.
APPLIED THERMAL ENGINEERING (2011)
Systematic mesh development for 3D CFD simulation of fixed beds: Single sphere study
Anthony G. Dixon et al.
COMPUTERS & CHEMICAL ENGINEERING (2011)
Performance Optimization of a Brick Dryer Using Porous Simulation Approach
H. Shokouhmand et al.
DRYING TECHNOLOGY (2011)
On Prediction of the Drying Rate in Superheated Steam Drying Process
Z. Pakowski et al.
DRYING TECHNOLOGY (2011)
Particle-Gas Mass Transfer in a Spouted Bed with Adjustable Air Inlet
T. Hoffmann et al.
DRYING TECHNOLOGY (2011)
Numerical Simulation on Superheated Steam Fluidized Bed Drying: I. Model Construction
Deyong Yang et al.
DRYING TECHNOLOGY (2011)
Modeling Composting Processes with Local Equilibrium and Local Non-Equilibrium Approaches for Water Exchange Terms
A. Pujol et al.
DRYING TECHNOLOGY (2011)
Investigation of Temperature Distribution and Heat Transfer in Fluidized Bed Using a Combined CFD-DEM Model
Sumol Sae-Heng et al.
DRYING TECHNOLOGY (2011)
Convective heat transfer coefficients for exterior building surfaces: Existing correlations and CFD modelling
Thijs Defraeye et al.
ENERGY CONVERSION AND MANAGEMENT (2011)
Convective drying of an individual iron ore pellet - Analysis with CFD
Anna-Lena Ljung et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)
A Review of Thin Layer Drying of Foods: Theory, Modeling, and Experimental Results
Zafer Erbay et al.
CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2010)
A Study of Particle Histories during Spray Drying Using Computational Fluid Dynamic Simulations
C. Anandharamakrishnan et al.
DRYING TECHNOLOGY (2010)
Theoretical Models of Single Droplet Drying Kinetics: A Review
M. Mezhericher et al.
DRYING TECHNOLOGY (2010)
Empirical Macroscopic Model for Drying of Porous Media Based on Pore Networks and Scaling Theory
N. Vorhauer et al.
DRYING TECHNOLOGY (2010)
A Fundamental Model of Particle Deposition Incorporated in CFD Simulations of an Industrial Milk Spray Dryer
Yan Jin et al.
DRYING TECHNOLOGY (2010)
Application of Computational Fluid Dynamics for Simulation of Drying Processes: A Review
Tarek J. Jamaleddine et al.
DRYING TECHNOLOGY (2010)
Model-Based Monitoring and Control of Industrial Freeze-Drying Processes: Effect of Batch Nonuniformity
Antonello A. Barresi et al.
DRYING TECHNOLOGY (2010)
Multiscale Modeling of Drying as a Powerful Extension of the Macroscopic Approach: Application to Solid Wood and Biomass Processing
Patrick Perre
DRYING TECHNOLOGY (2010)
Predicting Spray Dryer Deposits by CFD and an Empirical Drying Model
T. Ullum et al.
DRYING TECHNOLOGY (2010)
The Scale-Adaptive Simulation Method for Unsteady Turbulent Flow Predictions. Part 2: Application to Complex Flows
Y. Egorov et al.
FLOW TURBULENCE AND COMBUSTION (2010)
Three dimensional numerical modeling of simultaneous heat and moisture transfer in a moist object subjected to convective drying
V. P. Chandra Mohan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)
Improved 3-D temperature uniformity in a laboratory drying oven based on experimentally validated CFD computations
Jacek Smolka et al.
JOURNAL OF FOOD ENGINEERING (2010)
Effect of drying conditions on drying kinetics and quality of aromatic Pandanus amaryllifolius leaves
Kalpana Rayaguru et al.
JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2010)
CFD studies of solids hold-up distribution and circulation patterns in gas-solid fluidized beds
Seyyed Hossein Hosseini et al.
POWDER TECHNOLOGY (2010)
A Model for Flow and Deformation in Unsaturated Swelling Porous Media
Haolin Zhu et al.
TRANSPORT IN POROUS MEDIA (2010)
Computational fluid dynamics (CFD) applications in spray drying of food products
Rinil Kuriakose et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2010)
A Composite Reaction Engineering Approach to Drying of Aqueous Droplets Containing Sucrose, Maltodextrin (DE6) and Their Mixtures
Kamlesh C. Patel et al.
AICHE JOURNAL (2009)
MODELING AND SIMULATING THE DRYING OF GRASS SEEDS (Brachiaria brizantha) IN FLUIDIZED BEDS: EVALUATION OF HEAT TRANSFER COEFFICIENTS
A. C. Rizzi et al.
BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2009)
Scale-adaptive simulation (SAS) modelling of a pilot-scale spray dryer
D. F. Fletcher et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2009)
Improvement of a mathematical model for low-pressure superheated steam drying of a biomaterial
Sommart Kittiworrawatt et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Numerical Study of the Drying Process of Different Sized Particles in an Industrial-Scale Spray Dryer
Yan Jin et al.
DRYING TECHNOLOGY (2009)
Modeling of Thin-Layer Drying on an Inert Sphere
Susan D. St George et al.
DRYING TECHNOLOGY (2009)
Review of the shear-stress transport turbulence model experience from an industrial perspective
Florian R. Menter
INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS (2009)
A comprehensive probability density function formalism for multiphase flows
Madhusudan G. Pai et al.
JOURNAL OF FLUID MECHANICS (2009)
CFD SIMULATION OF BOILING FLOWS USING THE VOLUME-OF-FLUID METHOD WITHIN OPENFOAM
Christian Kunkelmann et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2009)
Modeling coupled transport phenomena and mechanical deformation of shrimp during drying in a jet spouted bed dryer
Chalida Niamnuy et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Droplet-droplet interactions in spray drying by using 2D computational fluid dynamics
M. Mezhericher et al.
DRYING TECHNOLOGY (2008)
Pulsating jet impingement heat transfer enhancement
W. Liewkongsataporn et al.
DRYING TECHNOLOGY (2008)
The basics of a reaction engineering approach to modeling air-drying of small droplets or thin-layer materials
Xiao Dong Chen
DRYING TECHNOLOGY (2008)
CFD modeling and experimental validation of heat and mass transfer in wood poles subjected to high temperatures: a conjugate approach
R. Younsi et al.
HEAT AND MASS TRANSFER (2008)
CFD studies on biomass thermochemical conversion
Yiqun Wang et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2008)
Simulation of food drying:: FEM analysis and experimental validation
Stefano Curcio et al.
JOURNAL OF FOOD ENGINEERING (2008)
An assessment of the mechanisms for diffusion in the drying of bananas
R. Baini et al.
JOURNAL OF FOOD ENGINEERING (2008)
Dynamic Model Analysis of Batch Fluidized Bed Dryers
Mingzhong Li et al.
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION (2008)
CFD modeling of the gas-particle flow behavior in spouted beds
Wu Zhonghua et al.
POWDER TECHNOLOGY (2008)
Heat and mass transfer modeling of recirculating flows during air drying of moist objects for various dryer configurations
Ahmet Kaya et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2008)
Thermal drying technologies - Cost-effective innovation aided by mathematical modeling approach
Arun S. Mujumdar et al.
DRYING TECHNOLOGY (2008)
Comparison of the Eulerian and Lagrangian methods for predicting particle transport in enclosed spaces
Z. Zhang et al.
ATMOSPHERIC ENVIRONMENT (2007)
A mathematical model for low-pressure superheated steam drying of a biomaterial
Peamsuk Suvarnakuta et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2007)
Porous media approaches to studying simultaneous heat and mass transfer in food processes. I: Problem formulations
A. K. Datta
JOURNAL OF FOOD ENGINEERING (2007)
Porous media approaches to studying simultaneous heat and mass transfer in food processes. II: Property data and representative results
A. K. Datta
JOURNAL OF FOOD ENGINEERING (2007)
Choosing an appropriate drying model for intermittent and continuous drying of bananas
R. Baini et al.
JOURNAL OF FOOD ENGINEERING (2007)
An analysis of the transport phenomena occurring during food drying process
Maria Aversa et al.
JOURNAL OF FOOD ENGINEERING (2007)
Numerical simulation of fluid bed drying based on two-fluid model and experimental validation
M. R. Assari et al.
APPLIED THERMAL ENGINEERING (2007)
Applications of computational fluid dynamics (CFD) in the modelling and design of ventilation systems in the agricultural industry: A review
Tomas Norton et al.
BIORESOURCE TECHNOLOGY (2007)
Review of discrete particle modeling of fluidized beds
N. G. Deen et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Determination of deformation of a food product undergoing different drying methods and conditions via evolution of a shape factor
Sawitree Panyawong et al.
JOURNAL OF FOOD ENGINEERING (2007)
Modelling local heat and mass transfer in food slabs due to air jet impingement
M. V. De Bonis et al.
JOURNAL OF FOOD ENGINEERING (2007)
Numerical modeling of forced-convection drying of cylindrical moist objects
Ahmet Kaya et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2007)
CFD model of apple atmospheric freeze drying at low temperature
S. Li et al.
DRYING TECHNOLOGY (2007)
What is important in the simulation of spray dryer performance and how do current CFD models perform?
D. F. Fletcher et al.
APPLIED MATHEMATICAL MODELLING (2006)
Grain intermittent drying characteristics analyzed by a simplified model
Yoshio Nishiyama et al.
JOURNAL OF FOOD ENGINEERING (2006)
Computational fluid dynamics prediction and validation of gas circulation in a cheese-ripening room
PS Mirade et al.
INTERNATIONAL DAIRY JOURNAL (2006)
Experimental validation of CFD models for fluidized beds: Influence of particle stress models, gas phase compressibility and air inflow models
K Johansson et al.
CHEMICAL ENGINEERING SCIENCE (2006)
Computational fluid dynamics (CFD) - an effective and efficient design and analysis tool for the food industry: A review
Tomas Norton et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2006)
A review on surface heat and mass transfer coefficients during air chilling and storage of food products
Alain Kondjoyan
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2006)
Validation of the Lagrangian approach for predicting turbulent dispersion and evaporation of droplets within a spray
J. J. Nijdam et al.
DRYING TECHNOLOGY (2006)
A review of drying models including shrinkage effects
ME Katekawa et al.
DRYING TECHNOLOGY (2006)
Simulation of superheated steam drying from coupling models
Arnaud Erriguible et al.
DRYING TECHNOLOGY (2006)
Thin-layer drying of flax fiber: II. Modeling drying process using semi-theoretical and empirical models
A. Ghazanfari et al.
DRYING TECHNOLOGY (2006)
Experimental and computational study of gas-solid fluidized bed hydrodynamics
F Taghipour et al.
CHEMICAL ENGINEERING SCIENCE (2005)
Numerical and experimental investigation of convective drying in unsaturated porous media with bound water
T Lu et al.
HEAT AND MASS TRANSFER (2005)
Transport processes and large deformation during baking of bread
J Zhang et al.
AICHE JOURNAL (2005)
Application of computational fluid dynamics to spray drying
S Lo
LAIT (2005)
On modelling the drying of porous materials: Analytical solutions to coupled partial differential equations governing heat and moisture transfer
D Kulasiri et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2005)
Numerical simulation of particulate flow by the Eulerian-Lagrangian and the Eulerian-Eulerian approach with application to a fluidized bed
M Chiesa et al.
COMPUTERS & CHEMICAL ENGINEERING (2005)
Modeling of heat and mass transfer at the boundary between a porous medium and its surroundings
A Erriguible et al.
DRYING TECHNOLOGY (2005)
Three decades of accomplishments in computational fluid dynamics
JS Shang
PROGRESS IN AEROSPACE SCIENCES (2004)
CFD Modeling of heat and mass transfer in a spouted bed dryer
RG Szafran et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2004)
A new model for thermodynamic analysis of a drying process
I Dincer et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Verification and validation of CFD models and dynamic similarity for fluidized beds
JR Grace et al.
POWDER TECHNOLOGY (2004)
Influence of airflow velocity on kinetics of convection apple drying
D Velic et al.
JOURNAL OF FOOD ENGINEERING (2004)
Numerical modeling of heat and mass transfer in porous medium during combined hot air, infrared and microwaves drying
P Salagnac et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Spray dryer modeling in theory and practice
DE Oakley
DRYING TECHNOLOGY (2004)
Recent developments in numerical modelling of heating and cooling processes in the food industry - a review
LJ Wang et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2003)
Three scale thermomechanical theory for swelling biopolymeric systems
PP Singh et al.
CHEMICAL ENGINEERING SCIENCE (2003)
A new approach to modelling of single droplet drying
M Farid
CHEMICAL ENGINEERING SCIENCE (2003)
Multiscale fluid transport theory for swelling biopolymers
PP Singh et al.
CHEMICAL ENGINEERING SCIENCE (2003)
Eulerian-Eulerian two-fluid model for turbulent gas-liquid bubbly flows
J Chahed et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2003)
A parametric study of the gas flow patterns and drying performance of co-current spray dryer: Results of a computational fluid dynamics study
LX Huang et al.
DRYING TECHNOLOGY (2003)
Simulation of convective drying of wet porous materials
A Hashimoto et al.
DRYING TECHNOLOGY (2003)
Drying kinetics of single porous particles in superheated steam under pressure
AY Looi et al.
CHEMICAL ENGINEERING JOURNAL (2002)
Modeling the transport phenomena and structural changes during deep fat frying - Part II: model solution & validation
R Yamsaengsung et al.
JOURNAL OF FOOD ENGINEERING (2002)
Applications of computational fluid dynamics (CFD) in the food industry: a review
B Xia et al.
COMPUTERS AND ELECTRONICS IN AGRICULTURE (2002)
Superheated steam dryer: simulations and experiments on product drying
F Ducept et al.
CHEMICAL ENGINEERING JOURNAL (2002)
Bouncing motion of spherical particles in fluids
P Gondret et al.
PHYSICS OF FLUIDS (2002)
A theoretical model of brick drying as a conjugate problem
K Murugesan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2001)
Spray drying of food ingredients and applications of CFD in spray drying
TAG Langrish et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2001)
A 2-D pore-network model of the drying of single-component liquids in porous media
AG Yiotis et al.
ADVANCES IN WATER RESOURCES (2001)
Combined superheated steam and microwave drying of sintered glass beads: Drying rate curves
H Shibata et al.
DRYING TECHNOLOGY (2001)
Steam-drying of coal. Part 1. Modeling the behavior of a single particle
Z Chen et al.
FUEL (2000)
Share Paper
