Related references
Note: Only part of the references are listed.Universal relation between the density and the viscosity of dispersions of nanoparticles and stabilized emulsions
Hatim Machrafi
NANOSCALE (2020)
Lubrication effectiveness investigation on the friendly capped MoS2 nanoparticles
Hongxing Wu et al.
LUBRICATION SCIENCE (2017)
Viscosity, density, and thermal conductivity of aluminum oxide and zinc oxide nanolubricants
M. A. Kedzierski et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2017)
Stable dispersion of nanodiamonds in oil and their tribological properties as lubricant additives
Gyoung-Ja Lee et al.
APPLIED SURFACE SCIENCE (2017)
Exfoliation of WS2 in the semiconducting phase using a group of lithium halides: a new method of Li intercalation
Arup Ghorai et al.
DALTON TRANSACTIONS (2016)
CuO Surfaces and CO2 Activation: A Dispersion-Corrected DFT plus U Study
Abhishek Kumar Mishra et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2016)
The effect of heat treatment routes on the retained austenite and Tribomechanical properties of carburized AISI 8620 steel
Sougata Roy et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Nanolubricants developed from tiny CuO nanoparticles
S. M. Alves et al.
TRIBOLOGY INTERNATIONAL (2016)
Tribological properties of oleic acid-modified zinc oxide nanoparticles as the lubricant additive in poly-alpha olefin and diisooctyl sebacate base oils
Lili Wu et al.
RSC ADVANCES (2016)
Tribological properties of polyalphaolefin oil modified with nanocarbon additives
N. Nunn et al.
DIAMOND AND RELATED MATERIALS (2015)
Use of Nanoparticle Tracking Analysis for Particle Size Determination of Dispersed Catalyst in Bitumen and Heavy Oil Fractions
Victor M. Rodriguez-DeVecchis et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Copper oxide nano-particles as friction-reduction and anti-wear additives in lubricating oil
Vijaykumar S. Jatti et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Influence of Cu, TiO2 Nanoparticles and Carbon Nano-Horns on Tribological Properties of Engine Oil
V. Zin et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2015)
Fabrication and thermo-mechanical behavior of ultra-fine porous copper
Marius Kreuzeder et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Comparison of different characterization methods for nanoparticle dispersions before and after aerosolization
Heinz Fissan et al.
ANALYTICAL METHODS (2014)
A review on how the researchers prepare their nanofluids
Zoubida Haddad et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)
Increased response to oxidative stress challenge of nano-copper-induced apoptosis in mesangial cells
Pengjuan Xu et al.
JOURNAL OF NANOPARTICLE RESEARCH (2014)
Mechanical properties of nanoparticles: basics and applications
Dan Guo et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
WS2 nanoparticles - potential replacement for ZDDP and friction modifier additives
M. Ratoi et al.
RSC ADVANCES (2014)
Graphite and Hybrid Nanomaterials as Lubricant Additives
Zhenyu J. Zhang et al.
LUBRICANTS (2014)
The influence of surfactant and ultrasonic processing on improvement of stability, thermal conductivity and viscosity of titania nanofluid
Azadeh Ghadimi et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)
The Synthesis and Effect of Copper Nanoparticles on the Tribological Properties of Lubricant Oils
Valentina Zin et al.
IEEE TRANSACTIONS ON NANOTECHNOLOGY (2013)
New 'chimie douce' approach to the synthesis of hybrid nanosheets of MoS2 on CNT and their anti-friction and anti-wear properties
Claudia Altavilla et al.
NANOTECHNOLOGY (2013)
Controlling colloid charge in nonpolar liquids with surfactants
Gregory N. Smith et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Evaluation of the surface tension of tungsten carbides WC and WC-W2C by the results of the laser diffraction analysis of their milling with iron powder
V. F. Boiko et al.
RUSSIAN JOURNAL OF NON-FERROUS METALS (2013)
Mechanism of Action of WS2 Lubricant Nanoadditives in High-Pressure Contacts
Monica Ratoi et al.
TRIBOLOGY LETTERS (2013)
Tribological properties and lubricant mechanism of Nanoparticle in Engine Oil
M. Asrul et al.
INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013 (2013)
The effects of size and synthesis methods of gold nanoparticle-conjugated MαHIgG4 for use in an immunochromatographic strip test to detect brugian filariasis
Siti Rabizah Makhsin et al.
NANOTECHNOLOGY (2012)
Controlling friction and wear of nc-WC/a-C(Al) nanocomposite coating by lubricant/additive synergies
Shengguo Zhou et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Fundamental understanding of the tribological and thermal behavior of Ag-MoS2 nanoparticle-based multi-component lubricating system
Wenyang Zhang et al.
WEAR (2012)
Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives
M. Kalin et al.
WEAR (2012)
Effect of aggregation on the viscosity of copper oxide-gear oil nanofluids
Madhusree Kole et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)
Ultrasonic-assisted in situ synthesis and characterization of superparamagnetic Fe3O4 nanoparticles
Jie Feng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Tribological properties of oleic acid-modified graphene as lubricant oil additives
Wei Zhang et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2011)
Antiwear properties of carbon-coated copper nanoparticles used as an additive to a polyalphaolefin
J. L. Viesca et al.
TRIBOLOGY INTERNATIONAL (2011)
Nanofluids: Stability, phase diagram, rheology and applications
Yuanqiao Rao
PARTICUOLOGY (2010)
Deformation and friction of MoS2 particles in liquid suspensions used to lubricate sliding contact
Rashmi R. Sahoo et al.
THIN SOLID FILMS (2010)
Tribological behavior of polyalphaolefin with the addition of nickel nanoparticles
R. Chou et al.
TRIBOLOGY INTERNATIONAL (2010)
Influence of Steel Type on the Propensity for Tribochemical Wear in Boundary Lubrication with a Wind Turbine Gear Oil
R. D. Evans et al.
TRIBOLOGY LETTERS (2010)
Tribological behavior of copper nanoparticles as additives in oil
Y. Choi et al.
CURRENT APPLIED PHYSICS (2009)
Production and dispersion stability of nanoparticles in nanofluids
Yujin Hwang et al.
POWDER TECHNOLOGY (2008)
Effect of lubricants on micropitting and wear
E. Laine et al.
TRIBOLOGY INTERNATIONAL (2008)
CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants
A. Hernandez Battez et al.
WEAR (2008)
WS2 nanorods prepared by self-transformation process and their tribological properties as additive in base oil
L. L. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Experimental analysis of tribological properties of lubricating oils with nanoparticle additives
Y. Y. Wu et al.
WEAR (2007)
Surface adsorption phenomenon during the preparation process of nano WC and ultrafine cemented carbide
Li Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2007)
Behavior of fullerene-like WS2 nanoparticles under severe contact conditions
L Rapoport et al.
WEAR (2005)
Friction and wear of fullerene-like WS2 under severe contact conditions:: friction of ceramic materials
L Rapoport et al.
TRIBOLOGY LETTERS (2005)
Ultralow-friction and wear properties of IF-WS2 under boundary lubrication
L Joly-Pottuz et al.
TRIBOLOGY LETTERS (2005)
The effect of WS2 nanoparticles on friction reduction in various lubrication regimes
R Greenberg et al.
TRIBOLOGY LETTERS (2004)
Mechanism of action of colloidal solid dispersions
F Chiñas-Castillo et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2003)
Tribological properties of oleic acid -: modified TiO2 nanoparticle in water
YJ Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
