☆ 4.6 Article

Engineering defects in 2D g-C3N4 for wideband, efficient electromagnetic absorption at elevated temperature

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Heterostructure design of Fe3N alloy/porous carbon nanosheet composites for efficient microwave attenuation

Weihua Gu et al.

Summary: The combination of magnetic/dielectric materials and introduction of porous structure contribute to the optimization of impedance matching property, enhancing microwave absorption capacity. The Fe3N alloy embedded in two-dimensional porous carbon composites fabricated in this study exhibits outstanding microwave absorbing performance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hierarchical composite of biomass derived magnetic carbon framework and phytic acid doped polyanilne with prominent electromagnetic wave absorption capacity

Tianqi Hou et al.

Summary: In this study, a CoFe2O4/C/PANI composite was developed through a green route, showing enhanced microwave absorbing performance and desirable wideband feature.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Fe3O4/α-Fe decorated porous carbon-based composites with adjustable electromagnetic wave absorption: Impedance matching and loading rate

Chong Jia et al.

Summary: The Fe3O4/alpha-Fe decorated 3D porous carbon-based composites exhibit excellent electromagnetic wave absorption performance, with multiphase induced interface polarization and conductive network formed by graphite-like carbon being the main factors. Adjusting the filler loading rate can improve the electromagnetic parameters of the absorber and achieve enhanced electromagnetic wave absorption behavior.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

From intrinsic dielectric loss to geometry patterns: Dual-principles strategy for ultrabroad band microwave absorption

Bin Quan et al.

Summary: This study proposes a dual-principle strategy to investigate the impact of utilizing conductive absorption fillers and artificial structures on absorption performance. By combining microscopic and macroscopic design, the effective operating bandwidth of microwave has been fundamentally extended.

NANO RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Used dye adsorbent derived N-doped magnetic carbon foam with enhanced electromagnetic wave absorption performance

Zhichao Lou et al.

Summary: The increasing excess electromagnetic wave (EMW) radiations induce a serious pollution problem, leading to an urgent need for EMW absorbing materials. This study successfully fabricated magnetic particle-decorated N-doped carbon foams (N-MCFs) with excellent EMW absorption performance. The N-doping content and loading rate were found to have significant effects on the absorption capacity of the materials, which cover the whole C band, X band, and Ku band.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Multidisciplinary Sciences

A flexible electromagnetic wave-electricity harvester

Hualiang Lv et al.

Summary: The study introduces a hybrid Sn@C composite with a biological cell-like splitting ability that enhances the efficiency of converting electromagnetic waves into electricity and heat. This material provides a promising solution for addressing electromagnetic interference with self-powered devices.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

paper Sustainable self-powered electro-Fenton degradation using N, S co-doped porous carbon catalyst fabricated with adsorption-pyrolysis-doping strategy

Chen Chen et al.

Summary: The study addresses the challenge of developing catalysts with high activity and selectivity in the EF system, as well as the controllable output power of a triboelectric nanogenerator for collecting mechanical energy. By using an adsorption-pyrolysis-doping strategy, the researchers were able to tailor the carbon catalyst to achieve efficient electrosynthesis. They also developed a 3D printed revolving roller-compacted triboelectric nanogenerator for self-powering the EF system, resulting in high decolorization efficiency of resistant mixed basic dyes in industrial wastewater.

NANO ENERGY (2021)

Add to Collection

Article Physics, Applied

A reconfigurable active acoustic metalens

Cheng Zhang et al.

Summary: Acoustic metasurfaces have revolutionized control over acoustic waves, showcasing a reconfigurable active acoustic metalens that can scan the focus along arbitrary trajectories in free space. This technology holds great promise for applications such as acoustic levitation and tweezers.

APPLIED PHYSICS LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Graphitic carbon nitride (g-C3N4) in situ polymerization to synthesize MOF-Co@CNTs as efficient electromagnetic microwave absorption materials

Xiaoyu Zhu et al.

Summary: Metal-organic framework (MOF) derivatives, specifically MOF-Co@CNTs, have shown great potential as electromagnetic microwave (EMW) absorbers. Through the pyrolysis of a ZIF-67/g-C3N4 precursor, the researchers were able to produce MOF-Co@CNTs and optimize the carbonization temperature and ratio of g-C3N4 to ZIF-67 for enhanced EMW absorption capacity. The results showed promising EMW absorption performance with high efficiency and broad bandwidth.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

Ti3C2Tx/rGO porous composite films with superior electromagnetic interference shielding performances

Yali Zhang et al.

Summary: The novel method of preparing Ti3C2Tx-based porous EMI shielding composite films with the assistance of graphene oxide resulted in dense surface and porous inside structure, leading to improved EMI shielding effectiveness. The Ti3C2Tx/rGO porous composite films showed superior thermal stability and electrical conductivity, with the potential for application in ultra-thin, light, and flexible EMI shielding materials.

CARBON (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Thermal phase transition controlling electromagnetic wave absorption behavior of PAN fiber derived porous magnetic absorber

Yihan Zhao et al.

Summary: By creatively mixing Fe(acac)(3) with polyacrylonitrile (PAN) spinning solution, magnetic carbon-based composites were prepared in this study. It was found that the increase in pyrolysis temperature caused thermal phase transition resulting in the formation of Fe3C, improving the magnetic and electromagnetic properties. The results provide theoretical and practical experience for the industrial large-scale preparation of a kind of EMW absorbers.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Add to Collection

Article Optics

Hybrid metamaterial absorber for ultra-low and dual-broadband absorption

Cheng Zhang et al.

Summary: This study introduces a hybrid metamaterial absorber composed of graphene films and conventional magnetic absorbing materials, designed for wideband absorption performance at ultra-low frequencies. Experimental results validate the effectiveness of the design method, highlighting its lightweight and environmentally adaptable engineering value.

OPTICS EXPRESS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Lightweight, Flexible Cellulose-Derived Carbon Aerogel@Reduced Graphene Oxide/PDMS Composites with Outstanding EMI Shielding Performances and Excellent Thermal Conductivities

Ping Song et al.

Summary: By dissolving cotton in a NaOH/urea solution, cellulose aerogels were obtained and further processed to prepare cellulose carbon aerogels@reduced graphene oxide aerogels. The resulting composites showed excellent EMI shielding effectiveness, thermal stability, and thermal conductivity, making them promising for lightweight and flexible EMI shielding applications.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Environmentally Friendly and Multifunctional Shaddock Peel-Based Carbon Aerogel for Thermal-Insulation and Microwave Absorption

Weihua Gu et al.

Summary: The eco-friendly shaddock peel-derived carbon aerogels were prepared via freeze-drying method, combining multiple functions such as thermal insulation, compression resistance, and microwave absorption. With minimum reflection loss in X band and wide effective absorption bandwidth, the carbon aerogels can achieve high radar cross-sectional reduction values. The novel computer simulation technology used in this study paves the way for preparing multi-functional microwave absorbers derived from biomass raw materials.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Engineering, Environmental

MXene-based accordion 2D hybrid structure with Co9S8/C/Ti3C2Tx as efficient electromagnetic wave absorber

Tianqi Hou et al.

Summary: The research successfully fabricated a multilayer structure Co9S8/C/Ti(3)C(2)Tx hybrid material, demonstrating impressive electromagnetic absorption performance. It shows a maximum reflection loss of -50.07 dB at 7.6 GHz under a matching thickness of 2.51 mm, with an effective absorption bandwidth (RL <= -10 dB) covering 4.24 GHz.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

A sheath-core shaped ZrO2-SiC/SiO2 fiber felt with continuously distributed SiC for broad-band electromagnetic absorption

Xin Li et al.

Summary: By combining chemical vapor infiltration (CVI) and oxidation treatment, a unique ZrO2-SiC/SiO2 fiber felt with sheath-core structure was prepared based on the impedance matching principle. This structure, forming a large amount of interfaces to enhance the polarization loss, led to excellent EM absorption performance with a reflection loss smaller than -8 dB at 4.50-18 GHz, providing design inspiration for SiC-based EAMs with wide bandwidth strong absorption performance.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Multidisciplinary

In-situ formation of low-dimensional, magnetic core-shell nanocrystal for electromagnetic dissipation

Zhichao Lou et al.

Summary: This study successfully synthesized monodispersed core-shell nanocrystals composed of a magnetic iron-based core and graphitized carbon shell, with controllable core component by altering the amount of lignin. The optimized sub-13-nm-sized Fe-C nanocrystal exhibited an ultra-wide electromagnetic absorption range and a minimum reflection loss value as low as -47.11 dB at 8.0 GHz.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Tailoring energy band gap and microwave absorbing features of graphite-like carbon nitride (g-C3N4)

Reza Peymanfar et al.

Summary: This study focuses on synthesizing g-C3N4 2D structures using innovative methods, and characterizing their properties through various experiments. The research demonstrates that the tailored 2D nanostructures exhibit excellent optical and microwave absorbing features.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hierarchical porous hollow graphitized carbon@MoS2 with wideband EM dissipation capability

Lieji Yang et al.

Summary: Core-shell materials with well-defined structure and optimized parameters show excellent ultra-wideband electromagnetic absorption ability, covering a range of 11.4-18.0 GHz. The development of core-shell composites with controllable physical factors is considered significant for future electromagnetic absorbers.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Graphene-based anisotropic polarization meta-filter

Cheng Zhang et al.

Summary: Artificially engineered metamaterials/metasurfaces offer a unique approach for manipulating the electromagnetic properties of devices, potentially surpassing traditional limits in polarization filters. This paper presents an anisotropic graphene-based meta-filter with features of both a phase-gradient metasurface and an electromagnetic absorber, allowing for versatile beam behaviors and low reflection loss. The design serves as an ideal platform for polarization manipulation, and the performance of the proposed meta-filter is validated through numerical simulation and experimental measurement.

MATERIALS & DESIGN (2021)

Add to Collection

Article Chemistry, Physical

Electrostatically self-assembled two-dimensional magnetized MXene/hollow Fe3O4 nanoparticle hybrids with high electromagnetic absorption performance and improved impendence matching

Baiwen Deng et al.

Summary: In this study, lightweight and highly absorbent two-dimensional magnetized MXene hybrids were synthesized, showing excellent electromagnetic wave absorption performance and making them promising candidates for high-performance electromagnetic microwave absorbers.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

An Electrical Switch-Driven Flexible Electromagnetic Absorber

Hualiang Lv et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Phenolic foam-derived magnetic carbon foams (MCFs) with tunable electromagnetic wave absorption behavior

Zhichao Lou et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

3D hierarchical local heterojunction of MoS2/FeS2 for enhanced microwave absorption

Linshen Xing et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Manufacturing

Fabrication and investigation on ternary heterogeneous MWCNT@TiO2-C fillers and their silicone rubber wave-absorbing composites

Jia Zhao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Multidisciplinary Sciences

Large-scale synthesis of crystalline g-C3N4 nanosheets and high-temperature H2 sieving from assembled films

Luis Francisco Villalobos et al.

SCIENCE ADVANCES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

2D MXenes for Electromagnetic Shielding: A Review

Aamir Iqbal et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

CoFe2O4/N-doped reduced graphene oxide aerogels for high-performance microwave absorption

Xiangyu Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Chemical

Synthesis of Ultralight and Porous Magnetic g-C3N4/g-Carbon Foams with Excellent Electromagnetic Wave (EMW) Absorption Performance and Their Application as a Reinforcing Agent for 3D Printing EMW Absorbers

He Han et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Ti3C2Tx MXene/Ni Chain/ZnO Array Hybrid Nanostructures on Cotton Fabric for Durable Self-Cleaning and Enhanced Microwave Absorption

Shijun Wang et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Physical

Selective tailoring of covalent bonds on graphitized hollow carbon spheres towards controllable porous structure and wideband electromagnetic absorption

Lieji Yang et al.

CARBON (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Lightweight and robust rGO/sugarcane derived hybrid carbon foams with outstanding EMI shielding performance

Lei Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Galvanic Replacement Reaction Involving Core-Shell Magnetic Chains and Orientation-Tunable Microwave Absorption Properties

Biao Zhao et al.

SMALL (2020)

Add to Collection

Article Engineering, Environmental

Simultaneous enhancement of recoverable energy density and efficiency of lead-free relaxor-ferroelectric BNT-based ceramics

Zhenguo Gao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Controllable synthesis of mesoporous carbon hollow microsphere twined by CNT for enhanced microwave absorption performance

Minghang Li et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Review Chemistry, Physical

Sustainable wood-based composites for microwave absorption and electromagnetic interference shielding

Ming Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

2-Dimensional cross-shaped tetrathienonaphthalene-based ladder-type acceptor for high-efficiency organic solar cells

Shao-Ling Chang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-free C-C, C-O, C-S and C-N bond formation enabled by SBA-15 supported TFMSA

Xiangyan Yi et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Synthesis of porous carbon matrix with inlaid Fe3C/Fe3O4 micro-particles as an effective electromagnetic wave absorber from natural wood shavings

Zhichao Lou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Facile synthesis of reduced graphene oxide-wrapped CNFs with controllable chemical reduction degree for enhanced microwave absorption performance

Xiaoxiao Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection

Article Engineering, Environmental

Paramagnetic CoS2@MoS2 core-shell composites coated by reduced graphene oxide as broadband and tunable high-performance microwave absorbers

Tao Zhu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Physics, Multidisciplinary

Effects of carbon doping and vacancy defect on the magnetism of anatase TiO2

Qingyu Hou et al.

PHYSICS LETTERS A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Flexible Microwave Shield with Tunable Frequency-Transmission and Electromagnetic Compatibility

Hualiang Lv et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Voltage-Boosting Strategy Enabling a Low-Frequency, Flexible Electromagnetic Wave Absorption Device

Hualiang Lv et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Materials Science, Ceramics

Assembled porous Fe3O4@g-C3N4 hybrid nanocomposites with multiple interface polarization for stable microwave absorption

Jieyi Yu et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Physical

Impact of morphology and dielectric property on the microwave absorbing performance of MoS2-based materials

Weidong Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Physical

High-performance microwave absorption materials based on MoS2-graphene isomorphic hetero-structures

Deqing Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Hollow Ni-Co layered double hydroxides-derived NiCo-alloy@g-C3N4 microtubule with high-performance microwave absorption

Saichun Hu et al.

MATERIALS LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Electrochemical synthesis of phosphorus-doped graphene quantum dots for free radical scavenging

Yan Li et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Mechanical properties of graphene and graphene-based nanocomposites

Dimitrios G. Papageorgiou et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection

Review Materials Science, Multidisciplinary

A brief introduction to the fabrication and synthesis of graphene based composites for the realization of electromagnetic absorbing materials

Hualiang Lv et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Article Nanoscience & Nanotechnology

MoS2-Based Mixed-Dimensional van der Waals Heterostructures: A New Platform for Excellent and Controllable Microwave-Absorption Performance

Yuan Sun et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Interface Polarization Strategy to Solve Electromagnetic Wave Interference Issue

Hualiang Lv et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Interface Strategy To Achieve Tunable High Frequency Attenuation

Hualiang Lv et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?

Wee-Jun Ong et al.

CHEMICAL REVIEWS (2016)

Add to Collection

Article Chemistry, Physical

Achieving excellent bandwidth absorption by a mirror growth process of magnetic porous polyhedron structures

Hualiang Lv et al.

NANO RESEARCH (2016)

Add to Collection

Article Chemistry, Physical

Development of Novel Graphene/g-C3N4 Composite with Broad-Frequency and Light-Weight Features

Hualiang Lv et al.

PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Coin-like α-Fe2O3@CoFe2O4 Core-Shell Composites with Excellent Electromagnetic Absorption Performance

Hualiang Lv et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Hybrid of MoS2 and Reduced Graphene Oxide: A Lightweight and Broadband Electromagnetic Wave Absorber

Yanfang Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Porous Three-Dimensional Flower-like Co/CoO and Its Excellent Electromagnetic Absorption Properties

Hualiang Lv et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Achieving hierarchical hollow carbon@Fe@Fe3O4 nanospheres with superior microwave absorption properties and lightweight features

Hualiang Lv et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

Add to Collection

Article Materials Science, Multidisciplinary

A novel rod-like MnO2@Fe loading on graphene giving excellent electromagnetic absorption properties

Hualiang Lv et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.