Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers

This study investigates the effect of the addition of steel and polypropylene fibers on the mechanical and some durability properties of high-strength concrete (HSC). Hooked-end steel fibers with a 60-mm length were used at four different fiber volume fractions of 0.25%, 0.50%, 0.75%, and 1.0%. Polypropylene fibers with a 12-mm length were used at the content of 0.15%, 0.30%, and 0.45%. Some mixtures were produced with the combination of steel and polypropylene fibers at a total fiber volume fraction of 1.0% by volume of concrete, in order to study the effect of fiber hybridization. All the fiber-reinforced concretes contained 10% silica fume as a cement replacement. The compressive strength, splitting tensile strength, flexural strength, electrical resistivity, and water absorption of the concrete mixes were examined. Results of the experimental study indicate that addition of silica fume improves both mechanical and durability properties of plain concrete. The results also indicate that incorporation of steel and polypropylene fibers improved the mechanical properties of HSC at each volume fraction considered in this study. Furthermore, it was observed that the addition of 1% steel fiber significantly enhanced the splitting tensile strength and flexural strength of concrete. Among different combinations of steel and polypropylene fibers investigated, the best performance was attained by a mixture that contained 0.85% steel and 0.15% polypropylene fiber. Finally, the results show that introducing fibers to concrete resulted in a decrease in water absorption and, depending on the type of fibers, significant or slight reduction in the electrical resistivity of concrete compared to those of the companion plain concrete. (C) 2015 Elsevier Ltd. All rights reserved.