4.6 Article

The role of polymers in lithium solid-state batteries with inorganic solid electrolytes

Related references

Note: Only part of the references are listed.
Review Chemistry, Physical

Anode-Free Full Cells: A Pathway to High-Energy Density Lithium-Metal Batteries

Sanjay Nanda et al.

Summary: The anode-free full cell configuration is ideal for high energy density and lithium storage, but poor efficiencies of lithium plating and stripping lead to short cycle life. Recent studies have shown that advanced electrolytes and other methods can stabilize lithium deposition and improve cycle life.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Interfacial challenges for all-solid-state batteries based on sulfide solid electrolytes

Shuo Wang et al.

Summary: Sulfide solid electrolytes have the highest room-temperature ionic conductivity among solid Li-ion conductors, making them attractive for high energy-density and safe all-solid-state batteries. However, interfacial issues between sulfide electrolytes and electrodes, such as instability and side reactions, pose challenges for their application in ASSBs.

JOURNAL OF MATERIOMICS (2021)

Article Nanoscience & Nanotechnology

Effect of Organic Electrolyte on the Performance of Solid Electrolyte for Solid-Liquid Hybrid Lithium Batteries

Jiantao Tang et al.

Summary: By designing a hybrid electrolyte with a combination of inorganic solid electrolyte and liquid organic electrolyte, the electrochemical performance of the solid-liquid hybrid battery was significantly improved, eliminating the larger interface impedance issue. The liquid organic electrolyte played a crucial role in forming a solid-liquid electrolyte interphase, wetting the electrode and solid electrolyte, and improving interfacial Li-ion transport.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Electrochemistry

Theory of coupled ion-electron transfer kinetics

Dimitrios Fraggedakis et al.

Summary: The microscopic theory of chemical reactions is based on transition state theory, where coupled ion-electron transfer is developed to facilitate non-adiabatic electron transfer. The general formula of the reaction rate derived in this theory depends on various factors, including overpotential, solvent properties, electronic structure, and ion chemical potential in the transition state. This theory has been successfully applied to Li-ion batteries and accurately predicts the concentration dependence of reaction rates.

ELECTROCHIMICA ACTA (2021)

Article Multidisciplinary Sciences

A flexible electron-blocking interfacial shield for dendrite-free solid lithium metal batteries

Hanyu Huo et al.

Summary: The high electronic conductivity of solid-state electrolytes leads to Li dendrite growth, thus hindering the commercialization of solid-state batteries. Here, the authors propose a flexible electron-blocking interface to protect garnet electrolytes from the electronic degradation.

NATURE COMMUNICATIONS (2021)

Review Chemistry, Physical

Polymers in Lithium-Ion and Lithium Metal Batteries

Junheng Li et al.

Summary: Researchers are exploring alternative battery materials to enhance overall energy density and ensure safety in lithium-ion batteries. Although current polymer materials have made progress in addressing battery issues, novel polymer chemistries may offer better performance and reliability.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Insight into Prolonged Cycling Life of 4 V All-Solid-State Polymer Batteries by a High-Voltage Stable Binder

Jianneng Liang et al.

Summary: This study investigates the performance of various binders in 4V class all-solid-state polymer batteries, revealing that CRP binders exhibit superior cycling performance and high voltage stability compared to PEO and PVDF binders, contributing to stable cathode/SPE interfaces and enabling long cycling life and high performance ASSPBs.

ADVANCED ENERGY MATERIALS (2021)

Article Polymer Science

100th Anniversary of Macromolecular Science Viewpoint: Solid Polymer Electrolytes in Cathode Electrodes for Lithium Batteries. Current Challenges and Future Opportunities

Shrayesh N. Patel

Summary: The importance of understanding the interfacial behavior of solid polymer electrolytes (SPEs) in all-solid cathode composite electrodes (CCEs) is highlighted in enabling safe and high-energy-density lithium batteries. Challenges and opportunities in achieving and maintaining good interfacial contact, utilizing interfacial dynamics and nanoconfinement for enhancing ion transport, and developing SPEs with high-voltage stability are discussed as pathways towards next-generation higher-energy batteries.

ACS MACRO LETTERS (2021)

Review Polymer Science

Challenges in Solvent-Free Methods for Manufacturing Electrodes and Electrolytes for Lithium-Based Batteries

Nina Verdier et al.

Summary: The challenges of lithium battery manufacturing lie in cost and environmental impact. Solvent-casting method is commonly used but has disadvantages. Solvent-free processes, including heat-based and spray-based methods, show promise in developing cost-effective and environmentally friendly lithium batteries. Among these methods, hot-pressing and melt processing are the most commonly used alternatives for both polymer-based electrolytes and electrodes.

POLYMERS (2021)

Article Chemistry, Physical

On the Additive Microstructure in Composite Cathodes and Alumina-Coated Carbon Microwires for Improved All-Solid-State Batteries

Simon Randau et al.

Summary: The study investigates the influence of different morphologies and surface areas of carbon additives on the performance of all-solid-state batteries, revealing that fiber-shaped vapor-grown carbon additives can enhance cathode active material utilization, while particle-shaped carbons have minor effects. However, carbon additives generally lead to accelerated capacity loss and increased formation of solid electrolyte decomposition products. A protection concept involving alumina coating on carbon fibers is developed to minimize electrolyte degradation and enhance overall battery performance.

CHEMISTRY OF MATERIALS (2021)

Review Chemistry, Physical

A review of rational design and investigation of binders applied in silicon-based anodes for lithium-ion batteries

Shi Li et al.

Summary: The review systematically summarizes the synthesis methods, design principles, and working mechanisms of synthetic binders and natural biomass binders, including chemical composition, superstructure, and various interactions between different functional moieties. These findings aim to reveal the structure-composition-performance relationship, offer practical solutions to challenging problems associated with defects of Si-based electrode materials in LIBs, and provide design principles for other electrode binders in rechargeable batteries at an industrial level.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Polycrystalline and Single Crystalline NCM Cathode Materials-Quantifying Particle Cracking, Active Surface Area, and Lithium Diffusion

Enrico Trevisanello et al.

Summary: The NCM family of cathode active materials with high nickel content is becoming the preferred choice for high performance lithium-ion batteries. Study shows that cracking of polycrystalline particles of NCM is not only detrimental, but also helps achieve higher reversible capacities and rate capability. Optimization of CAM size and morphology is crucial for achieving good rate capability with high-nickel NCMs.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Tailoring Slurries Using Cosolvents and Li Salt Targeting Practical All-Solid-State Batteries Employing Sulfide Solid Electrolytes

Kyu Tae Kim et al.

Summary: In this study, a new scalable fabrication protocol for a Li+-conductive dry polymer electrolyte (DPE)-type binder, nitrile-butadiene rubber (NBR)-LiTFSI, is reported. The dispersion of NBR can be controlled by adjusting the fraction of antisolvent in the cosolvents, ultimately affecting the performance of all-solid-state Li batteries. Sheet-type electrodes tailored using NBR-LiTFSI demonstrate superior capacity and initial Coulombic efficiency compared to those prepared using conventional insulating binder, attributed to facilitated interfacial Li+ transport.

ADVANCED ENERGY MATERIALS (2021)

Article Energy & Fuels

Corrosion of lithium metal anodes during calendar ageing and its microscopic origins

David T. Boyle et al.

Summary: Rechargeable lithium metal batteries must have a long cycle life and calendar life. The loss of capacity during calendar ageing is caused by chemical corrosion of Li and the continuous growth of the solid electrolyte interphase. Functional electrolytes must minimize the rate of solid electrolyte interphase growth and the surface area of electrodeposited Li metal to ensure long battery life.

NATURE ENERGY (2021)

Article Chemistry, Physical

Gel composite electrolyte - an effective way to utilize ceramic fillers in lithium batteries

X. Chelsea Chen et al.

Summary: The study utilizes discrete ceramic fillers and polymer materials to form a gel composite electrolyte with enhanced transport properties for lithium metal batteries. The incorporation of doped-lithium aluminum titanium phosphate particles greatly improves the membrane's cycling characteristics against the lithium electrode, maintaining mechanical properties and processability of the composite membrane. This work provides insight into the design strategy for a safe electrolyte towards stable Li metal batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Electrochemistry

Working Principle of an Ionic Liquid Interlayer During Pressureless Lithium Stripping on Li6.25Al0.25La3Zr2O12 (LLZO) Garnet-Type Solid Electrolyte

Till Fuchs et al.

Summary: This study investigates the use of ionic liquids as self-adjusting interlayers in solid-state batteries to compensate for morphological changes of the lithium anode. The proposed method improves the efficiency of lithium dissolution process, allowing for continuous stripping of lithium without the need for external pressure during assembly and testing. The research provides insights into the impedance response and lithium stripping in electrodes with liquid interlayers, laying the groundwork for future optimization.

BATTERIES & SUPERCAPS (2021)

Review Chemistry, Physical

Solid-State Li-Metal Batteries: Challenges and Horizons of Oxide and Sulfide Solid Electrolytes and Their Interfaces

Kun Joong Kim et al.

Summary: The introduction of new, safe, and reliable solid-electrolyte chemistries and technologies can potentially overcome the challenges facing their liquid counterparts while widening the breadth of possible applications. Through analyzing the transition from liquid-based Li-ion batteries (LIBs) to all-solid-state Li-metal batteries (ASSLBs), a roadmap for the development of a successful oxide and sulfide-based ASSLB is introduced, focusing on interfacial challenges and considering parameters such as energy density, power density, longterm stability, processing, and safety.

ADVANCED ENERGY MATERIALS (2021)

Article Polymer Science

Polymer Chemistry for Improving Lithium Metal Anodes

Sipei Li et al.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2020)

Article Multidisciplinary Sciences

Single lithium-ion channel polymer binder for stabilizing sulfur cathodes

Chaoqun Niu et al.

NATIONAL SCIENCE REVIEW (2020)

Article Nanoscience & Nanotechnology

Interphase Formation of PEO20:LiTFSI-Li6PS5Cl Composite Electrolytes with Lithium Metal

Fabian J. Simon et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Modeling Effective Ionic Conductivity and Binder Influence in Composite Cathodes for All-Solid-State Batteries

Anja Bielefeld et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Physical

Protective coatings for lithium metal anodes: Recent progress and future perspectives

Hongyao Zhou et al.

JOURNAL OF POWER SOURCES (2020)

Article Polymer Science

One-pot synthesis of polymeric LiPON

Gideon Abels et al.

POLYMER (2020)

Article Chemistry, Physical

Increasing Poly(ethylene oxide) Stability to 4.5 V by Surface Coating of the Cathode

Kaihui Nie et al.

ACS ENERGY LETTERS (2020)

Article Energy & Fuels

High-nickel layered oxide cathodes for lithium-based automotive batteries

Wangda Li et al.

NATURE ENERGY (2020)

Review Nanoscience & Nanotechnology

Designing solid-state electrolytes for safe, energy-dense batteries

Qing Zhao et al.

NATURE REVIEWS MATERIALS (2020)

Review Nanoscience & Nanotechnology

Understanding interface stability in solid-state batteries

Yihan Xiao et al.

NATURE REVIEWS MATERIALS (2020)

Review Materials Science, Multidisciplinary

Review of ionic liquids containing, polymer/inorganic hybrid electrolytes for lithium metal batteries

Guang Yang et al.

MATERIALS & DESIGN (2020)

Article Energy & Fuels

Benchmarking the performance of all-solid-state lithium batteries

Simon Randau et al.

NATURE ENERGY (2020)

Review Chemistry, Physical

Charge transport in high-mobility conjugated polymers and molecular semiconductors

Simone Fratini et al.

NATURE MATERIALS (2020)

Review Nanoscience & Nanotechnology

From nanoscale interface characterization to sustainable energy storage using all-solid-state batteries

Darren H. S. Tan et al.

NATURE NANOTECHNOLOGY (2020)

Review Chemistry, Multidisciplinary

Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries

Thorben Krauskopf et al.

CHEMICAL REVIEWS (2020)

Article Nanoscience & Nanotechnology

A polymeric composite protective layer for stable Li metal anodes

Suogang Guo et al.

NANO CONVERGENCE (2020)

Review Chemistry, Physical

Interface Engineering for Lithium Metal Anodes in Liquid Electrolyte

Pengbo Zhai et al.

ADVANCED ENERGY MATERIALS (2020)

Review Chemistry, Physical

A Review of the Design of Advanced Binders for High-Performance Batteries

Feng Zou et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

The Formation of the Solid/Liquid Electrolyte Interphase (SLEI) on NASICON-Type Glass Ceramics and LiPON

Martin R. Busche et al.

ADVANCED MATERIALS INTERFACES (2020)

Article Materials Science, Multidisciplinary

A quantitative correlation between macromolecular crystallinity and ionic conductivity in polymer-ceramic composite solid electrolytes

Xintong Mei et al.

MATERIALS TODAY COMMUNICATIONS (2020)

Review Energy & Fuels

Recent Developments and Challenges in Hybrid Solid Electrolytes for Lithium-Ion Batteries

Lu Han et al.

FRONTIERS IN ENERGY RESEARCH (2020)

Article Chemistry, Multidisciplinary

Lowering the Interfacial Resistance in Li6.4La3Zr1.4Ta0.6O12| Poly(Ethylene Oxide) Composite Electrolytes

Eveline Kuhnert et al.

CELL REPORTS PHYSICAL SCIENCE (2020)

Article Electrochemistry

Influence of NCM Particle Cracking on Kinetics of Lithium-Ion Batteries with Liquid or Solid Electrolyte

Raffael Ruess et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Review Electrochemistry

From Liquid- to Solid-State Batteries: Ion Transfer Kinetics of Heteroionic Interfaces

Manuel Weiss et al.

ELECTROCHEMICAL ENERGY REVIEWS (2020)

Article Chemistry, Physical

Characterization of mechanical degradation in an all-solid-state battery cathode

Tan Shi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

Nanoscale Mapping of Extrinsic Interfaces in Hybrid Solid Electrolytes

Marm B. Dixit et al.

JOULE (2020)

Article Chemistry, Physical

The Interface between Li6.5La3Zr1.5Ta0.5O12 and Liquid Electrolyte

Jingyuan Liu et al.

JOULE (2020)

Article Energy & Fuels

2020 roadmap on solid-state batteries

Mauro Pasta et al.

JOURNAL OF PHYSICS-ENERGY (2020)

Article Chemistry, Physical

A Long Cycle Life, All-Solid-State Lithium Battery with a Ceramic-Polymer Composite Electrolyte

Xingwen Yu et al.

ACS APPLIED ENERGY MATERIALS (2020)

Review Chemistry, Multidisciplinary

Progress and perspectives on halide lithium conductors for all-solid-state lithium batteries

Xiaona Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Review Electrochemistry

Review-Conducting Polymer-Based Binders for Lithium-Ion Batteries and Beyond

Van At Nguyen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Electrochemistry

Polymer-in-Ceramic Nanocomposite Solid Electrolyte for Lithium Metal Batteries Encompassing PEO-Grafted TiO2 Nanocrystals

Francesco Colombo et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Chemistry, Physical

Lithium Metal Protection by a Cross-Linked Polymer Ionic Liquid and Its Application in Lithium Battery

C. Andrea Calderon et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Chemistry, Physical

A three-dimensional interconnected polymer/ceramic composite as a thin film solid electrolyte

Max J. Palmer et al.

ENERGY STORAGE MATERIALS (2020)

Article Electrochemistry

Improved Stability and Cyclability of Ceramic Solid Electrolyte by Coating Polymer

Yanli Yin et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Review Electrochemistry

Review-Polymer Electrolytes for Rechargeable Batteries: From Nanocomposite to Nanohybrid

Nicola Boaretto et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Chemistry, Physical

Dissolution of Lithium Metal in Poly(ethylene oxide)

Michael D. Galluzzo et al.

ACS ENERGY LETTERS (2019)

Article Zoology

The Integrative Biology of Gecko Adhesion: Historical Review, Current Understanding, and Grand Challenges

Anthony P. Russell et al.

INTEGRATIVE AND COMPARATIVE BIOLOGY (2019)

Article Chemistry, Physical

High lithium-ion conductivity polymer film to suppress dendrites in Li metal batteries

Hongyu Dong et al.

JOURNAL OF POWER SOURCES (2019)

Review Nanoscience & Nanotechnology

Designing polymers for advanced battery chemistries

Jeffrey Lopez et al.

NATURE REVIEWS MATERIALS (2019)

Article Multidisciplinary Sciences

Stabilizing polymer electrolytes in high-voltage lithium batteries

Snehashis Choudhury et al.

NATURE COMMUNICATIONS (2019)

Article Nanoscience & Nanotechnology

Properties of the Interphase Formed between Argyrodite-Type Li6PS5Cl and Polymer-Based PEO10:LiTFSI

Fabian J. Simon et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

Catalyst-Free Dynamic Networks for Recyclable, Self-Healing Solid Polymer Electrolytes

Brian B. Jing et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Chemistry, Multidisciplinary

Double-Layer Polymer Electrolyte for High-Voltage All-Solid-State Rechargeable Batteries

Weidong Zhou et al.

ADVANCED MATERIALS (2019)

Review Chemistry, Multidisciplinary

Designed Nanoarchitectures by Electrostatic Spray Deposition for Energy Storage

Changbao Zhu et al.

ADVANCED MATERIALS (2019)

Article Nanoscience & Nanotechnology

Space-Charge Effects at the Li7La3Zr2O12/Poly(ethylene oxide) Interface

Doriano Brogioli et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Visualizing percolation and ion transport in hybrid solid electrolytes for Li-metal batteries

Wahid Zaman et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Multidisciplinary

Prospects of production technologies and manufacturing costs of oxide-based all-solid-state lithium batteries

Joscha Schnell et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Physical

Decoupling segmental relaxation and ionic conductivity for lithium-ion polymer electrolytes

Dominic Bresser et al.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2019)

Article Chemistry, Physical

Interface-Enabled Ion Conduction in Li10GeP2S12-Poly(ethylene Oxide) Hybrid Electrolytes

Jin Zheng et al.

ACS APPLIED ENERGY MATERIALS (2019)

Article Chemistry, Physical

Study of segmental dynamics and ion transport in polymer-ceramic composite electrolytes by quasi-elastic neutron scattering

X. Chelsea Chen et al.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2019)

Article Chemistry, Physical

Enabling Thin and Flexible Solid-State Composite Electrolytes by the Scalable Solution Process

Darren H. S. Tan et al.

ACS APPLIED ENERGY MATERIALS (2019)

Article Electrochemistry

Controlling Ionic Transport through the PEO-LiTFSI/LLZTO Interface

Arushi Gupta et al.

ELECTROCHEMICAL SOCIETY INTERFACE (2019)

Article Chemistry, Physical

Nanothin film conductivity measurements reveal interfacial influence on ion transport in polymer electrolytes

Ban Xuan Dong et al.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2019)

Article Chemistry, Physical

Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach

Felix Hippauf et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Physical

Assessing structure and stability of polymer/lithium-metal interfaces from first-principles calculations

Mahsa Ebadi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Physical

Lithium-Metal Growth Kinetics on LLZO Garnet-Type Solid Electrolytes

Thorben Krauskopf et al.

JOULE (2019)

Review Chemistry, Multidisciplinary

Understanding Conversion-Type Electrodes for Lithium Rechargeable Batteries

Seung-Ho Yu et al.

ACCOUNTS OF CHEMICAL RESEARCH (2018)

Article Nanoscience & Nanotechnology

Conductive Polymers Encapsulation To Enhance Electrochemical Performance of Ni-Rich Cathode Materials for Li-Ion Batteries

Yanbing Cao et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Nanoscience & Nanotechnology

Directly Formed Alucone on Lithium Metal for High-Performance Li Batteries and Li-S Batteries with High Sulfur Mass Loading

Lin Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Physical

Linear and Cross-Linked Ionic Liquid Polymers as Binders in Lithium-Sulfur Batteries

Alen Vizintin et al.

CHEMISTRY OF MATERIALS (2018)

Article Chemistry, Multidisciplinary

Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries

Stefanie Zekoll et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Multidisciplinary

Chemo-mechanical expansion of lithium electrode materials - on the route to mechanically optimized all-solid-state batteries

Raimund Koerver et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

All-solid-state lithium-ion and lithium metal batteries - paving the way to large-scale production

Joscha Schnell et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

Demonstration of high current densities and extended cycling in the garnet Li7La3Zr2O12 solid electrolyte

Nathan J. Taylor et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

Hybrid electrolytes for lithium metal batteries

Marlou Keller et al.

JOURNAL OF POWER SOURCES (2018)

Review Chemistry, Physical

Ionogel Electrolytes for High-Performance Lithium Batteries: A Review

Nan Chen et al.

ADVANCED ENERGY MATERIALS (2018)

Review Chemistry, Physical

Molecular Layer Deposition for Energy Conversion and Storage

Yang Zhao et al.

ACS ENERGY LETTERS (2018)

Article Chemistry, Multidisciplinary

Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries

Xiulin Fan et al.

Article Chemistry, Multidisciplinary

Effects of Polymer Coatings on Electrodeposited Lithium Metal

Jeffrey Lopez et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Electrochemistry

Evaluating the Effects of Temperature and Pressure on Li/PEO-LiTFSI Interfacial Stability and Kinetics

A. Gupta et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Article Electrochemistry

Slurry-Based Processing of Solid Electrolytes: A Comparative Binder Study

Nathalie Riphaus et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Review Electrochemistry

Recent Advancements in Polymer-Based Composite Electrolytes for Rechargeable Lithium Batteries

Shuang-Jie Tan et al.

ELECTROCHEMICAL ENERGY REVIEWS (2018)

Article Chemistry, Physical

Charge-transport model for conducting polymers

Stephen Dongmin Kang et al.

NATURE MATERIALS (2017)

Article Chemistry, Multidisciplinary

Three-dimensional bilayer garnet solid electrolyte based high energy density lithium metal-sulfur batteries

Kun (Kelvin) Fu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Review Chemistry, Multidisciplinary

Conversion cathodes for rechargeable lithium and lithium-ion batteries

Feixiang Wu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Physical

Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathode Materials for Li-Ion Batteries

Aleksandr O. Kondrakov et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Article Chemistry, Multidisciplinary

Interfacial Chemistry Regulation via a Skin-Grafting Strategy Enables High-Performance Lithium-Metal Batteries

Yue Gao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Electrochemistry

Selection of Binder and Solvent for Solution-Processed All-Solid-State Battery

Kyulin Lee et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Electrochemistry

All-Solid-State Battery Electrode Sheets Prepared by a Slurry Coating Process

Atsushi Sakuda et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Electrochemistry

Impedance Spectroscopy Analysis of the Lithium Ion Transport through the Li7La3Zr2O12/P(EO)20Li Interface

Frederieke Langer et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Electrochemistry

XPS and SIMS Analysis of Solid Electrolyte Interphases on Lithium Formed by Ether-Based Electrolytes

Carsten Fiedler et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Review Electrochemistry

Review-SEI: Past, Present and Future

E. Peled et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Chemistry, Physical

Garnet/polymer hybrid ion-conducting protective layer for stable lithium metal anode

Chunpeng Yang et al.

NANO RESEARCH (2017)

Article Nanoscience & Nanotechnology

Effect of Different Binders on the Electrochemical Performance of Metal Oxide Anode for Lithium-Ion Batteries

Rui Wang et al.

NANOSCALE RESEARCH LETTERS (2017)

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Article Chemistry, Physical

Lithium dendrite growth mechanisms in polymer electrolytes and prevention strategies

Pallab Barai et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Article Chemistry, Physical

Redox activity of argyrodite Li6PS5Cl electrolyte in all-solid-state Li-ion battery: An XPS study

Jeremie Auvergniot et al.

SOLID STATE IONICS (2017)

Article Chemistry, Physical

Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes

Lukas Porz et al.

ADVANCED ENERGY MATERIALS (2017)

Article Nanoscience & Nanotechnology

Effect of Different Binders on the Electrochemical Performance of Metal Oxide Anode for Lithium-Ion Batteries

Rui Wang et al.

NANOSCALE RESEARCH LETTERS (2017)

Review Nanoscience & Nanotechnology

Lithium battery chemistries enabled by solid-state electrolytes

Arumugam Manthiram et al.

NATURE REVIEWS MATERIALS (2017)

Review Chemistry, Multidisciplinary

Material and Structural Design of Novel Binder Systems for High-Energy, High-Power Lithium-Ion Batteries

Ye Shi et al.

ACCOUNTS OF CHEMICAL RESEARCH (2017)

Review Chemistry, Multidisciplinary

Protected Lithium-Metal Anodes in Batteries: From Liquid to Solid

Chunpeng Yang et al.

ADVANCED MATERIALS (2017)

Review Chemistry, Multidisciplinary

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review

Xin-Bing Cheng et al.

CHEMICAL REVIEWS (2017)

Review Chemistry, Multidisciplinary

High-voltage positive electrode materials for lithium-ion batteries

Wangda Li et al.

CHEMICAL SOCIETY REVIEWS (2017)

Article Electrochemistry

IONIC CONDUCTIVITY AND LITHIUM TRANSFERENCE NUMBER OF POLY (ETHYLENE OXIDE):LiTFSI SYSTEM

K. Pozyczka et al.

ELECTROCHIMICA ACTA (2017)

Review Chemistry, Multidisciplinary

Single lithium-ion conducting solid polymer electrolytes: advances and perspectives

Heng Zhang et al.

CHEMICAL SOCIETY REVIEWS (2017)

Article Chemistry, Physical

Li+ Solvation and Ionic Transport in Lithium Solvate Ionic Liquids Diluted by Molecular Solvents

Kazuhide Ueno et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Article Multidisciplinary Sciences

Compliant glass-polymer hybrid single ion-conducting electrolytes for lithium batteries

Irune Villaluenga et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Article Nanoscience & Nanotechnology

Single-Ion Block Copoly(ionic liquid)s as Electrolytes for All-Solid State Lithium Batteries

Luca Porcarelli et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte

Weidong Zhou et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

Dynamic formation of a solid-liquid electrolyte interphase and its consequences for hybrid-battery concepts

Martin R. Busche et al.

NATURE CHEMISTRY (2016)

Article Multidisciplinary Sciences

Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries

Kun (Kelvin) Fu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Article Multidisciplinary Sciences

Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries

Brandon Ludwig et al.

SCIENTIFIC REPORTS (2016)

Article Nanoscience & Nanotechnology

Lithium Fluoride Additives for Stable Cycling of Lithium Batteries at High Current Densities

Snehashis Choudhury et al.

ADVANCED ELECTRONIC MATERIALS (2016)

Editorial Material Energy & Fuels

A solid future for battery development

Juergen Janek et al.

NATURE ENERGY (2016)

Editorial Material Chemistry, Physical

ocrExpanding the Ragone Plot: Pushing the Limits of Energy Storage

Bryan D. McCloskey

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Chemistry, Physical

Electrode-Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights

Magali Gauthier et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Electrochemistry

All Solid-State Lithium Batteries Assembled with Hybrid Solid Electrolytes

Yun-Chae Jung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Article Chemistry, Physical

Interface reactions between LiPON and lithium studied by in-situ X-ray photoemission

Andre Schwoebel et al.

SOLID STATE IONICS (2015)

Review Chemistry, Physical

Poly(ethylene oxide)-based electrolytes for lithium-ion batteries

Zhigang Xue et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Chemistry, Physical

Solid Electrolyte: the Key for High-Voltage Lithium Batteries

Juchuan Li et al.

ADVANCED ENERGY MATERIALS (2015)

Article Nanoscience & Nanotechnology

Improvement of the Cycling Performance of LiNi0.6Co0.2Mn0.2O2 Cathode Active Materials by a Dual-Conductive Polymer Coating

Sea Hee Ju et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Electrochemistry

Impedance Characterization of Li Ion Transport at the Interface between Laminated Ceramic and Polymeric Electrolytes

W. E. Tenhaeff et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Article Chemistry, Physical

Effect of molecular weight on conductivity of polymer electrolytes

Alexander A. Teran et al.

SOLID STATE IONICS (2011)

Review Polymer Science

Adhesion of polymers

Firas Awaja et al.

PROGRESS IN POLYMER SCIENCE (2009)

Article Electrochemistry

The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces

C Monroe et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Article Electrochemistry

The effect of interfacial deformation on electrodeposition kinetics

C Monroe et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Review Chemistry, Multidisciplinary

Nonaqueous liquid electrolytes for lithium-based rechargeable batteries

K Xu

CHEMICAL REVIEWS (2004)

Article Electrochemistry

An EIS study of the anode Li/PEO-LiTFSI of a Li polymer battery

R Bouchet et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)

Article Polymer Science

Adsorption of nanocolloidal SiO2 particles on PEO brushes

RA Gage et al.

MACROMOLECULES (2001)

Article Chemistry, Physical

Thin-film lithium and lithium-ion batteries

JB Bates et al.

SOLID STATE IONICS (2000)

Article Materials Science, Multidisciplinary

Polymer electrolytes: Ionic transport mechanisms and relaxation coupling

MA Ratner et al.

MRS BULLETIN (2000)