Related references
Note: Only part of the references are listed.A new acoustic emission on-line monitoring method of laser shock peening
Jiajun Wu et al.
OPTIK (2020)
Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
Anton du Plessis et al.
MATERIALS & DESIGN (2020)
Toward the digital twin of additive manufacturing: Integrating thermal simulations, sensing, and analytics to detect process faults
Aniruddha Gaikwad et al.
IISE TRANSACTIONS (2020)
Microstructure evolution and mechanical property response via 3D printing parameter development of Al-Sc alloy
C. N. Kuo et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Laser Induced Phased Arrays (LIPA) to detect nested features in additively manufactured components
Don Pieris et al.
MATERIALS & DESIGN (2020)
Process optimization of complex geometries using feed forward control for laser powder bed fusion additive manufacturing
C. L. Druzgalski et al.
ADDITIVE MANUFACTURING (2020)
Processing parameters in laser powder bed fusion metal additive manufacturing
J. P. Oliveira et al.
MATERIALS & DESIGN (2020)
Hot isostatic pressing in metal additive manufacturing: X-ray tomography reveals details of pore closure
A. du Plessis et al.
ADDITIVE MANUFACTURING (2020)
Fatigue strength assessment of as built AlSi10Mg manufactured by SLM with different build orientations
S. Beretta et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
A review of metal additive manufacturing technologies: Mechanism of defects formation and simulation of melting and solidification phenomena in laser powder bed fusion process
Hideki Kyogoku et al.
MECHANICAL ENGINEERING REVIEWS (2020)
In Situ Additive Manufacturing Process Monitoring With an Acoustic Technique: Clustering Performance Evaluation Using K-Means Algorithm
Hossein Taheri et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Experimental study of the process failure diagnosis in additive manufacturing based on acoustic emission
Haixi Wu et al.
MEASUREMENT (2019)
Scientific, technological and economic issues in metal printing and their solutions
T. DebRoy et al.
NATURE MATERIALS (2019)
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
Anton du Plessis et al.
ADDITIVE MANUFACTURING (2019)
An overview of residual stresses in metal powder bed fusion
Jamison L. Bartlett et al.
ADDITIVE MANUFACTURING (2019)
Systematic approach for determining optimal processing parameters to produce parts with high density in selective laser melting process
Hong-Chuong Tran et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
In Situ Quality Monitoring in AM Using Acoustic Emission: A Reinforcement Learning Approach
K. Wasmer et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Acoustic emission-based characterization of focal position during ultrashort pulse laser ablation
Andreas Kacaras et al.
52ND CIRP CONFERENCE ON MANUFACTURING SYSTEMS (CMS) (2019)
Qualification of Ti6Al4V ELI Alloy Produced by Laser Powder Bed Fusion for Biomedical Applications
I. Yadroitsev et al.
JOM (2018)
Fluid and particle dynamics in laser powder bed fusion
P. Bidare et al.
ACTA MATERIALIA (2018)
Defect detection in selective laser melting technology by acoustic signals with deep belief networks
Dongsen Ye et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
A study on the effect of energy input on spatter particles creation during selective laser melting process
Mohsen Taheri Andani et al.
ADDITIVE MANUFACTURING (2018)
Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring
Q. Y. Lu et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Defects monitoring of laser metal deposition using acoustic emission sensor
Haythem Gaja et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification
Mohsen Seifi et al.
JOM (2017)
Acoustic emission monitoring of crack propagation in additively manufactured and conventional titanium components
Maria Strantza et al.
MECHANICS RESEARCH COMMUNICATIONS (2017)
Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties
Di Wang et al.
MATERIALS & DESIGN (2017)
Applications of non-destructive testing techniques for post-process control of additively manufactured part
Q. Y. Lu et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Feasibility of using acoustic method in monitoring the penetration status during the Pulse Mode Laser Welding process
M. F. M. Yusof et al.
JOINING AND WELDING SYMPOSIUM (2017)
Laser based additive manufacturing in industry and academia
Michael Schmidt et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Mohsen Seifi et al.
JOM (2016)
Effect of hot isostatic pressing procedure on performance of Ti6Al4V: Surface qualities, microstructure and mechanical properties
Chao Cai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Spatially resolved acoustic spectroscopy for selective laser melting
Richard J. Smith et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
Directionality of Cavities and Porosity Formation in Powder-Bed Laser Additive Manufacturing of Metal Components Investigated Using X-Ray Tomography
Anton du Plessis et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2016)
In-process sensing in selective laser melting (SLM) additive manufacturing
Thomas G. Spears et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2016)
PECULIARITIES OF SINGLE TRACK FORMATION FROM TI6AL4V ALLOY AT DIFFERENT LASER POWER DENSITIES BY SELECTIVE LASER MELTING
I. Yadroitsava et al.
SOUTH AFRICAN JOURNAL OF INDUSTRIAL ENGINEERING (2015)
PECULIARITIES OF SINGLE TRACK FORMATION FROM TI6AL4V ALLOY AT DIFFERENT LASER POWER DENSITIES BY SELECTIVE LASER MELTING
I. Yadroitsava et al.
SOUTH AFRICAN JOURNAL OF INDUSTRIAL ENGINEERING (2015)
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Gustavo Tapia et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Effect of focus position on informational properties of acoustic emission generated by laser-material interactions
Evgueni V. Bordatchev et al.
APPLIED SURFACE SCIENCE (2006)
Detection technique for transition between deep penetration mode and shallow penetration mode in CO2 laser welding of metals
S Nakamura et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2000)
Share Paper
