Related references
Note: Only part of the references are listed.Application of nanoporous cobalt-based ZIF-67 metal-organic framework (MOF) for construction of an epoxy-composite coating with superior anti-corrosion properties
Seyed Mohammad Lashgari et al.
CORROSION SCIENCE (2021)
Machine learning-driven optimization in powder manufacturing of Ni-Co based superalloy
Ryo Tamura et al.
MATERIALS & DESIGN (2021)
A crystal plasticity finite element model embedding strain-rate sensitivities inherent to deformation mechanisms: Application to alloy AZ31
William G. Feather et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Overview of mechanical, microstructural, oxidation properties and high-temperature applications of superalloys
I. G. Akande et al.
MATERIALS TODAY-PROCEEDINGS (2021)
A multi-GPU implementation of a full-field crystal plasticity solver for efficient modeling of high-resolution microstructures
Adnan Eghtesad et al.
COMPUTER PHYSICS COMMUNICATIONS (2020)
Modeling of the thermo-mechanical response and texture evolution of WE43 Mg alloy in the dynamic recrystallization regime using a viscoplastic self-consistent formulation
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
High-performance full-field crystal plasticity with dislocation-based hardening and slip system back-stress laws: Application to modeling deformation of dual-phase steels
Adnan Eghtesad et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Predicting deformation behavior of α-uranium during tension, compression, load reversal, rolling, and sheet forming using elasto-plastic, multi-level crystal plasticity coupled with finite elements
Timothy J. Barrett et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Characterization of plastic deformation induced by machining in a Ni-based superalloy
Rengen Ding et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure Evolution of Multicomponent γ′-Strengthened Co-Based Superalloy at 750 °C and 1000 °C with Different Al and Ti Contents
Yi Zhang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Additive manufacturing for repairing: from damage identification and modeling to DLD
Matteo Perini et al.
RAPID PROTOTYPING JOURNAL (2020)
Effects of heat treatment and build orientation on the evolution of ε and α′ martensite and strength during compressive loading of additively manufactured 304L stainless steel
Nicholas C. Ferreri et al.
ACTA MATERIALIA (2020)
Microstructure characteristics and mechanical behaviour of a selective laser melted Inconel 718 alloy
Liang Huang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effects of laser power on geometry, microstructure and mechanical properties of printed Ti-6Al-4V parts
F. R. Kaschel et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Determining volume fractions of γ, γ′, γ, δ, and MC-carbide phases in Inconel 718 as a function of its processing history using an advanced neutron diffraction procedure
Nicholas C. Ferreri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Investigation on the tensile deformation mechanisms in a new Ni-Fe-base superalloy HT700T at 750 °C
P. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Non-acid, alcohol-based electropolishing enables high-quality electron backscatter diffraction characterization of titanium and its alloys: Application to pure Ti and Ti-6Al-4V
Nicholas C. Ferreri et al.
MATERIALS CHARACTERIZATION (2020)
Evolution of grain structure, γ′ precipitate and hardness in friction welding and post weld heat treatment of a new Ni-Fe based superalloy
Yaxin Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Investigation on microstructure and mechanical properties of a vacuum brazed joint of γ′-strengthened Co-based single crystal superalloy before and after the post-bond heat treatment
S. Y. Wang et al.
VACUUM (2020)
Predicting elastic anisotropy of dual-phase steels based on crystal mechanics and microstructure
Aaron M. Cantara et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Structural representation of additively manufactured 316L austenitic stainless steel
C. A. Bronkhorst et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures
Sean Gribbin et al.
MATERIALS CHARACTERIZATION (2019)
Deep drawing simulations using the finite element method embedding a multi-level crystal plasticity constitutive law: Experimental verification and sensitivity analysis
Timothy J. Barrett et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Mechanical response, twinning, and texture evolution of WE43 magnesium-rare earth alloy as a function of strain rate: Experiments and multi-level crystal plasticity modeling
William G. Feather et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Effects of build orientation and heat treatment on the evolution of microstructure and mechanical properties of alloy Mar-M-509 fabricated via laser powder bed fusion
Nicholas C. Ferreri et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
An implicit formulation of the elasto-plastic self-consistent polycrystal plasticity model and its implementation in implicit finite elements
Milovan Zecevic et al.
MECHANICS OF MATERIALS (2019)
High temperature oxidation and erosion of candidate materials for particle receivers of concentrated solar power tower systems
T. Galiullin et al.
SOLAR ENERGY (2019)
The crystal growth, intercellular spacing and microsegregation of selective laser melted Inconel 718 superalloy
Pan Tao et al.
VACUUM (2019)
Modelling recrystallization textures driven by intragranular fluctuations implemented in the viscoplastic self-consistent formulation
Miroslav Zecevic et al.
ACTA MATERIALIA (2019)
A generalized spherical harmonics-based procedure for the interpolation of partial datasets of orientation distributions to enable crystal mechanics-based simulations
Timothy J. Barrett et al.
MATERIALIA (2019)
Compact reconstruction of orientation distributions using generalized spherical harmonics to advance large-scale crystal plasticity modeling: Verification using cubic, hexagonal, and orthorhombic polycrystals
Adnan Eghtesad et al.
ACTA MATERIALIA (2018)
Graphics processing unit accelerated phase field dislocation dynamics: Application to bi-metallic interfaces
Adnan Eghtesad et al.
ADVANCES IN ENGINEERING SOFTWARE (2018)
An automated procedure for geometry creation and finite element mesh generation: Application to explicit grain structure models and machining distortion
Timothy J. Barrett et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718
A. Cruzado et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Modeling of intragranular misorientation and grain fragmentation in polycrystalline materials using the viscoplastic self-consistent formulation
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Activity of pyramidal I and II <c plus a> slip in Mg alloys as revealed by texture development
Miroslav Zecevic et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Explicit modeling of double twinning in AZ31 using crystal plasticity finite elements for predicting the mechanical fields for twin variant selection and fracture analyses
Milan Ardeljan et al.
ACTA MATERIALIA (2018)
OpenMP and MPI implementations of an elasto-viscoplastic fast Fourier transform-based micromechanical solver for fast crystal plasticity modeling
Adnan Eghtesad et al.
ADVANCES IN ENGINEERING SOFTWARE (2018)
Spectral database constitutive representation within a spectral micromechanical solver for computationally efficient polycrystal plasticity modelling
Adnan Eghtesad et al.
COMPUTATIONAL MECHANICS (2018)
Properties of newly developed Co-based brazing fillers
T. Uhlig et al.
WELDING IN THE WORLD (2017)
A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Effect of dislocation density-twin interactions on twin growth in AZ31 as revealed by explicit crystal plasticity finite element modeling
Milan Ardeljan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Coupling elasto-plastic self-consistent crystal plasticity and implicit finite elements: Applications to compression, cyclic tension-compression, and bending to large strains
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Modeling cyclic deformation of inconel 718 superalloy by means of crystal plasticity and computational homogenization
A. Cruzado et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Coupled texture and non-Schmid effects on yield surfaces of body-centered cubic polycrystals predicted by a crystal plasticity finite element approach
Daniel J. Savage et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Modeling of Sheet Metal Forming Based on Implicit Embedding of the Elasto-Plastic Self-Consistent Formulation in Shell Elements: Application to Cup Drawing of AA6022-T4
Milovan Zecevic et al.
JOM (2017)
Crystal Plasticity Modeling of Microstructure Evolution and Mechanical Fields During Processing of Metals Using Spectral Databases
Marko Knezevic et al.
JOM (2017)
Grain growth during selective laser melting of a Co-Cr-Mo alloy
Z. W. Chen et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Thermo hydrogen treatment for microstructure refinement and mechanical properties improvement of Ti-6Al-4V alloy
Yanxu Zong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and phase transformation on the surface of Inconel 718 alloys fabricated by SLM under 1050°C solid solution plus double ageing
Ke-yun Feng et al.
VACUUM (2017)
The plasticity of highly oriented nano-layered Zr/Nb composites
Milan Ardeljan et al.
ACTA MATERIALIA (2016)
A numerical procedure enabling accurate descriptions of strain rate-sensitive flow of polycrystals within crystal visco-plasticity theory
Marko Knezevic et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy
Milan Ardeljan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Numerical implementation of non-local polycrystal plasticity using fast Fourier transforms
Ricardo A. Lebensohn et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Dual-phase steel sheets under cyclic tension-compression to large strains: Experiments and crystal plasticity modeling
Milovan Zecevic et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting
Michael Cloots et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Modeling discrete twin lamellae in a microstructural framework
Marko Knezevic et al.
SCRIPTA MATERIALIA (2016)
Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr
Marko Knezevic et al.
ACTA MATERIALIA (2015)
Explicit incorporation of deformation twins into crystal plasticity finite element models
Milan Ardeljan et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)
Spectral database solutions to elasto-viscoplasticity within finite elements: Application to a cobalt-based FCC superalloy
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Mechanical behavior of Mg subjected to strain path changes: Experiments and modeling
W. Wen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Progress in Additive Manufacturing
Edward D. Herderick
JOM (2015)
An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals
Milovan Zecevic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
A new implementation of the spectral crystal plasticity framework in implicit finite elements
Miroslav Zecevic et al.
MECHANICS OF MATERIALS (2015)
Deformation behavior of the cobalt-based superalloy Haynes 25: Experimental characterization and crystal plasticity modeling
Marko Knezevic et al.
ACTA MATERIALIA (2014)
Material-based design of the extrusion of bimetallic tubes
Marko Knezevic et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
A high-performance computational framework for fast crystal plasticity simulations
Marko Knezevic et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models
Marko Knezevic et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites
Milan Ardeljan et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
DREAM. 3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
Michael A. Groeber et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2014)
An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys
Shakeel Safdar et al.
APPLIED MATHEMATICAL MODELLING (2013)
A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels
K. Kitayama et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Predicting the Coupling Properties of Axially-Textured Materials
Luis E. Fuentes-Cobas et al.
MATERIALS (2013)
An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials
Ricardo A. Lebensohn et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels
Ji Hoon Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Deformation twinning in AZ31: Influence on strain hardening and texture evolution
Marko Knezevic et al.
ACTA MATERIALIA (2010)
Crystal plasticity simulations using discrete Fourier transforms
Marko Knezevic et al.
ACTA MATERIALIA (2009)
Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications
L. E. Murr et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2009)
Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
A dislocation-based constitutive law for pure Zr including temperature effects
I. J. Beyerlein et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Fast computation of first-order elastic-plastic closures for polycrystalline cubic-orthorhombic microstructures
Marko Knezevic et al.
COMPUTATIONAL MATERIALS SCIENCE (2007)
Self-consistent modelling of the mechanical behaviour of viscoplastic polycrystals incorporating intragranular field fluctuations
R. A. Lebensohn et al.
PHILOSOPHICAL MAGAZINE (2007)
A comparison of dislocation induced back stress formulations in strain gradient crystal plasticity
C. J. Bayley et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Rapid manufacturing of metal components by laser forming
Edson Costa Santos et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Spectral calibration of crystal plasticity models
SR Kalidindi et al.
ACTA MATERIALIA (2006)
Physical analyses of crystal plasticity by DD simulations
B Devincre et al.
SCRIPTA MATERIALIA (2006)
Non-local crystal plasticity model with intrinsic SSD and GND effects
LP Evers et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2004)
The role of collinear interaction in dislocation-induced hardening
R Madec et al.
SCIENCE (2003)
A computational scheme for linear and non-linear composites with arbitrary phase contrast
JC Michel et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2001)