Related references
Note: Only part of the references are listed.In situ bioprinting - Bioprinting from benchside to bedside?
Satnam Singh et al.
ACTA BIOMATERIALIA (2020)
Calcium phosphate-PLA scaffolds fabricated by fused deposition modeling technique for bone tissue applications: Fabrication, characterization and simulation
S. Sahmani et al.
CERAMICS INTERNATIONAL (2020)
The printability of three water based polymeric binders and their effects on the properties of 3D printed hydroxyapatite bone scaffold
Weihong Chai et al.
CERAMICS INTERNATIONAL (2020)
Hydrogel-based 3D bioprinting: A comprehensive review on cell-laden hydrogels, bioink formulations, and future perspectives
Janitha M. Unagolla et al.
APPLIED MATERIALS TODAY (2020)
Four-dimensional bioprinting: Current developments and applications in bone tissue engineering
Zhuqing Wan et al.
ACTA BIOMATERIALIA (2020)
Intraoperative Bioprinting: Repairing Tissues and Organs in a Surgical Setting
Yang Wu et al.
TRENDS IN BIOTECHNOLOGY (2020)
3D printing of acellular scaffolds for bone defect regeneration: A review
Farnaz Ghorbani et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Additive manufacturing for bone tissue engineering scaffolds
Huawei Qu
MATERIALS TODAY COMMUNICATIONS (2020)
Engineered dual-scale poly (ε-caprolactone) scaffolds using 3D printing and rotational electrospinning for bone tissue regeneration
Boyang Huang et al.
ADDITIVE MANUFACTURING (2020)
Endothelial cells support osteogenesis in an in vitro vascularized bone model developed by 3D bioprinting
Irene Chiesa et al.
BIOFABRICATION (2020)
Fabrication and properties of poly(vinyl alcohol)/β-tricalcium phosphate composite scaffolds via fused deposition modeling for bone tissue engineering
Gang Chen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Cell-Free Demineralized Bone Matrix for Mesenchymal Stem Cells Survival and Colonization
Monica Mattioli-Belmonte et al.
MATERIALS (2019)
Ultrasonic mixing chamber as an effective tool for the biofabrication of fully graded scaffolds for interface tissue engineering
Irene Chiesa et al.
INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS (2019)
Three-dimensional (3D) printed scaffold and material selection for bone repair
Lei Zhang et al.
ACTA BIOMATERIALIA (2019)
In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering
Sven H. Diermann et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2019)
Effective bioprinting resolution in tissue model fabrication
Amir K. Miri et al.
LAB ON A CHIP (2019)
Applications of decellularized extracellular matrix in bone and cartilage tissue engineering
Yu Seon Kim et al.
BIOENGINEERING & TRANSLATIONAL MEDICINE (2019)
A Bioprinted In Vitro Model for Osteoblast to Osteocyte Transformation by Changing Mechanical Properties of the ECM
Bryan E. J. Lee et al.
ADVANCED BIOSYSTEMS (2019)
Characterization of printed PLA scaffolds for bone tissue engineering
Agathe Gremare et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Enhanced In Vivo Bone and Blood Vessel Formation by Iron Oxide and Silica Doped 3D Printed Tricalcium Phosphate Scaffolds
Susmita Bose et al.
ANNALS OF BIOMEDICAL ENGINEERING (2018)
Bone regeneration strategies: Engineered scaffolds, bioactive molecules and stem cells current stage and future perspectives
Antalya Ho-Shui-Ling et al.
BIOMATERIALS (2018)
Bone remodelling in vitro: Where are we headed? -A review on the current understanding of physiological bone remodelling and inflammation and the strategies for testing biomaterials in vitro
Nupur Kohli et al.
BONE (2018)
Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants
Changjun Han et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Handheld skin printer: in situ formation of planar biomaterials and tissues
Navid Hakimi et al.
LAB ON A CHIP (2018)
Biofabrication: A Guide to Technology and Terminology
Lorenzo Moroni et al.
TRENDS IN BIOTECHNOLOGY (2018)
In Vivo Evaluation of 3D-Printed Polycaprolactone Scaffold Implantation Combined with -TCP Powder for Alveolar Bone Augmentation in a Beagle Defect Model
Su A. Park et al.
MATERIALS (2018)
Engineering in-vitro stem cell-based vascularized bone models for drug screening and predictive toxicology
Alessandro Pirosa et al.
STEM CELL RESEARCH & THERAPY (2018)
Current state of fabrication technologies and materials for bone tissue engineering
Abiy Wubneh et al.
ACTA BIOMATERIALIA (2018)
3D-printed beta-TCP bone tissue engineering scaffolds: Effects of chemistry on in vivo biological properties in a rabbit tibia model
Samit Kumar Nandi et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Optimization of the configuration of porous bone scaffolds made of Polyamide/Hydroxyapatite composites using Selective Laser Sintering for tissue engineering applications
M. Ramu et al.
BIO-MEDICAL MATERIALS AND ENGINEERING (2018)
Layer by Layer: 3D Bioprinting on the Rise
Chris Palmer
Genetic Engineering & Biotechnology News (2018)
Regulating 3D-printed medical products
Laura M. Ricles et al.
SCIENCE TRANSLATIONAL MEDICINE (2018)
3D Powder Printed Bioglass and β-Tricalcium Phosphate Bone Scaffolds
Michael Seidenstuecker et al.
MATERIALS (2018)
Fabrication of scaffolds in tissue engineering: A review
Peng Zhao et al.
FRONTIERS OF MECHANICAL ENGINEERING (2018)
In vitro Models of Bone Remodelling and Associated Disorders
Robert Owen et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2018)
Pressure-activated microsyringe (PAM) fabrication of bioactive glass-poly(lactic-co-glycolic acid) composite scaffolds for bone tissue regeneration
M. Mattioli-Belmonte et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
3D Printing of Tissue Engineered Constructs for In Vitro Modeling of Disease Progression and Drug Screening
Joseph Vanderburgh et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
PCL/PHBV blended three dimensional scaffolds fabricated by fused deposition modeling and responses of chondrocytes to the scaffolds
Wasana Kosorn et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2017)
Decellularized bone extracellular matrix and human dental pulp stem cells as a construct for bone regeneration
Francesco Paduano et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2017)
Scaffolds for Bone Tissue Engineering: State of the art and new perspectives
Livia Roseti et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Multimaterial, heterogeneous, and multicellular three-dimensional bioprinting
Carmelo De Maria et al.
MRS BULLETIN (2017)
Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction
Maria A. Surmeneva et al.
MATERIALS & DESIGN (2017)
A review of 4D printing
Farhang Momeni et al.
MATERIALS & DESIGN (2017)
3D printed scaffolds of calcium silicate-doped β-TCP synergize with co-cultured endothelial and stromal cells to promote vascularization and bone formation
Yuan Deng et al.
SCIENTIFIC REPORTS (2017)
Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review
Xiang-Yu Zhang et al.
MATERIALS (2017)
Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion
Swee Leong Sing et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2017)
Selective laser sintering scaffold with hierarchical architecture and gradient composition for osteochondral repair in rabbits
Yingying Du et al.
BIOMATERIALS (2017)
A bioprintable form of chitosan hydrogel for bone tissue engineering
Tugrul Tolga Demirtas et al.
BIOFABRICATION (2017)
Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2016)
Current advances and future perspectives in extrusion-based bioprinting
Ibrahim T. Ozbolat et al.
BIOMATERIALS (2016)
Powder-based 3D printing for bone tissue engineering
G. Brunello et al.
BIOTECHNOLOGY ADVANCES (2016)
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
F. S. Senatov et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Multilayer scaffolds in orthopaedic tissue engineering
Kivanc Atesok et al.
KNEE SURGERY SPORTS TRAUMATOLOGY ARTHROSCOPY (2016)
In Vitro Bone Cell Models: Impact of Fluid Shear Stress on Bone Formation
Claudia Wittkowske et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2016)
Engineered In Vitro Disease Models
Kambez H. Benam et al.
ANNUAL REVIEW OF PATHOLOGY: MECHANISMS OF DISEASE, VOL 10 (2015)
Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging
Guifang Gao et al.
BIOTECHNOLOGY JOURNAL (2015)
The rational use of animal models in the evaluation of novel bone regenerative therapies
Mihaela Peric et al.
BONE (2015)
Manufacturing of advanced biodegradable polymeric components
Roberto Pantani et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting
Chunze Yan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Selective laser sintering manufacturing of polycaprolactone bone scaffolds for applications in bone tissue engineering
Alida Mazzoli et al.
RAPID PROTOTYPING JOURNAL (2015)
In Vitro Three-Dimensional Bone Tissue Models: From Cells to Controlled and Dynamic Environment
Guenaelle Bouet et al.
TISSUE ENGINEERING PART B-REVIEWS (2015)
Bone tissue regeneration: the role of scaffold geometry
Amir A. Zadpoor
BIOMATERIALS SCIENCE (2015)
Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging
Guifang Gao et al.
BIOTECHNOLOGY JOURNAL (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
A novel bioprinting method and system for forming hybrid tissue engineering constructs
Y. Shanjani et al.
BIOFABRICATION (2015)
The Osteoprint: A bioinspired two-photon polymerized 3-D structure for the enhancement of bone-like cell differentiation
Attilio Marino et al.
ACTA BIOMATERIALIA (2014)
Three-dimensional printing of strontium-containing mesoporous bioactive glass scaffolds for bone regeneration
Jianhua Zhang et al.
ACTA BIOMATERIALIA (2014)
Development and characterization of UV curable epoxy/hydroxyapatite suspensions for stereolithography applied to bone tissue engineering
Francesca Scalera et al.
CERAMICS INTERNATIONAL (2014)
Application of composites to orthopedic prostheses for effective bone healing: A review
Hassan Mehboob et al.
COMPOSITE STRUCTURES (2014)
Bioprinting technology and its applications
Young-Joon Seol et al.
EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Printability of calcium phosphate: Calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique
Zuoxin Zhou et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects
Miguel Castilho et al.
BIOFABRICATION (2014)
Hydrogels derived from demineralized and decellularized bone extracellular matrix
M. J. Sawkins et al.
ACTA BIOMATERIALIA (2013)
Bone scaffolds with homogeneous and discrete gradient mechanical properties
C. Jelen et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
Fabrication of porous polyvinyl alcohol scaffold for bone tissue engineering via selective laser sintering
Cijun Shuai et al.
BIOFABRICATION (2013)
Cell Origami: Self-Folding of Three-Dimensional Cell-Laden Microstructures Driven by Cell Traction Force
Kaori Kuribayashi-Shigetomi et al.
PLOS ONE (2012)
In vitro-Osteoclastic Activity Studies on Surfaces of 3D Printed Calcium Phosphate Scaffolds
Rainer Detsch et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2011)
Human microvasculature fabrication using thermal inkjet printing technology
Xiaofeng Cui et al.
BIOMATERIALS (2009)
Normal Bone Anatomy and Physiology
Bart Clarke
CLINICAL JOURNAL OF THE AMERICAN SOCIETY OF NEPHROLOGY (2008)
Effects of dispensing pressure and nozzle diameter on cell survival from solid freeform fabrication-based direct cell writing
Robert Chang et al.
TISSUE ENGINEERING PART A (2008)
Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: Three-dimensional micro-CT based structural analyses of porous bioactive titanium implants
Bungo Otsuki et al.
BIOMATERIALS (2006)
Bone graft substitutes
Cato Laurencin et al.
EXPERT REVIEW OF MEDICAL DEVICES (2006)
The osteocyte
MLK Tate et al.
INTERNATIONAL JOURNAL OF BIOCHEMISTRY & CELL BIOLOGY (2004)
Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs
KF Leong et al.
BIOMATERIALS (2003)
Biomaterial developments for bone tissue engineering
KJL Burg et al.
BIOMATERIALS (2000)