4.6 Article

Challenges in tin perovskite solar cells

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Field-Effect Transistors Based on Formamidinium Tin Triiodide Perovskite

Shuyan Shao et al.

Summary: This study reports the first top-gate bottom-contact FET using formamidinium tin triiodide perovskite films as a semiconducting channel, achieving high hole mobility, I-ON/OFF ratio, and relatively small threshold voltage. By adding a small amount of 2D material in the 3D tin perovskite, the researchers successfully reduced the doping level of the active layer, leading to enhanced transistor parameters even after 20 months of storage in a N-2 atmosphere.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

High External Photoluminescence Quantum Yield in Tin Halide Perovskite Thin Films

Isabella Poli et al.

Summary: The study demonstrates that pristine thin films made of tin halide perovskite exhibit external photoluminescence quantum yield comparable to that of lead halide perovskite, the material commonly used in state-of-the-art perovskite solar cells.

ACS ENERGY LETTERS (2021)

Review Chemistry, Physical

Encapsulation of perovskite solar cells for enhanced stability: Structures, materials and characterization

Jiale Li et al.

Summary: Perovskite solar cells have achieved a certified efficiency of 25.5% within a decade, but the long-term device stability remains a significant challenge. Encapsulation technique is employed to enhance stability under ambient conditions, and modifications are needed due to the unique properties of PSCs. This review covers optimizing architecture, materials, and manufacturing process for PSCs encapsulation, demonstrating significant improvements in stability and proposing suggestions for future commercialization.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Solvents for Processing Stable Tin Halide Perovskites

Diego Di Girolamo et al.

Summary: Tin-based perovskites face stability issues due to oxidation of Sn(II) to Sn(IV), with dimethyl sulfoxide identified as a primary source of tin oxidation. By analyzing over 2000 solvents, a series of 12 new solvents suitable for processing FASnI3 were identified, leading to the production of solar cells outperforming those based on DMSO. This work provides guidance for further research on identifying new solvents for preparing stable tin-based perovskites.

ACS ENERGY LETTERS (2021)

Review Chemistry, Physical

Lead-free tin perovskite solar cells

Tianhao Wu et al.

Summary: Efficient and stable development of lead-free perovskite solar cells (PSCs) using tin as a promising candidate for high-performance, eco-friendly photovoltaic technology has been reviewed. Approaches toward efficiency improvement and challenges in reaching higher PCE and scalable production for tin PSCs have been discussed in this paper with the goal of accelerating their commercialization.

JOULE (2021)

Article Chemistry, Multidisciplinary

One-Step Synthesis of SnI2•(DMSO)x Adducts for High-Performance Tin Perovskite Solar Cells

Xianyuan Jiang et al.

Summary: This study improved the electron diffusion length and structural homogeneity of tin halide perovskite materials using a synthetic route, resulting in solar cells with a power conversion efficiency of 14.6%.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Review Chemistry, Physical

Architecture of p-i-n Sn-Based Perovskite Solar Cells: Characteristics, Advances, and Perspectives

Nan Sun et al.

Summary: Sn-based perovskites have been extensively researched as promising alternatives to Pb counterparts in the field of photovoltaics. The rational design of device architecture is crucial for high-performing perovskite solar cells, and architecture engineering has significantly contributed to the development of Sn-based PSCs. This review summarizes the advanced development of Sn-based PSCs, focusing on architecture engineering and providing guidance for future efficient and stable Sn-based PSCs.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

Fundamentals of tin iodide perovskites: a promising route to highly efficient, lead-free solar cells

A. Filippetti et al.

Summary: Hybrid tin-iodide perovskites are studied as a lead-free replacement for lead-iodide perovskites, and theoretical analysis reveals that they exhibit comparable or even superior photoconversion efficiency when compared to lead perovskites, especially in thick-layer limit. This is attributed to the smaller absorption cross section and smaller band gap of tin-based materials, which are very close to the ideal Shockley-Queisser limit. The rate of photoluminescence emission is found to be extremely sensitive to the absorption spectral weight at the band extrema, with different B-factors observed for different tin-based perovskites. Additionally, the impact of Urbach energy and hole doping on the properties of these materials is described in detail.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Rational strategies toward efficient and stable lead-free tin halide perovskite solar cells

Dongxu He et al.

Summary: Despite the steady progress in efficiency, tin halide perovskite solar cells still lag behind lead halide perovskite solar cells in terms of efficiency and environmental stability. Various strategies, including composition and dimension tuning, additive engineering, and device engineering, have been proposed to address these issues.

MATERIALS CHEMISTRY FRONTIERS (2021)

Article Chemistry, Multidisciplinary

Modulation of perovskite crystallization processes towards highly efficient and stable perovskite solar cells with MXene quantum dot-modified SnO2

Yingguo Yang et al.

Summary: The study explores the modulation of perovskite crystallization kinetics by nanocrystalline SnO2 layers, showing that MQDs-SnO2 layer can rapidly induce perovskite nucleation and improve the crystal quality and phase stability. With superior charge extraction properties, the corresponding PSCs achieved up to 23.3% steady-state power conversion efficiency and outstanding stability against humidity and light soaking.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Materials Science, Multidisciplinary

Illumination Durability and High-Efficiency Sn-Based Perovskite Solar Cell under Coordinated Control of Phenylhydrazine and Halogen Ions

Chengbo Wang et al.

Summary: The illumination stability and efficiency of Sn-based perovskites have been substantially improved by synergistically introducing phenylhydrazine cation and halogen anions, resulting in a device with a power conversion efficiency of 13.4% and excellent long-term durability. This method offers a universal approach for enhancing the performance of Sn-based perovskites.

MATTER (2021)

Article Materials Science, Multidisciplinary

Tin Halide Perovskites Going Forward: Frost Diagrams Offer Hints

Muhammad Awais et al.

Summary: Tin is considered as a suitable replacement for toxic lead in conventional perovskite solar cells, but due to its different chemical properties, tin-based PSCs are not efficient. Recent findings suggest that tin-based perovskites can oxidize even in the absence of oxygen, highlighting unconventional pathways for oxidation.

ACS MATERIALS LETTERS (2021)

Article Nanoscience & Nanotechnology

Impact of SnF2 Addition on the Chemical and Electronic Surface Structure of CsSnBr3

Claudia Hartmann et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

Stability of Lead and Tin Halide Perovskites: The Link between Defects and Degradation

Luis Lanzetta et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Article Multidisciplinary Sciences

U1 snRNP regulates cancer cell migration and invasion in vitro

Jung-Min Oh et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Multidisciplinary

Mechanism of Crystal Formation in Ruddlesden-Popper Sn-Based Perovskites

Jingjin Dong et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Chemistry, Multidisciplinary

Reducing Agents for Improving the Stability of Sn-based Perovskite Solar Cells

Tianyue Wang et al.

CHEMISTRY-AN ASIAN JOURNAL (2020)

Article Chemistry, Physical

Tin versus Lead Redox Chemistry Modulates Charge Trapping and Self-Doping in Tin/Lead Iodide Perovskites

Daniele Meggiolaro et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Article Chemistry, Physical

Conventional Solvent Oxidizes Sn(II) in Perovskite Inks

Makhsud I. Saidaminov et al.

ACS ENERGY LETTERS (2020)

Article Chemistry, Multidisciplinary

Self-Repairing Tin-Based Perovskite Solar Cells with a Breakthrough Efficiency Over 11%

Chengbo Wang et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Physical

Lead-free tin-halide perovskite solar cells with 13% efficiency

Kohei Nishimura et al.

NANO ENERGY (2020)

Article Chemistry, Physical

Instability of Tin Iodide Perovskites: Bulk p-Doping versus Surface Tin Oxidation

Damiano Ricciarelli et al.

ACS ENERGY LETTERS (2020)

Article Chemistry, Physical

Perovskite Crystallization Dynamics during Spin-Casting: An In Situ Wide-Angle X-ray Scattering Study

Noura Alhazmi et al.

ACS APPLIED ENERGY MATERIALS (2020)

Review Chemistry, Physical

Crystallization Kinetics in 2D Perovskite Solar Cells

Youkui Xu et al.

ADVANCED ENERGY MATERIALS (2020)

Article Engineering, Electrical & Electronic

Materials Chemistry Approach for Efficient Lead-Free Tin Halide Perovskite Solar Cells

Tomoya Nakamura et al.

ACS APPLIED ELECTRONIC MATERIALS (2020)

Review Chemistry, Physical

Recent progress in morphology optimization in perovskite solar cell

Naveen Kumar Tailor et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Multidisciplinary

Templated growth of FASnI3 crystals for efficient tin perovskite solar cells

Xiao Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Materials Science, Multidisciplinary

Origin of Sn(ii) oxidation in tin halide perovskites

Jorge Pascual et al.

MATERIALS ADVANCES (2020)

Article Chemistry, Physical

Advanced hermetic encapsulation of perovskite solar cells: the route to commercialization

Seyedali Emami et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Chemistry, Multidisciplinary

Halide Perovskite Photovoltaics: Background, Status, and Future Prospects

Ajay Kumar Jena et al.

CHEMICAL REVIEWS (2019)

Editorial Material Chemistry, Physical

The Bloom of Perovskite Optoelectronics: Fundamental Science Matters

Jue Gong et al.

ACS ENERGY LETTERS (2019)

Review Chemistry, Multidisciplinary

Mixed Dimensional 2D/3D Hybrid Perovskite Absorbers: The Future of Perovskite Solar Cells?

Anurag Krishna et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Robust Tin-Based Perovskite Solar Cells with Hybrid Organic Cations to Attain Efficiency Approaching 10%

Efat Jokar et al.

ADVANCED MATERIALS (2019)

Review Chemistry, Multidisciplinary

Two-Dimensional Hybrid Halide Perovskites: Principles and Promises

Lingling Mao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Multidisciplinary Sciences

Double-slit photoelectron interference in strong-field ionization of the neon dimer

Maksim Kunitski et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

Enhanced Hole Transportation for Inverted Tin-Based Perovskite Solar Cells with High Performance and Stability

Cong Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Chemistry, Multidisciplinary

From scalable solution fabrication of perovskite films towards commercialization of solar cells

Fei Huang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Physical

Enhanced performance of tin-based perovskite solar cells induced by an ammonium hypophosphite additive

Jiupeng Cao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Multidisciplinary

Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications

Minsu Jung et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Chemistry, Multidisciplinary

Dopant-Free Tetrakis-Triphenylamine Hole Transporting Material for Efficient Tin-Based Perovskite Solar Cells

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Physical

Highly Reproducible Sn-Based Hybrid Perovskite Solar Cells with 9% Efficiency

Shuyan Shao et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Iodine/DMSO oxidations: a contemporary paradigm in C-N bond chemistry

Aparna Monga et al.

NEW JOURNAL OF CHEMISTRY (2018)

Review Nanoscience & Nanotechnology

Scalable fabrication of perovskite solar cells

Zhen Li et al.

NATURE REVIEWS MATERIALS (2018)

Article Chemistry, Multidisciplinary

Lead-Free Solar Cells based on Tin Halide Perovskite Films with High Coverage and Improved Aggregation

Jiewei Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Editorial Material Multidisciplinary Sciences

Addressing the stability issue of perovskite solar cells for commercial applications

Lei Meng et al.

NATURE COMMUNICATIONS (2018)

Article Energy & Fuels

CsSnI3 Solar Cells via an Evaporation-Assisted Solution Method

Pengchen Zhu et al.

SOLAR RRL (2018)

Article Chemistry, Multidisciplinary

Efficient Lead-Free Solar Cells Based on Hollow {en}MASnI3 Perovskites

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

Highly Oriented Low-Dimensional Tin Halide Perovskites with Enhanced Stability and Photovoltaic Performance

Yuqin Liao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

Mixed-Organic-Cation Tin Iodide for Lead-Free Perovskite Solar Cells with an Efficiency of 8.12%

Ziran Zhao et al.

ADVANCED SCIENCE (2017)

Article Chemistry, Physical

Mechanism of Tin Oxidation and Stabilization by Lead Substitution in Tin Halide Perovskites

Tomas Leijtens et al.

ACS ENERGY LETTERS (2017)

Editorial Material Energy & Fuels

PEROVSKITE SOLAR CELLS Stability lies at interfaces

Monica Lira-Cantu

NATURE ENERGY (2017)

Editorial Material Energy & Fuels

On top of commercial photovoltaics

Steve Albrecht et al.

NATURE ENERGY (2017)

Review Nanoscience & Nanotechnology

Chemically diverse and multifunctional hybrid organic-inorganic perovskites

Wei Li et al.

NATURE REVIEWS MATERIALS (2017)

Article Chemistry, Physical

Perovskite Solar Cells Go Lead Free

Antonio Abate

JOULE (2017)

Article Chemistry, Multidisciplinary

Solvent-Coordinated Tin Halide Complexes as Purified Precursors for Tin-Based Perovskites

Masashi Ozaki et al.

ACS OMEGA (2017)

Article Chemistry, Multidisciplinary

Fabrication of Efficient Formamidinium Tin Iodide Perovskite Solar Cells through SnF2-Pyrazine Complex

Seon Joo Lee et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Physical

Heterojunction-Depleted Lead-Free Perovskite Solar Cells with Coarse-Grained B-γ-CsSnI3 Thin Films

Ning Wang et al.

ADVANCED ENERGY MATERIALS (2016)

Article Chemistry, Physical

Toward Lead-Free Perovskite Solar Cells

Feliciano Giustino et al.

ACS ENERGY LETTERS (2016)

Article Chemistry, Physical

Formamidinium tin-based perovskite with low E-g for photovoltaic applications

Teck Ming Koh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Chemistry, Multidisciplinary

Lead-Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation

Mulmudi Hemant Kumar et al.

ADVANCED MATERIALS (2014)

Article Chemistry, Multidisciplinary

Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance

Wan-Jian Yin et al.

ADVANCED MATERIALS (2014)

Article Chemistry, Multidisciplinary

Lead-free organic-inorganic tin halide perovskites for photovoltaic applications

Nakita K. Noel et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Nanoscience & Nanotechnology

Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells

Jeong-Hyeok Im et al.

NATURE NANOTECHNOLOGY (2014)

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

Article Multidisciplinary Sciences

Thermal Assisted Oxygen Annealing for High Efficiency Planar CH3NH3PbI3 Perovskite Solar Cells

Zhiwei Ren et al.

SCIENTIFIC REPORTS (2014)

Article Materials Science, Multidisciplinary

Electronic band structure, phonons, and exciton binding energies of halide perovskites CsSnCl3, CsSnBr3, and CsSnI3

Ling-yi Huang et al.

PHYSICAL REVIEW B (2013)

Article Physics, Applied

Schottky solar cells based on CsSnI3 thin-films

Zhuo Chen et al.

APPLIED PHYSICS LETTERS (2012)

Article Multidisciplinary Sciences

All-solid-state dye-sensitized solar cells with high efficiency

In Chung et al.

NATURE (2012)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Article Chemistry, Inorganic & Nuclear

Templating and structural engineering in organic-inorganic perovskites

DB Mitzi

JOURNAL OF THE CHEMICAL SOCIETY-DALTON TRANSACTIONS (2001)