4.6 Article

Design of Robust Fault-Tolerant Control for Target Tracking System With Input Delay and Sensor Fault

Related references

Note: Only part of the references are listed.
Article Automation & Control Systems

Robust predictive visual servoing control for an inertially stabilized platform with uncertain kinematics

Xiangyang Liu et al.

Summary: This paper presents a disturbance observer (DOB) based predictive control approach for image-based visual servoing of an inertially stabilized platform (ISP). By constructing a depth-independent kinematic matrix and designing a discrete-time DOB to address challenges caused by unknown factors such as feature depth, promising qualities of the proposed approach are validated through experiments.

ISA TRANSACTIONS (2021)

Article Engineering, Marine

A Nonlinear Backstepping Controller Design for High-Precision Tracking Applications with Input-Delay Gimbal Systems

Hwan-Cheol Park et al.

Summary: This paper presents a novel nonlinear control approach for achieving accurate real-time tracking performance in maritime surveillance applications for a two-axis gimbal. The proposed nonlinear backstepping controller is designed to enhance tracking performance and system stability, with an additional backstep to minimize control errors due to delay time. Simulation and experimental studies validate the improvements in tracking performance and system bandwidth compared to a previous super-twisting sliding mode controller.

JOURNAL OF MARINE SCIENCE AND ENGINEERING (2021)

Article Engineering, Mechanical

A Study on Vision-Based Backstepping Control for a Target Tracking System

Thinh Huynh et al.

Summary: This paper proposes a new method for controlling the pose of a camera mounted on a two-axis gimbal system for visual servoing applications, achieving better control performances by decoupling the couplings in both mechanism's kinematics and imaging geometry simultaneously. Simulation and experimental studies validate the efficiency of the proposed control system, which requires fewer measurements and results in smoother transient responses compared to other common control methods.

ACTUATORS (2021)

Article Computer Science, Information Systems

Actuator Fault-Tolerant Control for an Electro-Hydraulic Actuator Using Time Delay Estimation and Feedback Linearization

Van Du Phan et al.

Summary: This study proposes a novel fault-tolerant controller for a double-rod electro-hydraulic actuator to address motion control challenges in the presence of system disturbances and internal leakage faults. By transforming the nonlinear system to a linear system and utilizing time delay estimation technique, the control system achieves high-precision tracking control and strong robustness.

IEEE ACCESS (2021)

Article Computer Science, Information Systems

A Robust Observer for Sensor Faults Estimation on n-DOF Manipulator in Constrained Framework Environment

Hoai Vu Anh Truong et al.

Summary: This paper proposes a fault-tolerant control design based on impedance control and backstepping sliding mode control algorithm for a serial hydraulic manipulator to address faults and uncertainties, achieving force and position tracking performance through mathematical modeling and fault estimation algorithm.

IEEE ACCESS (2021)

Article Computer Science, Information Systems

Robust Fault-Tolerant Control of an Electro-Hydraulic Actuator With a Novel Nonlinear Unknown Input Observer

Van Du Phan et al.

Summary: This paper presents a novel adaptive fault-tolerant controller for addressing disturbances, internal leakage faults, and sensor faults in a typical electro-hydraulic rotary actuator simultaneously. By introducing a nonlinear unknown input observer, a radial basis function neural network, and an adaptive law, high tracking performance, robustness, and fast convergence are achieved.

IEEE ACCESS (2021)

Article Computer Science, Information Systems

Active Fault Tolerant Control System Design for Hydraulic Manipulator With Internal Leakage Faults Based on Disturbance Observer and Online Adaptive Identification

Hoang Vu Dao et al.

Summary: This paper presents an active fault-tolerant control system design for a hydraulic manipulator with internal leakage faults and mismatched/matched lumped disturbances. It proposes a pair of matched and mismatched disturbance observers to estimate and compensate for disturbances, as well as a control reconfiguration law to switch to a fault-tolerant controller. The system guarantees position tracking performance and addresses the issue of faults in the control system.

IEEE ACCESS (2021)

Review Computer Science, Information Systems

A Survey on Active Fault-Tolerant Control Systems

Alireza Abbaspour et al.

ELECTRONICS (2020)

Article Computer Science, Information Systems

A Robust Double Active Control System Design for Disturbance Suppression of a Two-Axis Gimbal System

Dong-Hun Lee et al.

ELECTRONICS (2020)

Article Automation & Control Systems

Modeling and Robust Continuous TSM Control for an Inertially Stabilized Platform With Couplings

Jianliang Mao et al.

IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2020)

Article Computer Science, Information Systems

Accelerometer-Based Gyroscope Drift Compensation Approach in a Dual-Axial Stabilization Platform

Shutong Li et al.

ELECTRONICS (2019)

Article Computer Science, Information Systems

Switching Fault-Tolerant Control for DFIG-Based Wind Turbines With Rotor and Stator Current Sensor Faults

Kaishun Xiahou et al.

IEEE ACCESS (2019)

Article Computer Science, Information Systems

Anti-Disturbance Neural-Sliding Mode Control for Inertially Stabilized Platform With Actuator Saturation

Zhushun Ding et al.

IEEE ACCESS (2019)

Article Automation & Control Systems

Stability proof for a well-established super-twisting parameter setting*

Richard Seeber et al.

AUTOMATICA (2017)

Article Robotics

Research on the Cross-Coupling of a Two Axes Gimbal System with Dynamic Unbalance

Maher Abdo et al.

INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS (2013)

Article Automation & Control Systems

Strict Lyapunov Functions for the Super-Twisting Algorithm

Jaime A. Moreno et al.

IEEE TRANSACTIONS ON AUTOMATIC CONTROL (2012)

Article Automation & Control Systems

Image-Based Pointing and Tracking for Inertially Stabilized Airborne Camera Platform

Zdenek Hurak et al.

IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2012)

Article Automation & Control Systems

A Survey of Fault Detection, Isolation, and Reconfiguration Methods

Inseok Hwang et al.

IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2010)

Article Engineering, Civil

Modeling the Stochastic Drift of a MEMS-Based Gyroscope in Gyro/Odometer/GPS Integrated Navigation

Jacques Georgy et al.

IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS (2010)

Article Automation & Control Systems

Global analysis of the double-gimbal mechanism - Dynamics and control on the torus

Jason Osborne et al.

IEEE CONTROL SYSTEMS MAGAZINE (2008)

Article Automation & Control Systems

Inertially stabilized platforms for optical imaging systems - Tracking dynamic targets with mobile sensors

Michael K. Masten

IEEE CONTROL SYSTEMS MAGAZINE (2008)

Article Automation & Control Systems

Inertially stabilized platform technology - Concepts and principles

J. M. Hilkert

IEEE CONTROL SYSTEMS MAGAZINE (2008)

Article Automation & Control Systems

Principles of 2-sliding mode design

Arie Levant

AUTOMATICA (2007)

Review Engineering, Electrical & Electronic

Control and communication challenges in networked real-time systems

John Baillieul et al.

PROCEEDINGS OF THE IEEE (2007)

Article Automation & Control Systems

Time-delay systems: an overview of some recent advances and open problems

JP Richard

AUTOMATICA (2003)

Article Automation & Control Systems

Direct versus indirect line of sight (LOS) stabilization

PJ Kennedy et al.

IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2003)