Related references
Note: Only part of the references are listed.Valorization of biomass into amine-functionalized bio graphene for efficient ciprofloxacin adsorption in water-modeling and optimization study
Seid Kamal Ghadiri et al.
PLOS ONE (2020)
Engineering magnetic N-doped porous carbon with super-high ciprofloxacin adsorption capacity and wide pH adaptability
Yue Tang et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Adsorptive removal of Ciprofloxacin and Amoxicillin from single and binary aqueous systems using acid-activated carbon from Prosopis juliflora
Arunkumar Chandrasekaran et al.
ENVIRONMENTAL RESEARCH (2020)
Synthesis and comparison studies of activated carbons based folium cycas for ciprofloxacin adsorption
Jiaojiao Kong et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)
Evaluation of the activated carbon coated with multiwalled carbon nanotubes in removal of ciprofloxacin from aqueous solutions
Narges Sharifpour et al.
APPLIED WATER SCIENCE (2020)
Coating magnetic biochar with humic acid for high efficient removal of fluoroquinolone antibiotics in water
Jing Zhao et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2019)
Construction of carbon dots modified MoO3/g-C3N4 Z-scheme photocatalyst with enhanced visible-light photocatalytic activity for the degradation of tetracycline
Zhijie Xie et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2018)
Effects of Cu and CuO on the preparation of activated carbon from waste circuit boards by H3PO4 activation
Yujiao Kan et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Thermal degradation kinetics of waste printed circuit boards
Raslan A. Alenezi et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
Ciprofloxacin adsorption onto different micro-structured tourmaline, halloysite and biotite
Wenzhen Duan et al.
JOURNAL OF MOLECULAR LIQUIDS (2018)
Investigation of the influence of inert and oxidizing atmospheres on the efficiency of decomposition of waste printed circuit boards (WPCBs)
Anjan Kumari et al.
HEAT AND MASS TRANSFER (2017)
Response surface methodology approach for optimization of ciprofloxacin adsorption using activated carbon derived from the residue of desilicated rice husk
Binpeng Zhang et al.
JOURNAL OF MOLECULAR LIQUIDS (2017)
Fluoroquinolones biosorption onto microbial biomass: activated sludge and aerobic granular sludge
Vanessa R. A. Ferreira et al.
INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2016)
Modification of a magnetic carbon composite for ciprofloxacin adsorption
Haixin Mao et al.
JOURNAL OF ENVIRONMENTAL SCIENCES (2016)
Liberation characteristics after cryogenic modification and air table separation of discarded printed circuit boards
Cuihong Zhou et al.
JOURNAL OF HAZARDOUS MATERIALS (2016)
Comparison of activated carbons from epoxy resin of waste printed circuit boards with KOH activation by conventional and microwave heating methods
Yujiao Kan et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2016)
Constructing environment-friendly return road of metals from e-waste: Combination of physical separation technologies
Jujun Ruan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Oxidative degradation of triclosan by potassium permanganate: Kinetics, degradation products, reaction mechanism, and toxicity evaluation
Jing Chen et al.
WATER RESEARCH (2016)
Study of multi-step hydrometallurgical methods to extract the valuable content of gold, silver and copper from waste printed circuit boards
Ionela Birloaga et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2016)
The application of activated carbon produced from waste printed circuit boards (PCBs) by H3PO4 and steam activation for the removal of malachite green
Yujiao Kan et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Investigation of the thermal decomposition of printed circuit boards (PCBs) via thermogravimetric analysis (TGA) and analytical pyrolysis (Py-GC/MS)
Panagiotis Evangelopoulos et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)
Adsorption behavior and mechanisms of ciprofloxacin from aqueous solution by ordered mesoporous carbon and bamboo-based carbon
Xiaoming Peng et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)
Preparation of epoxy resin-based activated carbons from waste printed circuit boards by steam activation
Yujiao Kan et al.
MATERIALS LETTERS (2015)
Preparation of a specific bamboo based activated carbon and its application for ciprofloxacin removal
Y. X. Wang et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2015)
Optimization preparation of activated carbon from Enteromorpha prolifra using response surface methodology and its adsorption studies of fluoroquinolone antibiotics
Yuan Gao et al.
DESALINATION AND WATER TREATMENT (2015)
Comparative study of dry-mixing and wet-mixing activated carbons prepared from waste printed circuit boards by NaOH activation
Yujiao Kan et al.
RSC ADVANCES (2015)
New Technology for Separating Resin Powder and Fiberglass Powder from Fiberglass-Resin Powder of Waste Printed Circuit Boards
Jia Li et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2014)
Adsorption and cosorption of ciprofloxacin and Ni(II) on activated carbon-mechanism study
Yuanyuan Sun et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2014)
Thermogravimetric study of the decomposition of printed circuit boards from mobile phones
Nuria Ortuno et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2013)
Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): A review
Xiaoning Yang et al.
WASTE MANAGEMENT (2013)
Ciprofloxacin adsorption from aqueous solution onto chemically prepared carbon from date palm leaflets
El-Said Ibrahim El-Shafey et al.
JOURNAL OF ENVIRONMENTAL SCIENCES (2012)
Research on pyrolysis of PCB waste with TG-FTIR and Py-GC/MS
Cui Quan et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2012)
Adsorption characteristics of natural zeolites as solid adsorbents for phenol removal from aqueous solutions: Kinetics, mechanism, and thermodynamics studies
Rushdi I. Yousef et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Thermogravimetric kinetic analysis and pollutant evolution during the pyrolysis and combustion of mobile phone case
R. Font et al.
CHEMOSPHERE (2011)
Recycling of WEEE: Characterization of spent printed circuit boards from mobile phones and computers
Luciana Harue Yamane et al.
WASTE MANAGEMENT (2011)
Adsorption of ciprofloxacin on surface-modified carbon materials
S. A. C. Carabineiro et al.
WATER RESEARCH (2011)
Biosorption of cadmium metal ion from simulated wastewaters using Hypnea valentiae biomass: A kinetic and thermodynamic study
Rathinam Aravindhan et al.
BIORESOURCE TECHNOLOGY (2010)
Pyrolysis of fire retardant anhydride-cured epoxy resins
Maria Paola Luda et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2010)
Studies on bromination and evaporation of antimony oxide during thermal treatment of tetrabromobisphenol A (TBBPA)
Michal Rzyman et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2010)
Adsorption of Malachite Green dye onto activated carbon derived from Borassus aethiopum flower biomass
S. Nethaji et al.
JOURNAL OF HAZARDOUS MATERIALS (2010)
Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp mill
Jae-Min Yoo et al.
WASTE MANAGEMENT (2009)
Pyrolysis and debromination of flame retarded polymers of electronic scrap studied by analytical pyrolysis
M Blazsó et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2002)
Thermal formation of PBDD/F from tetrabromobisphenol A - a comparison of polymer linked TBBP A with its additive incorporation in thermoplastics
H Wichmann et al.
CHEMOSPHERE (2002)
Combustion of brominated flame retardants and behavior of its byproducts
S Sakai et al.
CHEMOSPHERE (2001)